Question about Cars & Trucks

Open Question

HAND BRAKE LIGHT WILL NOT GO OUT MK2 MONDEO

HAND BRAKE WARNING LIGHT WILL NOT GO OUT WHEN HANDBRAKE IS RELAESED

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 345 Answers

SOURCE: Handbrake in VW Passat 2007 got Stuck

a very common fault is the switch,the calipers are not much better,they will be able to sort it for you but they are bad news for a modern car !!

Posted on Jan 19, 2009

Ad
  • 1 Answer

SOURCE: The hand brake warning light is showing yellow when the handbrake is not on plus the the panel is showing a further warning of an exclamation mark within a triangle within an incomplete circle. What d

It sounds like the DSC fault that I have on my 320ci, apparently I need a new steering angle sensor.

Posted on Jun 04, 2009

polarcycle
  • 1392 Answers

SOURCE: flashing hand brake light is on give,s 3 beeps

Yes. Both lights usually come on when there is an ABS problem detected whereas the brake light will usaully only come on by itself with the hand brake or low fluid.

Posted on Jun 05, 2009

  • 4874 Answers

SOURCE: Ford Mondeo Mk3 Estate 2L. Air bag / seat belt Warning Light

Common fault on FORD
Usually due to a poor connection in the YELLOW PLASTIC CONNECTOR underneath the passenger seat.


Just push it together properly and it should clear the AirBag fault


Posted on Sep 06, 2009

  • 4874 Answers

SOURCE: ford mondeo mk2 wiring

The easiest option is to purchase a HAYNES WORKSHOP MANUAL.

where there are all the wiring diagrams in the rear (Available on Ebay etc)

If you have a particular Mondeo problem, then this free site can be very useful

http://www.mirez.co.uk/map.htm

Posted on Sep 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On my 2005 Renault Laguna, the electronic handbrake works fine but warning light is on even when handbrake is released, any ideas.


HI
IT SI THE SIMPLE PROBLEM YOU CAN HANDLE THIS YOU JUST CHECK THE WIRRINF INSIDE THE HANDBRAKE IT MUST NOT IN THE POSITION JUST CHECK THIS OR LUBE THE HANDBRAKE PART WITH SPRAY IF THERE IS PROBLEM IN THE HANDBRAKE LIKE JAMMED IT WILL RELAESE AND ENJOY THE RIDE

Jun 22, 2015 | Cars & Trucks

2 Answers

Red Handbrake warning saying Apply handbrake and not starting


I familiar with this setup, but the car should start with the parking brake on. I could see it warning you if you try to move it with brake set, or maybe even shutting off engine then, but I would never think it would prevent engine from starting. Is this a stick shift or automatic. Make sure transmission is in neutral or park, clutch depressed.

Mar 21, 2015 | 2005 Renault Laguna 1.9

3 Answers

How do I fixed if my car hand brake stuck 2001 toyota coralla manual


There are several things that can make a hand brake stick on. It possible the cable attached to the leaver has come off it guide. There is a cable running from each rear wheel to the handbrake leaver , a inner cable running through a outer housing , chick that the inner cable is free to move back and forward . if all the cables are free to slide adjust the rear brakes and hand brake as instructions . Slacken off the hand brake cable adjustment. Jack up the rear wheals and adjust the brake shoes till the brakes lock, then back off till the wheels are free to turn. Then pull the hand brake leaver on two clicks and adjust the hand brake cable till the rear wheels just start to bind, release the hand brake leaver and check the wheels are free to turn.

Nov 27, 2014 | 2001 Toyota Corolla

2 Answers

My red handbrake symbol keeps flashing what does this mean please


The handbrake light is usually not the handbrake light, it is a warning light for the whole braking system. You could have a problem with the abs system, low brake fluid in the master cylinder or brake pads worn down.
The brake fluid reservoir is easy to check, just lift up the hood and it should be right there mounted on top of the brake booster, in line where the brake pedal is.
The brake pads on modern vehicles have sensors that warn you when they need replacement, so have them checked.
Finally of course, you could have a loose wire on the handbrake warning switch which is mounted at the base of the handbrake, or if you're very lucky, you might just need to drop the handbrake just a fraction more before you drive off.

Oct 06, 2014 | Cars & Trucks

2 Answers

How to adjust handbrake on2001 mondeo


General advice:All handbrakes rise adjust from under the car,very rare behind the handle lever.Worning:Handbrake adjustment need to balance so u need to know if each back wheel brakes even,in order to see that u may have to jack the car and count the rising clicks on handbrake lever to see at what point the wheel stops (u must rotate the wheel by hand (and maybe ask for a friend to brake),with quite some force.Inspect also the interior component (in the back drum if apply,if on disc there is no need)Empiric :by driving at low speed on even road and handbrake hard,the marks of each wheel on the road must start +/- at the same point.Warning:This is dangerous manouver,the car may drift,do not steer while braking,if not shure,better take it to a dino test.Tip:if u tune eack whell at the max brake open position,the handbrake balance,and from there u can adjust the hight of the lever rise by loosing or tighten the cable.Hope u deal it.Cheers.

Oct 24, 2013 | Cars & Trucks

2 Answers

My handbrake light keeps flickering on my 1996 vw golf convertible


this could simply be a loose connection on the handbrake switch but this light is also the brake fluid level warning light so it might be a good idea to check the brake fluid level too. also it might be part of the brake pad warning system ane may indicate that the brake pads are nearing replacement it is also required to replace the warning wires with the pads


let me know if this helps

cheers mike

Aug 02, 2012 | Cars & Trucks

2 Answers

Hand brake light staying on


Either the sensor is bad or the handle is not full down.

Nov 13, 2009 | 2006 Mini Cooper

4 Answers

Handbrake warnjng light comes on when driving


The switch that detects when the handbrake is pulled is either loose and jiggling around or the handbrake cable is loose and allowing it to move enough to hit that switch. That's not safe, you need to have it looked at.

Sep 17, 2009 | 2002 Ford Escort

1 Answer

When start car ,hand brake down , light on


the brake warning light operates on / off with handbrake operation but also is linked to the brake fluid level sensor on reservoir cap so check fluid level/top up and make sure no fluid leaks?? level drops due to displacement due to brake pads wear so check pads? renew if low other than this check the handbrake switch has not broken or gone faulty ?

Apr 30, 2009 | 2005 Hyundai Elantra

1 Answer

Hand break light illuminated on dash


if your braking system is ok and its only the handbrake warning light that is on then it sounds like a stuck switch not sure were it is on your car but it should be near to the bottom of the hand brake it is a type of push switch i.e. handbrake in the on position switch will come out relase the handbrake and it will push the switch back in.

hope this helps

Apr 22, 2009 | 1999 Volkswagen Jetta

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...