Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Seat belt repair
first for the switch in window
the window switch is easy to test you just gotta remove switch out of the door leaving it hang there is a way to test with a guaged wire with fuse on it
take the main power wire and touch to the other connectors on the main switch if the window goes down or up the switch is the problem
im suggesting this way first with fuse cause its easier then testing the windows motor inside the door frame the switches should just pop out of the panel with out haveing to take panel off
now the seat belts there are 2 style that are common to chevy
one is inside the molding of the drivers panel you gotta pop off the panels easily and gently to get at the seat belt retractor this will be bolted to the metal under the molding
the other style is in the seat which you gotta unbolt the seat under the top half it will need to be unbolted at the bottom top half of seat
when you pull threw the top section of top half of seat remember to tie a string to the end so that when you pull threw top half the string will be there so you can connect too new belt and pull back threw with ease make the string long enough to hang
now the bottom half of seat what i call the "**** seat" you remove the molding at bottom around the belt retractor this will be bolted to floor bolt also pull belt threw molding once molding removed
disconnect any electric wires
now saftey issue involved with seat belt removal is for a reason i dont know of the dealer ship always discharges the belts and air bags once removed i guess because of static electricity becareful when you remove belt and replacing belts cause static elec. can set them off
once your seat belt is removed place in card board box and take to dealer after complition of installing new belt they will discharge your seat belt for you and then you can dispose of it properly
Posted on May 29, 2008
SOURCE: airbag light on
Most dealerships or garages with decent scan tools can find an air bag code if the light is on. The light might not turn itself off even when fixed and would have to be cleared. Also I've seen lights come on if someone has a large audio system installed and is drawing to much power. That is usually just a low voltage code with the system though.
Posted on Jan 28, 2009
my seat belt/airbag light on...daeler told me I need a new drivers side buckle...approx 370 to repair!!!! light was on before they repaired, recall i guess, then 2 weeks later this happend
Posted on Feb 21, 2010
Tips for a great answer:
Sep 10, 2015 | Lexus RX 300 Cars & Trucks
Feb 28, 2011 | 1991 Honda Accord
Jul 09, 2010 | 1994 Toyota Corolla
May 19, 2010 | 1995 Mercury Villager
Jan 18, 2010 | 1991 Honda Accord
Sep 17, 2009 | 1991 Toyota Camry
Oct 01, 2008 | Hyundai Tiburon Cars & Trucks
Jul 31, 2008 | 2002 Mazda Protege
May 21, 2008 | 1999 Dodge Ram 2500 4WD
26 people viewed this question
Usually answered in minutes!