Question about GMC Yukon Denali
On the truck rear left side is leaning down
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Posted on Dec 21, 2008
There's a lever that connects the driver-side rear shock to the Automatic Level Control module (the air compressor and the ride-height sensor). Disconnect the lever from the shock and rotate it up and hold it. The compressor should kick in when you hold in place after a few seconds. If it doesn't kick in, make sure your fuses and relays are good. Otherwise, you may have a failed ALC module/burned out air compressor (from the shocks being shot). After you replace the shocks (and after you recouped from the heart attack you had when you shelled out $500+ for each shock), replace the ALC module/compressor (it's all one unit), and test it - it should kick on when you rotate the lever up again.
Figure about $350 for the ALC module from your dealer, and make sure the part numbers match! Your truck came with an upgraded ALC module from the 2001-2004 module, which were prone to water damage.
Posted on Dec 30, 2008
SOURCE: 02 yukon denali xl wont start
Did you try to replace the starter cable? is the Truck turning over or just clicking.? If it's turning over and not starting. Best guess would be one of two things. Knock sensors Located under intake manifold. they get wet and deteriorate or the fuel pump. I've replaced all three on mine. 233k still running strong...
Posted on May 24, 2009
Hey i found a link for you with step by step pictures and literature on how to fix this problem. Apparently it's a common thing with yukon/tahoes. Web site; http://www.fullsizechevy.com/forums/general-discussion/technical-maintenance/313280-tahoe-rear-air-has-no-heat-just-blowing-cold.html. Good luck, hope i helped.
Posted on Dec 11, 2009
do not replace only the bearing. replace hub assembly. remove rim/tire , remove caliper, mounting plate, rotor. . un bolt hub assembly, unplug abs. remove front axle nut if 4x4. you may need to rent the axle nut remove kit and hub puller. pull out hub. drive axle reward out of hub. install new part. do not torque hub over 90lbs. check with parts sell for spec
Posted on Jan 03, 2010
Tips for a great answer:
Aug 08, 2015 | 2007 GMC Yukon XL Denali
Apr 26, 2015 | 2007 GMC Yukon XL Denali
Jul 09, 2014 | 2007 GMC Yukon Denali
Jul 30, 2010 | 2002 GMC Yukon Denali
Apr 20, 2010 | 2002 GMC Yukon Denali
Aug 05, 2009 | 2006 GMC Yukon Denali
Jul 24, 2009 | 2003 GMC Yukon Denali
May 23, 2009 | 2002 GMC Yukon Denali
Apr 20, 2009 | 2005 GMC Yukon Xl Denali
Nov 18, 2008 | 1999 GMC Yukon Denali
37 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: