Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You have to remove the dash but it is VERY simple to do.
Remove the fuseblock cover on the end of the dash on the passenger's side.
Once removed, remove the screw holding on the end of the dash.
Now, next to the glove box, to the right, remove the one screw on the bottom. Then remove this panel by pulling it out (it will now be held on by two clips at the top.)
Now, looking at the temperature control cover, remove the two screws from the bottom of this. Pull it off. It also is held on by two clips.
Now, below the steering wheel, remove the one screw from this panel (on the right). On the left there is a "plug" holding it in place, Pop out this plug. I think there are a couple of clips now holding this on at the top.
Now that you have all of that pulled out, pop the dash out. At worse, it is held in with clips.
Now that you have this out, there are four screws holding in the instrument panel. Take out these four screws. You will find one electrical cable connected to the cluster. Pop that off of the cluster and you now have the entire instrument cluster in your hands.
I've had to take mine out to figure out why my gear indicator/odomiter would not illuminate (Buick told me it was a light). I can see where this encased LED has a short (black mark). It is soldered onto the board. Looks like I have to purchase a repaired board.
I hope this helps.
Posted on Nov 03, 2008
This Seems Indicative Of a Poor Connection AT The CLUSTER Or A Junction Connecter Close to the Cluster. This is Assuming you Have Ruled OUT ALL ABS COMPONENTS, LOOK at These VERY CLOSLY Because of the Small Volts These Wires Carry , the SMALLEST DEFECT WILL Cause this Type of Symptom that you have given. Please try all of the Above, I feel Confedint that athis is where your Problem Is.
Posted on Jul 16, 2010
There's 9 screws in the plastic piece that surrounds the instrument cluster and the lower knee guard, remove those screws and pull the plastic trim away from the dash, disconnect the switches on the left side as you pull outward. Then there's 4 screws that hold the actual instrument cluster in place, remove those and pull the cluster out, unplug the grey plug in the back of the instrument cluster and your done. You may need to set your parking brake and put your transmission in 1st gear of you have a column shifter model.
For more information on Trailblazer instrument cluster problems visit this page - Trailblazer speedometer fix
Posted on Sep 30, 2010
i have a 1999 ford windstar with 3.0 engine it keeps damaging the instrument cluster( nothing works) it all started when i changed the headlight bulbs to a brighter one , it keeps popping the fuse so i then when to a higher rated fuse, this is when it then burnt the instrument cluster(smoke came out from under the cluster
Posted on Aug 08, 2011
Tips for a great answer:
Oct 14, 2015 | Kia Cars & Trucks
Aug 31, 2015 | Kia Cars & Trucks
Apr 10, 2013 | 2000 Kia Sephia
Sep 23, 2011 | 2001 Kia Rio
Dec 03, 2010 | 2007 Kia Rio 5 Sx M/T Hatchback
Jan 06, 2010 | 2007 Kia Rio 5 Sx M/T Hatchback
Oct 07, 2009 | 2001 Kia Rio
Aug 14, 2009 | Kia Spectra Cars & Trucks
Jul 08, 2009 | 2001 Kia Rio
225 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: