Question about Cars & Trucks
Peugeot partner 170C 1.9D year 1999 maxi fuse box diagram. With the 80amp maxi fuse connected and startkey removed the battery went empty within one or two days. When I place a 12v lamp between minus pole of the battery and minus cable the light lights up. The lamp goes out, if I remove the 80amp fuse. With this fuse removed, I can start the engine without any problem. Do you have the fuse/wiring diagram for the maxi fuses, or any idea what can be the cause. with kind Regards.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you know the fan works with direct battery voltage and you have no voltage at the fuse block then you have a problem at the fuse block. You need to remove it and check for corrosion or a short. This could also have something to do with your radio and buzzer. Pull the fuse for the radio and remove the buzzer and then check to see if your test lamp lights across the 25 amp fuse opening for the blower.
Also with fuse in place check for voltage at the yellow/brown wire going into the blower motor switch. Just cover all your bases before going at removing the fuse block.
Posted on Nov 15, 2008
The wiring diagram I found shows it on the same fuse as the clock and cigarette lighter.Not sure if that right as they show the Spetrum and storm as having the same wiring.But if thats not the one,yes somewhere there should be a fuse.If you find it blown replace it,if it blows again you're going to have tofind where the short is.
Posted on May 15, 2009
Fog lamps are installed on the front bumper. The switch is located
to the left of the steering column on the dash panel. The fog lamps are
turned off by the circuit relay when the high beam driving lamps are
turned on. The circuit relay is located on the right front wheelhouse
panel near the blower motor.
Good luck, and remember rated this help.
Removal & InstallationFog Lamp Element
See Figure 1
Fig. 1: Exploded view of a fog lamp assembly
DO NOT handle elements with your bare hands, always handle with a clean cloth. Oil from your hands will cause the element to fail.
Fog Lamp Switch
The fog lamp switch is removed and installed by simply prying the switch from the instrument panel and unplugging the electrical connector.
FOGLAMP BEAM ADJUSTMENT
1995 Cherokee Chassis Schematic
Posted on Aug 11, 2009
Take a voltmeter.
remove the connection pin of alternator and check the voltage while engine runs. If in idle running its below 12 volts then there is a short circuit within alternator coil. Replace your alternator.
May be my suggestion can help you.
Posted on Jan 10, 2010
Tips for a great answer:
May 12, 2016 | Peugeot Cars & Trucks
Jan 12, 2015 | Peugeot 206 Cars & Trucks
Jul 04, 2014 | 1991 Peugeot 405
Jul 01, 2014 | 2010 Peugeot Partner Grand
Jan 20, 2014 | Cars & Trucks
Dec 12, 2013 | 1999 Saturn SL
Sep 16, 2013 | 1999 Peugeot 206
Feb 20, 2013 | Cars & Trucks
Nov 30, 2012 | 1991 Peugeot 405
Nov 04, 2012 | Peugeot Cars & Trucks
179 people viewed this question
Usually answered in minutes!