Question about 1996 Chevrolet C1500

1 Answer

1996 chevy pickup code 0122. was told pedal position sensor. where is it located and how do i chage it or test it

Hard to start and if it does start and u touch foot feet and it dies code 0122 comes up when put on computer saying pedal position sensor no ones here ever heard of it

Posted by on

Ad

1 Answer

PO122 is a Throttle Position Sensor
An APPor ETC is the pedal position sensor
which is the gas pedal,all shop know that one
Remember the Toyota issues a few years back
NASA found nothing wrong with them
Don't think you have drive by wire in 1996
Your saying no one can look up a Code,odd isn't that
You can Google any codes you ever get & read for months

Posted on Jul 27, 2013

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1201 Answers

SOURCE: chevy 1996 s10 pedal position code?

Another name for it is throttle position sensor. It is usually on the side of the throttle body, usually black in color, has a 2 wire connection, attached with 2 screws. Needs replacing.

Posted on Mar 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 2010 Chevy impala. Reduced engine power. Service traction control and stability track. and check engine light. Codes are P2138 P2122 P0455


Electronic throttle control !
DTC P2120: Accelerator Pedal Position (APP) Sensor 1 Circuit
DTC P2122: Accelerator Pedal Position (APP) Sensor 1 Circuit Low Voltage
DTC P2123: Accelerator Pedal Position (APP) Sensor 1 Circuit High Voltage
DTC P2125: Accelerator Pedal Position (APP) Sensor 2 Circuit
DTC P2127: Accelerator Pedal Position (APP) Sensor 2 Circuit Low Voltage
DTC P2128: Accelerator Pedal Position (APP) Sensor 2 Circuit High Voltage
DTC P2138: Accelerator Pedal Position (APP) Sensor 1-2 Correlation

2009 Chevy Silverado P2138 Accelerator Pedal Position


Circuit/System Description
The throttle actuator control (TAC) system uses two accelerator pedal position (APP) sensors to monitor the accelerator pedal position. The APP sensors 1 and 2 are located within the pedal assembly. Each sensor has a 5-volt reference circuit, a low reference circuit, and a signal circuit.
Two processors are also used to monitor the TAC system data. Both processors are located within the engine control module (ECM). Each signal circuit provides both processors with a signal voltage proportional to pedal movement. The processors share and monitor data to verify that the indicated APP calculation is correct.

DTC P0455: Evaporative Emission (EVAP) System Large Leak

The control module tests the evaporative emission (EVAP) system for a large leak. The control module monitors the fuel tank pressure (FTP) sensor signal to determine the EVAP system vacuum level. When the conditions for running are met, the control module commands the EVAP canister purge solenoid valve OPEN and the EVAP vent solenoid valve CLOSED. This allows engine vacuum to enter the EVAP system. At a calibrated time, or vacuum level, the control module commands the EVAP canister purge solenoid valve closed, sealing the system, and monitors the FTP sensor input in order to determine the EVAP system vacuum level. The following table illustrates the relationship between the ON and OFF states, and the OPEN or CLOSED states of the EVAP canister purge and vent solenoid valves.

Nov 03, 2017 | Cars & Trucks

1 Answer

4x4 4.0l V6. What are the probable causes of DTCs P0112, P0117, P0122, P0513, P0556, and P0565?


code p 0112 refers to intake air temp (IAT) sensor --circuit malfunction===cause --wiring short to graound--wiring short to positive --IAT sensor ---ECM
code p 0117 refers to engine coolant temp (ECT) sensor--circuit malfunction=== causes --coolant thermostat---wiring short to ground--wiring short to positive ---ECT sensor
code p 0122 refers to throttle position (TP) sensor A/ accelerator pedal position (APP) sensor A low input === causes wiring short to ground--TP/APP sensor --ECM
There are 3 responses to p 0122 and all refer to TP switch /sensor plus wiring open /short to ground/ short to positive
code p 0513 refers to incorrect immobilizer key=== causes immobilizer system
code p 0556 refers to brake booster pressure sensor---circuit range / performance=== causes --wiring---poor connection---brake booster pressure sensor---ECM
code p 0565 refers to cruise control master switch. off signal --malfunction === causes wiring---cruise control master switch--ECM
by reading all the codes you will see that common causes are wiring problems and ECM so may be a quick check would be to replace the ECM with a known working unit first and work back from there

Feb 23, 2016 | 1994 Ford Ranger Supercab

1 Answer

Engine code po 0122


A P0122 code means that the the car's computer has detected that the TPS (throttle position sensor) is reporting too low a voltage. On some vehicles that lower limit is 0.17 - 0.20 volts (V).

Jun 23, 2014 | 1996 Chevrolet S-10 Pickup

1 Answer

What do codes 0122 and 1693 mean


p0122
trottle position or pedal position sensor/switch circuit,low input

the second one is a enhanced code have to know the model and make of car or truck to answer.

Aug 23, 2010 | Dodge Ram 3500 Cars & Trucks

2 Answers

Check engine light came on trouble shooting code is P 0122


Code P0122 is a TPS (Throttle Position Sensor) sensor out of range.

The operating range of the TPS is about .5 to 4.8 volts. .5 at idle 2.5 at half throttle and 4.8 at full throttle.

This can be checked easily with a scanner. But can be checked with a multi-meter.
P0122 Tjrottle Position Sensor low voltage

You can try replacing it for a start and see what happens
(location image)...

f1c255f.gif

Hope this help.

Mar 29, 2010 | 2005 Kia Sedona

2 Answers

1991 toyota pickup dies when you release the gas pedal


There are couple of things I would check out that would cause this problem.

1. The Mass Air Flow Sensor. It measures how much air is going into the engine. Should be located on top of air filter box.

2. The air tube that goes from the Mass Air Flow Sensor to the throttle body. Check for leaks that would bypass air from going through the Mass Air Flow Sensor.

3. The Throttle Position Sensor. Located on the throttle body. This tells the computer what position the butterfly plate is on the throttle body. You control this plate with the gas pedal..

Oct 11, 2009 | 1991 Toyota Pickup

1 Answer

Chevy 1996 s10 pedal position code?


Another name for it is throttle position sensor. It is usually on the side of the throttle body, usually black in color, has a 2 wire connection, attached with 2 screws. Needs replacing.

Mar 16, 2009 | 1996 Chevrolet S-10 Pickup

Not finding what you are looking for?
1996 Chevrolet C1500 Logo

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

80668 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...