Question about Cars & Trucks

Open Question

How to replace Water Pump on ford ikon rocam engine

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75822 Answers

SOURCE: how to replace water pump on 1992 ford tarus

Water pump diagram of the 3.0 V6
7_8_2012_9_05_16_pm.gif

Posted on Jul 08, 2012

lsteward68
  • 331 Answers

SOURCE: I have intermittant overheating problems with my

Ronnie this soun ds like the thermostat is not opening all the time. this is an easy fix. the part probably cost about 8-15 dollars at autozone, dont forget to get the gasket also.
1-2 dollars. The guy at the counter can show you where it goes

Posted on Jul 05, 2009

  • 5 Answers

SOURCE: i need to refit the v belt on my ford ikon 1,6 rocam please help me out with a diagram

GO TO THIS LINK. At 2min 38 sec. it shows the belt layout http://www.youtube.com/watch?feature=player_embedded&v=nsvDcUG_eo4

Incase you can't here goes. Clock wise. Power steering, altenator, idler pulley, air con, cranck, tensioner, water pump back to power steering. Little space and quite tricky to get belt over all the pulleys without it popping of somewhere. I also have a problem with the belt supplied by spare shops. 6pk2100, its to small. at least on mine.

Posted on Dec 14, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Ford ikon 1.6i lx 2005 modeltorque setting of acylinder head. how to do it.its a rocam engine


You must use new head bolts, these are one time "stretch to yield" bolts
Tighten cylinder head bolts in three stages in the sequence indicated

10--4--2--6--8

7--5--1--3--9

Tighten in the following stages
STAGE 1 ------------20 Nm 14.75 lb
STAGE 2--------------40 Nm 29.51 lb
STAGE 3 Turn head of bolt 90 degrees of rotation.

Aug 11, 2016 | 2005 Ford Ikon 1.6i

2 Answers

Ford ikon 2003 model rocam engin fanbelt broke so I rode like that for about 5km then pulled over I then replaced fanbelt and head gusket got some water in my oil so I drained all the oil put new filter...


youve over heated the engine -and may have cracked the head or warped it -suggest you take to a ford mechanic a.s.a.p -an oil change wont solve the problem ,a new replacement head and new gasket etc.at the worst or may get away with just maching the head if its not cracked then with new gasket you could be lucky -talk to mechanic

May 29, 2014 | Cars & Trucks

1 Answer

I need to refit the v belt on my ford ikon 1,6 rocam please help me out with a diagram


GO TO THIS LINK. At 2min 38 sec. it shows the belt layout http://www.youtube.com/watch?feature=player_embedded&v=nsvDcUG_eo4

Incase you can't here goes. Clock wise. Power steering, altenator, idler pulley, air con, cranck, tensioner, water pump back to power steering. Little space and quite tricky to get belt over all the pulleys without it popping of somewhere. I also have a problem with the belt supplied by spare shops. 6pk2100, its to small. at least on mine.

Dec 14, 2012 | Ford Focus Cars & Trucks

1 Answer

Need diagram of the correct route for ford rocam fan belt on aircon models


i am looking for a fen belt diagram for ford ikon 1.6 2003 recom

Nov 26, 2012 | 2006 Ford Bantam 1.3i

4 Answers

Heyyy..... i bought a 2007 model ford ikon flair 1.3 rocam, 2 weeks ago. Now its giving me heating problem... i have to fill in water daily. Water vanishes very quickly in about 2 days... and the fan...


Sounds like a head gasket to me. if you go thru that much water in two days you should be seeing white smoke out the exhaust system.
Good luck

Nov 10, 2010 | Ford F Cars & Trucks

2 Answers

I have intermittant overheating problems with my 1.6 Ford Ikon which has a Rocam engine. I need the diagram of the cooling unit attached to the side of the engine as I think this is where the problem lies....


Ronnie this soun ds like the thermostat is not opening all the time. this is an easy fix. the part probably cost about 8-15 dollars at autozone, dont forget to get the gasket also.
1-2 dollars. The guy at the counter can show you where it goes

Jul 05, 2009 | Ford Focus Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

432 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...