Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
there is a linkage rod held by plastic clips that runs from the door handle to the door latch, it has come off, u must detrim the door to replace it.
Posted on Dec 16, 2008
Remedy is a new inside door latch. These used to be only available thru Chevy but today NAPA has them too - pricey but what can be done about that? Inside door liner pops off with several plastic rivets designed to release with moderate pressure, a screwdriver helps but can also lead to broken rivets which are almost sure to happen with the gentlest touch anyway. Sometimes there are screws to remove around the armrest area, check from below. There will be a sheet of plastic that needs to be pulled out of the way, do it any way that can be reversed when the time comes for that. Then you'll need to drill out the rivet that holds on the old door latch and drill out that hole in the door and the hole in the new latch to use a small bolt. You'll also need to buy a proper sized bolt. The door latch slides into position in the door proper after the rivet is removed to allow movement of the entire door latch.
Then undo the links. Operational link attachments are tricky but you first swivel them out away from the rod which allows the 90 degree bend in the rod to be removed from the door latch proper.
Step by step not applicable, it's a learn as you go experiance. Different jobs and models have their unique pitfalls, sorry no free pass around those. Do pay attention to you own level of expertise here and hire it done if you don't feel that you can do it after the above discription of the process.
Later on you will need to replace the door latch proper as they are next on the list to fail. This is a slightly more difficult job, but both can be accomplished with stamina and a cool temper. These are also available from NAPA. Inside door handles fail because they are made from pot metal (zinc) which is way too soft but CHEAP. Latches fail mainly due to mis-alignment of doors that hammer out the metal part of the latch. Use a 6 foot 2by4 or other stronger lever and blocks with 2 or three friends to bend the door up so that it closes in alignment with the body if you want to prevent buying a door latch on down the road. Driving with the door open hastens this condition so don't do it.
Posted on Jun 25, 2009
unless you are mechanically inclinde don't mess with it get someoen you love and adore to do it for you, you can break the tabs that hold the door on and it can get expensive the worst part is it might not open at all if you don't understand how to operate it unless you have one of the experts here helping you with it step by step, but could take as much as 4 hours depending on your ability to work with your hands. Some people just don't need to own wrenchs they are a danger to themselves and the public at large, not saying they are not smart but just don't have the know how and motor skills. I am telling you this so you won't have a headache on your hands.
Posted on Jun 26, 2009
Go to http://www.hmaservice.com/ and register (vehicle by VIN). Afterward, you'll have access to technical information (manuals, wiring diagrams, service bulletins, etc) about your vehicle.
Posted on Jul 18, 2009
Tips for a great answer:
Sep 15, 2016 | 1999 Oldsmobile Aurora
Oct 16, 2012 | 1999 Land Rover Range Rover
Oct 29, 2011 | 1999 Oldsmobile Aurora
Oct 18, 2011 | 2001 Oldsmobile Aurora
Jul 31, 2011 | 1999 Oldsmobile Aurora
Jun 20, 2011 | 1999 Oldsmobile Aurora
Feb 04, 2010 | Oldsmobile Aurora Cars & Trucks
Jun 18, 2009 | 1998 Land Rover Range Rover
Jun 16, 2009 | 1999 Volkswagen Passat
Mar 25, 2009 | 1999 Volkswagen Passat
Aug 22, 2017 | Cars & Trucks
29 people viewed this question
Usually answered in minutes!