Question about Cars & Trucks

1 Answer

2008 chevrolet colorado air filter system

There is a component connecting to the air filter in 2008 chevrolet colorado pic up, i want to knw the name and how is fixed. wished to show the image

Posted by on


1 Answer

MAF Sensor ?
Google MAF Sensor & your vehicle & read up
All you can do is clean it
CRC MAF Cleaner

Posted on Jul 26, 2013


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 82 Answers

SOURCE: oil filter change Cobalt 2008 Chevrolet

the oil filter is located at the upper side , front of the motor it s a cartridge filter no like regular filters, , you will see a plastic black cap under the intake manifold, will need a gid range

Posted on Sep 03, 2009

  • 364 Answers

SOURCE: how do you change the differential pinion seal on

This needs to be done by a qualified mechanic as there are tolerances and special tools needed, call around to get the best quote and prompt attention. Good luck

Posted on Nov 20, 2009

  • 335 Answers

SOURCE: 2005 chevrolet colorado, 82,000mls reduced power,

Hello. this is normally a problem with the elctronic throttle control system. you will need to have the system scanned for trouble codes for proper diag

Posted on Jun 19, 2010

  • 5 Answers

SOURCE: how do i change the cabin air filter on a 2008

The Cabin air filter is located under the cowl on the passenger side (below the bottom of the windshield). There is just one push type retainer in the outside corner of the cowl the needs to be pulled out and the cowl cn be pulled up just far enough to remove and install the cabin air filter, which just slides in and out.

Posted on Jan 19, 2011


Posted on Feb 19, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why is the Blower motor blowing sand like material out of the air vents?

About 13,900 results (0.77 seconds) Search Results

    [PDF]Owners Manual - Chevrolet Chevrolet1. 2008 Chevrolet Colorado Owner Manual M ..... belt out all the way, you may engage the child ...... Remove any additional material from the seat such as ......lowered or raised, because the vehicle may blow a fuse. ..... ice, or sand without damaging your transmission, ...... H(Vent): Select this mode to direct air to the.

    [PDF]2016 Chevy Colorado Owner's Manual - Chevrolet ChevroletAir Vents 0 189. 2. ..... These systems control the heating, cooling, and ventilation. Climate Control ... shift into and out of the different ...... Q: If my vehicle has airbags, why .... Like all occupants, they are more likely to be seriously injured if they do not...... moving to avoid getting stuck. Traction changes when driving on sand.

    [PDF]2015 Chevrolet Colorado Owner's Manual ChevroletNov 19, 2014 - Chevrolet Colorado Owner Manual (GMNA-Localizing-U.S./Canada- ...... sand, mud, or snow, and while .... stop as soon as possible and inflate ....unintentionally moving the key out ...... Like all occupants, they are more likely to be seriously injured if they do not ...... Air vents blow warm air on the side.

Feb 08, 2016 | 2008 Chevrolet Colorado 2WD

1 Answer

How do i replace ignition switch in 2004 chevy colorado

Preliminary Procedures
  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  3. Remove the lower steering column trim cover. Refer to Steering Column Trim Covers Replacement .
Ignition Switch Electrical Connector
Ignition Switch Screw (Qty: 2)
0.74 N?·m (7 lb in)
Ignition Switch
  1. The ignition lock cylinder must be in the run position prior to removal of the ignition switch or damage to the components can occur.
  2. Reprogram the theft deterrent system. Refer to Programming Theft Deterrent System Components .

Feb 07, 2015 | 2004 Chevrolet Colorado

1 Answer

I have a 2008 Chevy Colorado and today my temp

when a temp gauge drops to cold ,it indicates a problem in the cooling system
temp gauge sender units need water to activate the resistance that makes the gauge read so a falling gauge indicates no water around the sender unit --- air lock in the system--faulty wire connection to the gauge sender unit
the ac unit is not connected to the temp gauge so there may be another separate problem there
the temp sensor is an entirely different unit to the temp gauge sender unit and the short term working would be from an altered coolant level from changing that sensor --air lock in system
the temp sensor connects to the ECM to activate the fans and monitor engine operating temp so as to keep the air/fuel mixture exact for the engine conditions
the temp sender unit just makes the temp gauge read
a faulty thermostat will either be stuck open and the engine temp will take a long time to rise or it will be stuck closed and that will cause an overheat very quickly

Sep 11, 2014 | 2008 Chevrolet Colorado

1 Answer

How do you change out a fuel pump on a 2008 chey colorado

check air filter to see if its clean, spark plugs and wires, tire pressure make sure all tires have the correct pressure, wheel alignment will waste fuel. This is just a few things that come to mind. If check engine light is on go to any auto parts store, and they will read the problem code for free. If its on, you may have a bad 02 sensor. That may be the cause of high fuel consumption. Good-Day!

Jul 25, 2014 | 2008 Chevrolet Colorado Crew

1 Answer

My husband drives a 2007-2008 Chevy Colorado as a work vehicle. Sometimes when he accelerates the vehicle will stall out, his work has had it in to the shop and ran a scan on it and it said nothing is...

Get the fuel pressure checked.If the fuel pressure checks out low,then its a fuel pump and clogged fuel filter related problem.If fuel pressure checks out ok then get the spark plug to coil pack voltage as well as connection checked.This will help to start the troubleshooting.

Nov 11, 2010 | 2008 Chevrolet Colorado 2WD

1 Answer

2005 chevrolet colorado, 82,000mls reduced power, replaced fuel filter, air filter, and replaced all bad fuses. after i replaced the 02 oxygen sensor fuse, it work a-ok, then after i went to the bar that...

Hello. this is normally a problem with the elctronic throttle control system. you will need to have the system scanned for trouble codes for proper diag

Apr 03, 2010 | 2008 Chevrolet Colorado 2WD

1 Answer

My engine symbol came out on my 2006 colorado and i checked it with the the computer and it gave me p0171

So many different variables can cause that code, it is impossible to help you directly with out any further information.

Is the intake stock? Have you worked on the truck recently or had the truck worked on recently? Have you installed a home made intake or after market intake kit?

Loose or removed oil fill cap
Disconnected valve cover breather line
Mushroom filter installed on valve cover breather line
Misc. Vacuum leaks on intake system

Colorado systems are different than a typical positive pressure system. It is drawing air from under the hood through the mushroom filter into the engine because there is a vacuum at the breather port on the valve cover. You can't modify the newer engines like the older ones. The sensors are to sensitive to change. Thus you start running rich or lean because the reading are wrong and the PCM is correcting the fuel flow improperly.
Thank you for using Fixya and good luck and also you may want to try to clean your MAF sensor if you have not modified any components.

Mar 25, 2010 | 2006 Chevrolet Colorado

1 Answer

What does p2444 code mean on a 2008 chev colorado with a 2.9 eng.

it means the secondary air injection system pump is stuck on,could be a bad relay keeping the pump on,hope this helps

Oct 15, 2009 | 2008 Chevrolet Colorado 2WD

1 Answer

Passenger Low Beam Headlight needs replacement!!!

You could remove the air filter cover and then you will be able to reach the bulb.

Apr 12, 2009 | 2004 Chevrolet TrailBlazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides