Question about Cars & Trucks

1 Answer

My Chevy venture 2002 van doesn't start. Good

Posted by on

Ad

1 Answer

You replace parts as part of your preventative
maintenance program,not to solve a problem
When working on a problem only component testing
will find the issues
You need to check for fuel pressure at the motor with a gauge
You check spark with a test plug you buy,not ground a plug
or wire on the vehicle
You can check for compression or cylinder leak down
to test some mechanical issues
I would assume ALL Fuse & links have been checked,as
well as battery voltage 12.6 v or more & cables etc
The ignition switch could be bad,turns starter but not all
the internal contacts are good

Posted on Jul 26, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 10 Answers

SOURCE: 2000 chevy venture van idle high and the jerks

distributor is advanced

Posted on Sep 11, 2009

johnjohn2
  • 5763 Answers

SOURCE: My chevy express van 1500 cranks but wont start

test and see if you have spark and fuel preasure, you may have bad feul pump, common problem is the fuel pump goes bad, but check before replacing.

Posted on Oct 01, 2009

MNfisherman
  • 11896 Answers

SOURCE: Hi there I have a

Check the crankshaft position sensor. #1 cause of no spark

Posted on Sep 02, 2010

cooter_01
  • 43 Answers

SOURCE: 2002 Chevy Express 2500, 5.0. Cranks but won't

FUEL PRESSURE MUST BE 62 LBS. OR GREATER OR IT WILL NOT GROUND INJECTORS, IF ITS OK THEN CHECK YOUR GRAY 12V SUPPLY TO PUMP AT CRANK-UP, YOU MAY HAVE A POOR IGNITION SWITCH.

Posted on Nov 26, 2010

  • 878 Answers

SOURCE: 1989 Chevy 1500, 5.7 engine..

change out your distributor cap and rotor button

Posted on Jun 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 2002 chevy venture and the low oil pressure light came on with a loud dinging sound, shut the van off and now it wont crank


Did you check crankcase oil level? Did the engine over-heat? Is the engine seized? If the engine is seized, you may have internal engine damage? Can you turn the crank by hand? If you remove accessory belt and spark plugs, should be easier to turn.
I don't know if your oil pump might be faulty?

Cranking is starter motor action, engine turns over. When you talked about oil pressure, it got me worried, if that's ok, have a helper crank it while you check for spark at the spark plugs, if spark everywhere, use a gage and check proper fuel pressure. Also, check fuel injector pulse. Any applicable trouble codes?

Feb 25, 2017 | 2002 Chevrolet Venture

1 Answer

My 2002 chevy venture won't start and I can't hear the fuel pump going on,after trying quite a few times an jumping my battery then the fuel pump will start working and the van will start up.After two...


Try cycling the the key a bunch of times first before you crank the engine the fuel pump could be weak or the filter getting plugged start by checking fuel pressure first also using a scan tool and checking for codes you can use the scan tool for check your crank signal

Feb 13, 2015 | Cars & Trucks

1 Answer

How do you replace an ignition switch on a 2002 chevy venture van? I have a 2002 chevy venture van and have had a problem with the starter staying engaged. I replaced the started and it fixed it...


So what it only does it in park or neutral ! The vehicle starting circuit is only suppose to let it start in park or neutal . Park neutral safety switch won't allow B+ voltage to S terminal on the starter solenoid unless the vehicle is in park or neutral . It's probably the starter relay contacts stuck closed . You really should learn how it works before guessing as to the problem . Plus learn automotive electrical testing ! The ignition switch when turned to the start position send's a voltage signal to the PCM - engine computer .The PCM will energize the starter relay to crank the engine . PCM / ABS 10amp fuse in the I/P fuse box supply's B+ voltage to the park / neutral safety switch . When in park or neutral the B+ voltage goes through the control side of the relay to the PCM which will supply a ground to energize the starter relay .

Jun 17, 2017 | 2002 Chevrolet Venture Passanger

1 Answer

How do reset the security system on a 2002 chevy venture van? and it will not start


Good morning, I am having a problem starting my 2000 chevy venture. I believe its the security system acting up, can anyone tell me how to reset the vechile's security system?

Jul 16, 2010 | 2000 Chevrolet Venture

1 Answer

2000 chevy express 1500 van having starting issues


Start with fuel system. Listen for fuel pump humm at fuel tank No humm check wiring to pump for power. Then check for spark at plugs and wires. Remove wire from coil and hold near engine and see arch when you crank. No arch. Replace ignition Modular inside distributor cap or cap or rotor

Feb 04, 2010 | 2000 Chevrolet Express Cargo

3 Answers

2000 chevy venture doesnt start


check to make sure the security light is not on if it is the van will have spark but no injecter pulse the best way to solve this issue is to have the original igniton key and put it in the igniton in the run position and leave it on for 10 minutes then the light will flash then try to start the van

Jul 15, 2009 | 2001 Chevrolet Venture

2 Answers

2003 Chevy Venture misfiring


The injector is a good possibility, although you should check for spark in the wire first, as the electrical is the weakest link in the system. Put a spare plug in the end of the wire with the plug resting on metal, then have someone crank the van to see if you have spark that far, test and replace spark plug, (do not get shocked!) then look into a new injector or a good cleaning.

Dec 22, 2008 | 2001 Chevrolet Venture

2 Answers

Lights dimming and brightening on 2000 Chevy Venture


2000 chevy venture run good but my lights flickers and have to jump. After I jump the van and put my meeter on the battery its reading 14.volts at idle. I can drive around to store cut the van off come out it starts fine leave it overnite and it don't started.

Nov 21, 2008 | 1999 Chevrolet Venture

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...