Question about Cars & Trucks

1 Answer

Can I change a yaw censer - Cars & Trucks

Posted by on

1 Answer

Yes you can
You have to find it, obviously
You should know if it is bad or why replace it
Keep in mind,having a code does not mean you
have a failed sensor or need to replace something,
not until it is tested & fails.

Posted on Jul 26, 2013

  • 1 more comment 
  • Dan Jul 26, 2013

    Yes I had it tested they told me the yaw censer needed changed. Can I change it...were is it

  • Anonymous Jul 27, 2013

    Don't know where it is On my lincoln it is under the console cover Ask the shop that tested it I hope they tested it & not just scanned for codes,may not be the issue

  • Anonymous Jul 27, 2013

    You gave us no vehicle but we only use the site as you do & have to use the internet to find the answers

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I fix my stabilitrak on my 2010 chev impala


What's wrong with it ? Need more info . Light on ? The first thing to do would be to have the vehicle checked for DTC'S - diagnostic trouble codes ! Get a diagnostic direction , not just replacing parts . Need a professional grade scan tool . Plus reading how stabilitrak works would also be a good Idea . StabiliTrak General Motors Stability Control

Vehicle Stability Enhancement System (VSES)
The vehicle stability enhancement system (VSES) adds an additional level of vehicle control to the electronic brake control module (EBCM).
Yaw rate is the rate of rotation about the vehicle's vertical axis. The lateral accelerometer measures the sideways acceleration of the vehicle. The VSES is activated when the EBCM determines that the desired yaw rate and lateral forces do not match the actual attitude of the vehicle.
The desired attitude of the vehicle are calculated from the following inputs:
• The position of the steering wheel
• The speed of the vehicle
• The lateral, or sideways acceleration of the vehicle
• Yaw rate of the vehicle
• Master cylinder brake pressure
The difference between the desired yaw rate and the actual yaw rate is the yaw rate error, which is a measurement of oversteer or understeer. If the yaw rate error becomes too large, the EBCM attempts to correct the vehicle's yaw motion by applying differential braking to the appropriate wheel. The amount of differential braking applied to the left or right front wheel is based on both the yaw rate error and side slip rate error.
The VSES activations generally occur during aggressive driving, in turns, or on poor road conditions, without much use of the accelerator pedal. When braking during VSES activation, the pedal pulsations feel different than the ABS pedal pulsations. The brake pedal pulsates at a higher frequency during VSES activation.

There a number of DTC'S that can set .
DTC C0035-C0050
DTC C0110
DTC C0131
DTC C0161
DTC C0179
DTC C0186
DTC C0196
DTC C0201
DTC C0242 or P0856
DTC C0245
DTC C0292
DTC C0558
DTC C0561
DTC C0563
DTC C0710

Do you know what DTC'S are , and a diagnostic flow chart ?

Feb 21, 2017 | Cars & Trucks

1 Answer

2010 chevy impala service stabilitrakwarning keeps coming on


You should have it check for DTC'S diagnostic trouble codes .
SERVICE STABILITRAK is part of the ABS control module . EBCM - electronic brake control module . Could be a sensor problem , EBCM , yaw sensor an a couple other ones .
Vehicle Stability Enhancement System (VSES)
The vehicle stability enhancement system (VSES) adds an additional level of vehicle control to the electronic brake control module (EBCM).
Yaw rate is the rate of rotation about the vehicle's vertical axis. The lateral accelerometer measures the sideways acceleration of the vehicle. The VSES is activated when the EBCM determines that the desired yaw rate and lateral forces do not match the actual attitude of the vehicle.
The desired attitude of the vehicle are calculated from the following inputs:
?€¢
The position of the steering wheel


?€¢
The speed of the vehicle


?€¢
The lateral, or sideways acceleration of the vehicle


?€¢
Yaw rate of the vehicle


?€¢
Master cylinder brake pressure

The difference between the desired yaw rate and the actual yaw rate is the yaw rate error, which is a measurement of oversteer or understeer. If the yaw rate error becomes too large, the EBCM attempts to correct the vehicle's yaw motion by applying differential braking to the appropriate wheel. The amount of differential braking applied to the left or right front wheel is based on both the yaw rate error and side slip rate error.
The VSES activations generally occur during aggressive driving, in turns, or on poor road conditions, without much use of the accelerator pedal. When braking during VSES activation, the pedal pulsations feel different than the ABS pedal pulsations. The brake pedal pulsates at a higher frequency during VSES activation.

Jun 07, 2016 | 2010 Chevrolet Impala LT

1 Answer

Solution for code c 1336 toyota land cruiser 2008


it has to do with your vehicle stability and traction control. I would look to see if you left the yaw rate sensor unplugged
Standard Motor Products YA113 YAW Rate Sensor

Oct 07, 2015 | 2008 Toyota Land Cruiser V8

1 Answer

My 2003 cts fill like im driving with a flat tire. Then the service stability system light comes on my navigation. How do I now what to fix?


SERVICE STABILITY SYS
Refer to ABS Description and Operation in Antilock Brake System ! You need to take it an have DTC'S diagnostic trouble codes read ! That will point you to a diagnostic path !
Vehicle Stability Enhancement System (VSES)
The vehicle stability enhancement system (VSES) adds an additional level of vehicle control to the electronic brake control module (EBCM).
Yaw rate is the rate of rotation about the vehicle's vertical axis. The VSES is activated when the EBCM determines that the desired yaw rate does not match the actual yaw rate as measured by the yaw rate sensor.
The desired yaw rate is calculated from the following parameters:
?€¢
The position of the steering wheel


?€¢
The speed of the vehicle


?€¢
The lateral, or sideways acceleration of the vehicle

The difference between the desired yaw rate and the actual yaw rate is the yaw rate error, which is a measurement of oversteer or understeer. If the yaw rate error becomes too large, the EBCM attempts to correct the vehicle's yaw motion by applying differential braking to the appropriate wheel. The amount of differential braking applied to the left or right front wheel is based on both the yaw rate error and side slip rate error.
The VSES activations generally occur during aggressive driving, in turns or on bumpy roads without much use of the accelerator pedal. When braking during VSES activation, the pedal pulsations feel different than the ABS pedal pulsations. The brake pedal pulsates at a higher frequency during VSES activation.
If you do not know about this , I suggest you take it to a ASE certified repair shop that does !

Sep 13, 2015 | Cars & Trucks

1 Answer

I have a 2007 they suburban taho and the stabill track light is on


The Stability System is part of the anti lock brakes ! The place to start is
Diagnostic Starting Point - Antilock Brake System
Begin the system diagnosis with Diagnostic System Check - Vehicle .The Diagnostic System Check will provide the following information:
?€¢
The identification of the control modules which command the system


?€¢
The ability of the control modules to communicate through the serial data circuit


?€¢
The identification of any stored diagnostic trouble codes (DTCs) and their status

The use of the Diagnostic System Check will identify the correct procedure for diagnosing the system and where the procedure is located.
This Is going to be Greek to you probably ! This is where a up scale scan tool is needed , or a factory one ! Your going to need to have vehicle scanned for DTC'S diagnostic trouble codes ! Is the ABS light on as well ?
A sample of DTC'S
DTC C0186 00: Lateral Accelerometer Circuit

DTC C0186 5A: Lateral Accelerometer Circuit Erratic
DTC C0196 00: Yaw Rate Circuit

DTC C0196 5A: Yaw Rate Circuit Erratic
DTC C0252 00: VSES Sensor Uncorrelated
The Vehicle Stability Enhancement System (VSES) is activated by the electronic brake control module (EBCM) and calculates the desired yaw rate and comparing it to the actual yaw rate input. The desired yaw rate is calculated from measured steering wheel position, vehicle speed, and lateral acceleration. The difference between the desired yaw rate and actual yaw rate is the yaw rate error, which is a measurement of oversteer or understeer. If the yaw rate error becomes to large, the EBCM will attempt to correct the vehicles yaw motion by applying differential braking to the left or right front wheel.
This is a problem you should take to the dealer or a ASE certified repair shop ! Or you can try to reset the system by disconnecting the battery cables an touching the cable ends together for 60 seconds ! But if there is a real fault in the system ( bad sensor ) The light will come back on ! Maybe not right away ! A couple of days or weeks etc....
This

Aug 04, 2015 | Cars & Trucks

1 Answer

What does it mean when my 2008 trailblazer LT stabilitrac service light comes on?


Service Stability System Message The message center displays the service stability system message when any one of many VSES-disabling DTCs is set. The EBCM sends a serial data message to the IPC requesting this display.
It means there is a problem an till you get it fixed the stability control system is disabled ! ( EBCM ) electronic brake control module Has detected a problem an set a DTC - diagnostic trouble code in it's memory an had the message displayed !
Vehicle Stability Enhancement System (VSES)
The vehicle stability enhancement system (VSES) provides added stability during aggressive maneuvers. Yaw rate is the rate of rotation about the vehicle's vertical axis. The VSES is activated when the electronic brake control module (EBCM) determines that the desired yaw rate does not match the actual yaw rate as measured by the yaw rate sensor.
The desired yaw rate is calculated by the EBCM using, primarily, the following inputs.
?€¢
The position of the steering wheel


?€¢
The speed of the vehicle


?€¢
The lateral, or sideways acceleration of the vehicle

The difference between the desired yaw rate and the actual yaw rate is the yaw rate error, which is a measurement of oversteer or understeer. When a yaw rate error is detected, the EBCM attempts to correct the vehicle's yaw motion by applying brake pressure to one or more of the wheels. The amount of brake pressure which is applied varies, depending on the correction required. The engine torque may be reduced also, if it is necessary to slow the vehicle while maintaining stability.
VSES activations generally occur in turns during aggressive driving. When braking during VSES activation, the pedal may pulsate. The brake pedal pulsates at a higher frequency during VSES activation than during ABS activation.


It

Jun 19, 2015 | 2008 Chevrolet Trailblazer

1 Answer

High idle replaced cat and o2 sensor also pvc and tube?


i had a high idle problem on my Chevy blazer.there is a air mix censer that controls the idle,it cost a $100.00.I changed it and fixed my problem.IBOUGHT A SHOP MANUAL AND IT TOLD ME ABOUT THE IDLE CONTROL CENSER!

Oct 30, 2012 | Cars & Trucks

1 Answer

1994 dodge intrepid wont start


did you check the gas filter or fuel pump? That would be my first thing before all the other stuff you did. make sure it is getting fuel.

Apr 10, 2012 | 1999 Dodge Intrepid

2 Answers

Pls.where can i find the yaw rate sensor on 2001 toyota sequoia?


Hello. Welcome to FixYa. The yaw rate sensor is attached to the steering column.

Oct 04, 2011 | 2001 Toyota Sequoia

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...