Question about Cars & Trucks

Open Question

CYL HEAD TORQUE RENAULT KERAX TRUCK 400 - Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Angle Torque settings head bolts

Use new bolts, tighten in the following stages 1. 20Nm 2. 100Nm 3. wait 3 mins 4. slacken bolts 1&2 retighten to 20Nm +110 degrees 5. carry out stage 4 for bolts 3,4,5 & 6 then bolts 7,8,9 &10 Sequence, 8 4 1 5 9 7 3 2 6 10 Bolts 9 & 10 are flywheel side of the engine.

Posted on Mar 17, 2009

polarcycle
  • 1392 Answers

SOURCE: head bolt torque spec

Always use new head bolts.
1)tighten to 40ft/lbs
2)back off 1/2 turn
3)tighten back to 40ft/lbs
4)tighten an additional 90 degrees
5)tighten an additional 90 degrees.

Posted on Aug 16, 2009

ghost45
  • 1280 Answers

SOURCE: how much to torque 2003 nissan altime head - Sequence

Buy the service manual (or the Chilton's Manual at AUTO ZONE, PEP BOYS, O'RIELLY'S, CAR QUEST, etc.).

Posted on Sep 10, 2009

  • 280 Answers

SOURCE: cyl head torque renault clio 1.4 1998

Its very very complicated - Ach! the french!!! ---- Stage 1 torque to 20nm ----------- Stage 2 - wait 3 minutes.---------- Stage 3 - fully slacken all bolts in sequence------- Stage 4 - torque to 20nm-------- Stage 5 - tighten by 97 degrees (plus or minus 2 degrees - so 95-99 degrees really)--------
Tightening sequence, with the flywheel on the right looking down on engine - top row of bolts are 1,2,3,4,5 -------- bottom row of bolts are 6,7,8,9,10 --------- sequence is, 8,3,4,9,7,2,5,10,6,1----

Posted on Jan 26, 2010

BCAS1298
  • 3092 Answers

SOURCE: I AM DOING THE HEAD GASKET ON 1999 SAAB 95 4 CYL I

Torque spec

Step 1- 44 Ft.Lbs.
Step 2- 59 Ft.Lbs.
Step 3- Tighten bolts an additional 90 degrees.

Here the head bolt's tightening sequence.

bcas1298_1.gif

Posted on Nov 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the tappet clearance and torque setting for hyundai atos 1.1 2007


valve clearance is inlet .02mm hot. exhaust .025 mm hot cyl head torque is cyl head torque stage1 30-35nm stage2 60-70nm stage3 run engine for 15 minutes. stage 4 tighten further 70-75 nm

Dec 15, 2016 | 2007 Hyundai Atos 1.1

1 Answer

Torque settings for head gasket on LDV convoy 400 2,5ltr ford engine


I can tell you one thing for sure these are torque to yield bolts and they must be replaced, you can't use them over or the head gasket will leak very quickly or the bolt will snap on install..

Jul 13, 2012 | Cars & Trucks

1 Answer

Eng brake inop


pleas i have a problem in my renult kerax 420 its (eng break inop) whats a sulushn plese

May 02, 2012 | Renault Cars & Trucks

1 Answer

I AM DOING THE HEAD GASKET ON 1999 SAAB 95 4 CYL I NEED THE TORQUE SPEC ON CYL. HEAD


Torque spec

Step 1- 44 Ft.Lbs.
Step 2- 59 Ft.Lbs.
Step 3- Tighten bolts an additional 90 degrees.

Here the head bolt's tightening sequence.

bcas1298_1.gif

Nov 11, 2010 | Saab 9 5 Cars & Trucks

1 Answer

Cyl head torque renault clio 1.4 1998


Its very very complicated - Ach! the french!!! ---- Stage 1 torque to 20nm ----------- Stage 2 - wait 3 minutes.---------- Stage 3 - fully slacken all bolts in sequence------- Stage 4 - torque to 20nm-------- Stage 5 - tighten by 97 degrees (plus or minus 2 degrees - so 95-99 degrees really)--------
Tightening sequence, with the flywheel on the right looking down on engine - top row of bolts are 1,2,3,4,5 -------- bottom row of bolts are 6,7,8,9,10 --------- sequence is, 8,3,4,9,7,2,5,10,6,1----

Dec 08, 2009 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

Torque settings for renault megane engine


Does anyone know the torque settings for the following Cam box(bolts), head bolts & crank shaft, the megane scenic is 2001.

May 01, 2009 | Renault Sportwagon Cars & Trucks

2 Answers

Angle Torque settings head bolts


Use new bolts, tighten in the following stages 1. 20Nm 2. 100Nm 3. wait 3 mins 4. slacken bolts 1&2 retighten to 20Nm +110 degrees 5. carry out stage 4 for bolts 3,4,5 & 6 then bolts 7,8,9 &10 Sequence, 8 4 1 5 9 7 3 2 6 10 Bolts 9 & 10 are flywheel side of the engine.

Jan 28, 2009 | 2000 Renault Sportwagon

1 Answer

Renault 5 GTL


How much mechanical ability do you have? Replacing the head gasket on a 5 is not an easy job, and if you have water in the oil, you prob have compromised the main & rod bearings. Water & oil on the bearings makes them wear out rapidly. Plus, if you take the head off (don't pull it UP, leave a corner bolt in loose and PIVOT the head on the dowell pin, that way you will not pull up the liners), if you don't, you will unseat the piston liner seals, then you have a whole new problem to deal with. If you really want to do this, you need to remove the cyl head, and then take it to a machine shop to check the straightness of the head mating surface, and possibly the block. Then hope that the liner seals are not compromised when you put it all back together...
Overheating Renault engines is unfortunatly quite expensive.
Sorry, I do not have the torques specs.

Sep 11, 2008 | Renault R5 Cars & Trucks

3 Answers

Hi I'm looking for cylinder head torque settings for a 1992 BMW 316/318 e36


BMW cylinder torque setting all models

According to my service manual as follows.

Cyl head to engine block (torx e12 M10 bolts)

Stage 1 30nm (22 ft – lb)
Stage 2 + 90 degrees
Stage 3 + 90 degrees

Cyl head to lower timing chain cover 10nm (89in – lb)

The tightening sequence is from inside to outside crossover as normal. Loosening sequence is from outside to inside crossover. Remember to set torque wrench at low setting and work gradually up through the whole sequence until you get the desired torque.

Jun 16, 2008 | 1992 BMW 3 Series

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...