Question about 2006 Nissan Sentra

Open Question

Remove lighter socket in center console - 2006 Nissan Sentra

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove the ash tray in a 1998 ford taurus lx


Ash Receptacle Console Mounted
Removal
  1. Remove beverage holder by carefully unsnapping front portion using a flat-blade screwdriver. Grasp beverage holder and unsnap from console panel (045A36) .

    swh~us~en~file=k23657a.gif~gen~ref.gif
  1. Open ash receptacle (30702) and move gearshift lever (7210) to 1 position.
  1. Grasp console top panel (044D90) and pull rearward to unsnap from console center finish panel. Disconnect electrical connectors from cigar lighter socket and retainer (15055) and lamp assembly.
  1. Remove console top panel from vehicle.

    swh~us~en~file=k23664a.gif~gen~ref.gif
Installation
  1. Follow removal procedure in reverse order.
Instrument Panel Mounted
Removal
  1. Disconnect battery ground cable (14301) .
  1. Open ash receptacle .
  1. At RH rear of ash receptacle, disconnect electrical connectors to cigar lighter socket and retainer .
  1. Depress locking tab on LH rear and RH rear corners of ash receptacle toward center and pull ash receptacle from instrument panel (04320) .
  1. Unscrew retainer from socket and remove cigar lighter socket and retainer .
Installation
  1. Follow removal procedure in reverse order.
c3090c04-8e43-44a7-8627-af5c7da3b8d1.gif

Sep 19, 2014 | 1998 Ford Taurus

1 Answer

How do you remove a cigarette lighter socket


I'm assuming this is the lighter in the center console by the beverage holder? If not I'll need more details.
.
First you have to make sure the power is cut to it, so either pull the fuse or disconnect the battery. Warning, disconnecting the battery WILL reset things like radio settings and clocks.
.
Now get yourself a flat-head screwdriver. You want to carefully unsnap the front of the beverage holder console, and once the front is unsnapped you can lift it to unsnap the rear of the beverage holder console and remove it.
.
d2146de7-cce2-408d-aaa2-93053051eb97.gif
.
Now grasp the top part of the cigarette lighter's panel and pull it straight out. Make sure you don't yank on the electrical connections. I'd suggest unplugging them so you can work on the lighter easier.
.
68a006cd-55c0-4023-9795-94d0e568a56b.gif
.
From there you simply have to unscrew the retainer from the socket and remove the lighter.
.
If you're installing a new one, just reverse the process.

Jul 22, 2014 | 1999 Mercury Sable

1 Answer

Broken cigarett lighter in a 2004 impala


This is a pain! You may need to remove the console to get access to the back of the lighter. When you look inside the lighter socket there should be 2 small square holes in the metal sides 180 degrees apart. The plastic bezel has corresponding bumps that fit in the holes and hold the lighter in. Try to push them in while pulling on the lighter socket.

Apr 20, 2014 | 2004 Chevrolet Impala

1 Answer

How do i replace the fuse for the lighter in my '99 chevy lumina?


Circuit Protection Underhood Electrical Center #1 Underhood electrical center #1 gm-06-00-703.gif
Underhood Electrical Center #2 Underhood electrical center #2 gm-06-00-704.gif
---
I didn't see the cig lighter mentioned in my online resource, but with my experience on GM vehicles, the under dash driver's side fuse box usually has a cig lighter fuse listed. If not, then you'll have to get a fuse tester and test each and every fuse until you find the burnt out one.

If the fuse is not burnt out, there may be a broken wire behind the console.

Console Removal & Installation Chevrolet Lumina & Monte Carlo To Remove:
  1. Disconnect the negative battery cable after first disabling the Theftlock® feature of the radio, if equipped.
  2. Remove the front floor console trim plate using the following procedure:
    • Remove the cigarette lighter.
    • Remove the transaxle shift handle.
    • Remove the front floor console trim plate by unsnapping from the console.
    • Detach the automatic transaxle control indicator socket and bulb from the trim plate and detach the electrical connector from the trim plate.
    Console mounting (Chevrolet models shown) 88000g40.gif

  3. Remove the CD storage bin at the front of the console by unsnapping it.
  4. Raise the console armrest and remove the compartment mat. Remove the screws from console.
  5. Detach the electrical connectors and remove the front floor console from the vehicle.
To Install:
  1. Connect the electrical connectors and position the console on the floor.
  2. Install the screws and the compartment mat. Start with the front right console retaining screws and continue in a clockwise order.
    • Tighten the screws to 106 inch lbs. (12 Nm).
  3. Install the CD storage bin.
  4. Install the console trim plate.
  5. Connect the negative battery cable.

Oct 17, 2010 | 1999 Chevrolet Lumina

1 Answer

2003 mitsubishi eclipse gt, how to remove the center console to fix the lighter socket? I tried to remove it by taking off the screws on either side of the console, but there is still something securing it...


if the cig lighter socket is not working, it may simply need a fuse. if you have your car's manual, check to see where your fuse panel is. inspect the fuse(s) and see if its blown, damaged or even darker inside than the others. if so pull out the fuse and replace it with a new one. walmarts auto center usually sells some cheap ones but make sure you get the right fuse. super walmart usually has a mini computer where you can find out.

Mar 18, 2010 | 2003 Mitsubishi Eclipse Spyder

2 Answers

Lighter plug wont work no blown fuse


sometimes there is a seperate fuse for just the lighter in the wiring behind the lighter socket you will have to either remove the socket or find the wiring under the dash to see if their is a fuse and replace it if it is worn or even possibly the connections to the socket have worn or become disconnected

Sep 03, 2009 | Mazda Protege Cars & Trucks

1 Answer

My 2004 Audi A4 Cigarette lighter socket surrounding broken


Hello, hope this info helps...(subytech1)...Cigarette Lighter In Center Console, Removing And Installing (Vehicles Up To 10.04)

Special tools, testers and auxiliary items required




  • Torque wrench V.A.G 1783



1-Cigarette lighter
  • Removal:
  • Remove center console.
  • Turn center console - 4 - around.
  • Remove two bolts - 3 - on cigarette lighter - 1 -.
  • Disconnect harness connector - 2 -.
  • Remove cigarette lighter - 1 - from recess - 5 -.
  • Installing: Installation is reverse of removal.
2-Connector3-Screws, (2x)
  • Tightening torque 2 Nm
4-Center console5-Cut-out

Aug 07, 2009 | 2004 Audi A4

1 Answer

Chrysler Neon 02 get access to cigarette lighter


Yah, usually about 4 clips I believe, near the corners. Tried a quick pull eh? If you don't want to go through all of that, by a 12vdc test light if you don't have one already, and very carefully & steady (don't touch side & bottom at same time, you'll pop the fuse) touch probe at dead center of the socket, with other end attached to good ground, it will light up if power there. Or, take fuse out for lighter, and use a screwdriver or something to scrape & clean the contact at bottom center of the socket, and then replace fuse, & try socket to see if it's working.Sometimes it's just a dirty contact.

Dec 19, 2008 | 2006 Chrysler Neon

Not finding what you are looking for?
2006 Nissan Sentra Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...