Question about Cars & Trucks

Open Question

Where is the engine number of 2006 LAND ROVER LR3 located

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: Land Rover LR3 versus Jeep Grand Cherokee -- which is overall a better car??

I used to a own jeep grand cherokee but sold it for an LR3. From experience the jeep is somewhat economical over the lr3 in term mpg. Seating in the jeep is a joke, not enough leg room or head room or comfort from daily driving for 3 years. Most of the jeep dashboard is plastic which is essentially price reducing overall to the cost of the car. In terms of the LR3, you have lots of driver and passenger comfort, more suspension features, more capability, however, buttons for certain things are hard to find and need time to remember. Next, LR3's tires need to be replaced once every year, at least since i off-road 4times a month, not much but yea.

Overall the jeep is cheaper and more economical to drive with less comfort. The LR3 is the exact opposite, its more comfortable, more capable on/off road, more better looking, however, it consumes lots and lots of fuel, maintenance can be lot at 30 or 60k. let me put it this way, a jeep grand cherokee is like a bicycle and an LR3 is like a sports bike.

Posted on Jun 27, 2008

  • 333 Answers

SOURCE: How do I change Rear Breaks on 2006 LR3 Land

Brake Pads

Service Repair No - 70.40.03


Removal

  1. WARNING: Brake pads must be renewed in axle sets only, otherwise braking efficiency may be impaired. WARNING: If the brake pad wear warning light has been activated, the pad wear sensor must be replaced. CAUTION:To avoid accidental operation of the Electric Parking Brake (EPB) andpossible damage to the EPB actuator, remove Fusible link 8, located inthe engine compartment fuse box before commencing work. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. Raise and support the vehicle.
  2. Remove the wheel and tire.
  3. CAUTION: The brake pad wear indicator sensor is easilydamaged. Do not use a lever to remove the sensor. Use fingers only. RHside only: Disconnect the brake pad wear indicator sensor.
  4. Remove the brake caliper lower bolt.
  5. Remove the brake pads.
Installation

WARNING: Do not use compressed air to clean brake components. Dust from friction materials can be harmful if inhaled.

Clean the caliper housing and anchor plate using brake cleaning fluid.
  1. Inspect the caliper piston and slide pin seals for damage.
  2. Position a bleed jar containing a small quantity of approved brake fluid. Connect the bleed tube to the bleed screw and loosen the screw.
  3. Press the piston into the caliper housing.
    • Tighten the bleed screw to 14 Nm (10 ft. lbs.) .
  1. Disconnect the bleed tube and remove the jar.
  2. Install the brake pads.
    • Install the 2 clips.
  1. Rotate the brake caliper downwards.
    • Tighten the bolt to 35 Nm (26 ft. lbs.) .
  1. Connect the brake pad wear indicator sensor.
  2. Repeat the above procedure for the other side.
  3. Install the wheels and tires.
    • Tighten the wheel nuts to 140 Nm (103 ft. lbs.) .
  1. Depress the brake pedal several times, check the fluid level in the brake fluid reservoir and top up with brake fluid if necessary.

Posted on Sep 10, 2009

  • 51 Answers

SOURCE: 2005 LAND ROVER LR3 FUEL GAUGE WORKS SOMETIMES HAS

There is a service bulletin for replacement of both fuel sending units in the fuel tank. i have done many of these, 99% of the time it;s the problem.

Posted on Oct 07, 2009

  • 12 Answers

SOURCE: How to install lower control arm bushings on a

good luck

Posted on Oct 14, 2009

  • 10865 Answers

SOURCE: how to program a fob for land rover lr3 2005

This link may be of help to you

http://www.keylessride.com/keyfob.asp

Posted on Oct 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2006 Land Rover LR3, the vehicle was left in the on position all night, came out this morning and battery was dead. Jumped the battery and receiving an error message stating "Engine System F


Possibly your engine management computer will need to be reset. If the battery was dead dead, meaning the voltage was down to under 11 volts or so, there is a good chance the computer lost the information it needs to manage the basic engine functions such as throttle settings, fuel management, etc. You might want to also pose this question in one of the Land Rover forums to see if anyone else has a solution, but I would guess it's service time.

Aug 25, 2014 | 2006 Land Rover LR3

1 Answer

Where is air mass sensor on 2005 land rover lr3


I believe you will find the MAF sensor in similar locations on your LR3 as with P38. In the intake tube between your air filter and the engine there will be a section that has a multi-long-running to it. This middle section of the air intake houses your MAF sensor. This is a fairly fragile component, use care in handling, do not touch the wire or mesh and clean only as specifically instructed on the label of the product formulated specifically for cleaning it.

Jan 05, 2014 | 2006 Land Rover Range Rover Sport

1 Answer

Should i buy a 2006 land rover lr3 se with 140000 miles


Life car is about 225000 km.You have 224000 km.Think about.

Mar 16, 2013 | 2006 Land Rover LR3

1 Answer

How to change the battery on a 2006 Land Rover LR3 remote


most plases that sell watches and stuf should be abel to chang it for you

Jan 17, 2013 | 2006 Land Rover LR3

2 Answers

I have a 2005 land rover lr3 and my key battery is dead


if the battery can be replaced you need to replace it, if it can't be replaced you will have to buy a new key from a land rover dealer.....hope this helps.......cheers.

Sep 08, 2011 | 2006 Land Rover LR3

1 Answer

The engine ship came on?land rover LR3 / 2006


That little ship means you are low on coolant, check the overflow bottle for the antifreeze.

Nov 04, 2010 | 2006 Land Rover LR3

1 Answer

My aux inport won't work on 2006 Land Rover LR3. Would this be something effected by a bad fuse?


No. Radio works off single fuse. Some aux ports have to be enabled by mode/source setting. Check your radio manual on how to turn on aux port.

Aug 23, 2010 | 2006 Land Rover LR3

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...