Question about Mitsubishi Colt

1 Answer

Windscreen washer not working

Windscreen Washer bottle water level good. Tubing good. Spray nozzles clear. No fuse allocated. No audible sound that pump is operating. Windscreen Washer pump u/s? Thank you

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Most likely the pump (motor) is gone and needs replacement. However, it is worth checking that fuse allocated to windscreen washer is intact. Furthermore, you may also need to check the wiring for flow of current at lever end (handle on the steering wheel) and wires connecting to pump on the water reservoir.

Posted on Jun 17, 2014

  • Dean Reese
    Dean Reese Dec 02, 2014

    I'm not sure why it's not working properly for you. I would suggest taking it into a car service company to see if they can help you. They should know how to fix it or possibly replace it for you. This should help you the most. Good luck and I hope you figure everything out that you need! http://www.premierwindscreens.com.au

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 29 Answers

SOURCE: windscreen washer not working - honda ascot innova 1993

the motor is at the bottom of the bottle there should be a couple of screws that you will have to remove and it should then be able to pull it out to replace to motor/

Posted on Mar 06, 2009

goofduck
  • 490 Answers

SOURCE: Hyundai Santa Fe Windscreen Washer Motor Fault

try taking a pin and cleaning the holes on the squirters and if that does not work check the washer pump it is located on the washer fluid tank

Posted on Apr 17, 2009

  • 5 Answers

SOURCE: Windscreen washers won't work. Water getting to

Open the bonnet. Use a 10mm socket to remove the bolt holding the water bottle to the shell of the car. Disconnect the 2 eletrical connections to the water bottle. The water bottle will now pull out. Remove the little pump by pulling it up from its housing in the water bottle. You will now see a little black, rubber 'thing'. Remove this and you will have the filter. Thoroughly wash this and remove and of the grime. Take a hose and rinse the water bottle itself thoroughly, romoveing any dirt or cleaner fluid. Reverse the process (put it all back together). This will sort it out.
The problem is using viscose based cleaner fluids. BMW will charge you £120.00 + VAT to resolve this problem. I did it last night in 10 minutes for Zero pounds sterling. Then use an ethanol based cleaner fluid (Lidl £1.49 for a litre, window spray cleaner). BMW will charge you £15.00 + vat for 500 ml.
I am not mechanically minded, but this job was a piece of ****. Good luck!

Posted on Jun 12, 2009

  • 1986 Answers

SOURCE: where is the windscreen washer bottle for a FIAT SIENTO

It'll be located near the front end of the car... black cap with a white tube

Posted on Aug 12, 2009

  • 1244 Answers

SOURCE: Peugeot 407 not 405 blocked windscreen washer

its in the pump it self mate ya have to take the pummp out of the bottle

Posted on Jan 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Windscreen water jets not working


Washer fluid spray nozzles??? They have a pump which maybe bad or the fuse in the circuit is bad.

OR the hoses the feed the nozzles are bad, cracked or disconnected.

Jan 11, 2016 | Fiat Punto Cars & Trucks

1 Answer

Hello Hi, have 2.5D4D bakkie have a problem with windscreen washer jet. Doesn't have enough pressure for the water to reach the windscreen, could it be the pump or the nozzles on the bonnet?


Be carefull remove the w washer hose on nozzle they break easy try heating that little hose a bit its easyer to remove after you did remove spray air from the outside on the nozzle on the hood or bonnet for u debrie will come out make sure its clean reinstall
And try it

Apr 09, 2015 | Cars & Trucks

1 Answer

Sprinter 2009 driverside windscreen no working how I fix


Many cars have problems with algal growth in their windscreen washer bottles (or the lines or nozzles) which causes them to be blocked and not work. There's no solution but to dismantle the system and flush the algae out. But to prevent recurrence, drop a copper coin into the washer bottle. Copper is an excellent algaecide.

Sep 16, 2013 | Cars & Trucks

1 Answer

Weak flow from one windscreen washer non from other on kia rio


There is a very good possibility that the nozzeles are plugged with "debris". Try using compressed air to force the "debris" out of the nozzles. This is best done by removing the lines going to the nozzles and and blowing the compressed air through the nozzles from the directon in wich they are intended to spray. A toothpick or metal pick may work as well to loosen the "debris" depending on the size of the nozzle.

Nov 03, 2012 | 2009 Kia Rio

1 Answer

Windscreen washers have stopped working but the fuse is ok and the wipers are still working


Check if you have fluid in the washer bottle. Take a fine needle and clear out the nozzles that spray on the screen, try the washer again, you should be able to hear the motor running. If there is no sound, check the motor/pump, it will be located near or in the washer bottle. The wiper and washer normally share the same fuse.

May 09, 2011 | Peugeot 405 Cars & Trucks

2 Answers

My front windshield wiper pump does not pump washer fluid but the wipers work fine , the back wiper and pump works


First make sure you have water in washer reservoir, with ignition on reds (not started) then get someone to operate washer while bonnet is closed otherwise the wipers (may come on) may damage your bonnet (would also be a good idea to throw some water on your screen before commencing), listen for a buzzing noise, if you can hear that noise than your washer motor is ok, if not - if fitted with fuse check it and if fuse is ok than your motor needs attention. If motor is ok than while someone is operating the washer motor look under the car to see if there is any water leaking, if there is water leaking than the hose going from your washer bottle to your washer nozzles has come off somewhere, visually check this hose, usually small diameter and clear in colour, reconnect or replace it. If there is no water leak and you have full water and motor is working, than your nozzle, usually located on the bonnet or wiper arms are blocked, this mainly happens after polishing the vehicle. There are 2 main ways of cleaning these nozzles, easiest way is to get a fine pin and poke it several times, this will clean it 85% of the time, if it does not work than you need to find the hose that connects to it and pull apart at a join, closer to the nozzle the better, and give it short burst of compressed air, have to be careful not to pop the hose out at the nozzle as some of them are located in really awkard points, hope this helps.

Apr 12, 2011 | 2004 Toyota Matrix

1 Answer

1999 ford focus estate diesel.Windscreen washer bottle has black mildew in it.how do i get it out as it blocks the washer jets.


Remove the windshield washer reservoir and give it a good cleaning with a mixture of 1 part bleach and 3 parts water. You may be able to clean it without removing the reservoir by flushing it throughly and the cleaning it while still on the vehicle with the bleach mix. After it is throughly cleaned put a bleach mix in the reservoir and disconnect the hoses from the spray nozzles and run the washer until the hoses are clean. Use a needle to clean out the nozzles, and the connect the hoses and run the washer until the nozzles are clear. Remove the bleach mix and then fill the reservoir with a commercial windshield washer fluid. I recommend Rain X.

Mar 07, 2010 | 2000 Ford Focus

1 Answer

Peugeot 407 not 405 blocked windscreen washer


its in the pump it self mate ya have to take the pummp out of the bottle

Jan 17, 2010 | 2005 Peugeot 405

1 Answer

Front washer doesn't work


Take a tooth pick and clean out the small hole in the spray nozzle. These get clogged from car wax, dirt etc. Do not use anything other than a wooden toothpick to clean the nozzle.

Jun 02, 2009 | 1997 Hyundai Accent

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

543 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...