Question about Toyota Land Cruiser
Posted by Anonymous on
I had to just Reset my Clock after the battery was disconnected on my Prado 120 series Grande, firstly turn ignition on and press the 2 outer buttons (of 4) in front of the clock for several seconds, ILLU will appear on the face, with the inner buttons you can turn the brightness/illumination of the clock up to down, then press the left hand button again and by using the inner buttons.....using the left hand inner button to adjust hours and the right hand inner to do minutes, then press the out right button several times to set. (during the last procedure be careful not to reset the Altimeter and the compass)
I hope this helps as this is the only thread on here about this
Posted on Mar 31, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hello! Turn the ignition switch on...Hold the master power window auto up switch for five seconds...Send a comment with results...
Posted on Apr 11, 2010
Hi, don't know if you figured it out, but I just (literally 10 minutes ago) calibrated the compass on my 2001 LandCruiser Prado by doing the following:
- Press the up and down arrows together until the inclinometer starts to blink.
- Then press the "Mode" button to switch to compass. The compass should start to blink.
- Drive your car in a 360 degree circle until the compass stops blinking.
- And that's about it.
Even though this is an old question I wanted to post the answer because I've been looking at this issue for a year and haven't found the solution online.
Please note that this page http://www.tlocuk.co.uk/forums/viewtopic.php?p=2302&sid=327bc81ab3b0160e82d7863b3e6417f5 pointed me in the right direction although the instructions there caused the inclinometer to be re-calibrated in my car. I had to tinker around and I figured out that if I pressed "mode", it switched to compass calibration.
Posted on Jan 20, 2011
when immobilizer is out of range trying engine start. but faintly engine not start, now immobilizer is in car but engine is not start. one signal alarm is blinking lights. how to reset this alarm of Prado 2007 model.
Posted on Sep 05, 2012
Tips for a great answer:
Apr 12, 2016 | 2005 Toyota LandCruiser Prado
Jan 18, 2014 | 2005 Toyota LandCruiser Prado
Jan 06, 2014 | 2007 Toyota Land Cruiser
Nov 02, 2010 | 2007 Toyota Land Cruiser
Aug 23, 2010 | 1988 Toyota Land Cruiser
Jun 17, 2010 | 2007 Toyota Land Cruiser
Apr 11, 2010 | 2004 Toyota Land Cruiser
Sep 14, 2008 | 1996 Toyota Land Cruiser
916 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: