Question about Cars & Trucks

Open Question

Mazda bongo auto

My gear box losing oil checked another bongo looks like some sort of rubber bung missing on bottom of gearbox only losing oil when driven

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

bunnydawg
  • 5158 Answers

SOURCE: gearbox oil

there is a pan at the bottom of the transmission that you can drain the fluid from.... you'll need to get a new gasket and it's a good idea to change the filter at the same time. usually you can buy that in a kit that includes both... most automatics don't have a drain hole. but be aware that you have to make sure that that is the correct transmission fluid for the tranny.
also realize that draining the pan and changing the filter is good maintenance but there is still a large amount of flud in the torque converter and transmission cooler.

I'm not sure how advisable it would be to mix the two types of fluid

changing the filter might be a better option... also when you do that there is a small magnet in the pan ... it catches any small metalic flakes as the bands wear.
and while you have the pan off you can adjust the bands... you'll need a manual to make suire that is done properly... that is if that transmission requires adjustment.... as far as i know the new electronic transmissions don't need to be adjusted.


Robert

Posted on Dec 18, 2008

alicantecoli
  • 22114 Answers

SOURCE: what bung do I need to remove to change gear box oil

their isnt one you have to slacken the sump bolts to drain the oil.Also why are you changing the oil has it been contaminated??if its not dirty with water from a flood or something then do not touch and stop listening to part time weekend bar room know it all know nothing so called mechanics.automatic gearboxes only use the oil to work the torque converter and fill the pistons up to operate the epyicyclic gears ,whilst its working ok do not touch,and as for a haynes handbook look carefully and see if the writers are members of the institute of road transport engineers, ??? They wasnt last time i looked at one and threw it in the boot of the car after some clever ******** of a customer was trying to tell me my job with his blue anorak on and his mr inteligent glasses.Didnt do 6 yrs college to have some nerd try telling me how to fix a poxy volvo

Posted on Jan 23, 2009

  • 840 Answers

SOURCE: which bung do I remove to change gear box oil

Claire it should be in the engine compartment and it is usually a yellow dipstick and dont forget to check you must let your engine run zas you check the level

Posted on Jan 24, 2009

darkoh69
  • 77 Answers

SOURCE: auto transmition wont go into 3rd and 4th gear

I had the same problem I changed the transmission fluid & put a new filter in the trans, this fixed it good until I put my foot down to overtake the trans kicked down to 2nd gear & the hold light started flashing again & the trans started slipping again. I stressed over it for a day or 2 & then I took it out for a drive & thrashed it, Low & behold it came right. When you change fluid its impossible to get all the old fluid out because the torque converter holds a liter or two under pressure, so when I put my foot down some of the gunk blew through & blocked the pump it looses pressure & cant change gear. You need to get it flushed by a transmission specialist   

Posted on May 11, 2009

  • 1 Answer

SOURCE: hi in need of a wiring diagram fuse box Mazda bongo

look here: http://www.bongoforum.co.uk/forum/Blah.pl?

Posted on Dec 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Skoda gear selector assembly manual gearbox 1998 felicia please show design and possible solution to oil leak from gear box end


Normally there is a seal of sorts here (it may be a felt seal or a rubber flap) but I find that if there is a problem here I check firstly the oil level in the gear box and the viscosity of the oil in the box Remove the filler plug (plug in the side of the box ) and drain until oil is level with the bottom of the threads. Best replace oil with a known viscosity oil for you gear box.

Apr 01, 2013 | Skoda Cars & Trucks

1 Answer

Noise going into 4th gear what could it be


The gearbox could be low on oil check the oil level depending on the modal there should be a bung on the side of the gearbox at the level the oil should be. If you can't detect oil below the bung you need to add oil. Cheers

Jun 19, 2012 | Cars & Trucks

1 Answer

Audi A4 Avant 1.9 TDI Auto, Gearbox does not change until rpm reaches 3000 rpm and does not seem to go into 4th gear , cannot seem to find a dipstic to check the level of Atf oil


their isnt one and only the dealer can top them up with a special tool .if this is a 1996 then it does have a dipstick as it was about this time they changed ,their is a rubber bung on intermediate models fill to teh top here but if no bung then its a sp?cial tool to fill from below .

Aug 22, 2011 | 1996 Audi A4

1 Answer

I dont know where to put the transmission fluid on my mazda 323 1995 model manual transmission please help.


should be a level bung half way up gear box on left or right hand side
you remove bung and fill to that level gear oil goes into manual gearbox

Feb 12, 2011 | 1994 Mazda 323

1 Answer

Renault 2.2 Safrane executive M reg auto gearbox running in safety mode, could this be an oil level fault ?


for topping up the transmission at the front of the gearbox there will be a rubber bung pull that out and top up with atf fluid, if topping up don't work then there could be a electrical fault check all wiring to gearbox for corosion

Feb 23, 2010 | 2006 Renault Le Car

1 Answer

WHERE IS THE FILLER PLUG ON THE GEARBOX ON A 1998 PASSAT TDI PLEASE


Hi,

Just checking.... it is a manual gearbox?

You may need a special tool for the drain plug and a 17mm allen key for the filler (some use the special drain tool for the filler as well)

The drain plug is located under the diff housing.

The filler plug is located on the left (nearside) off the gearbox (look to the left of the hole and you can see the 17mm hex filler bung).

Check you can undo the filler bung, then drain the gearbox oil.

Refit drain bung and fill gearbox through filler/level ********* until gearbox oil is up to the level of the filler bung.

Refit, test drive, check for leaks and retest level again when cold.

Cheers,

"If this has helped you in any way, please rate this solution" :-)

Jan 27, 2010 | 1998 Volkswagen Passat

3 Answers

I cant seem to find where to top up the gearbox oil on my 83 land cruiser


I dont believe thatford ********, ---get under the cruiser half way along the gear box on the left hand side you will find a bung plug 1/2way up the gearbox that is your filler and oil just dribbleing out that hole is the level.----at the back of the gearbox but attatghed to it is the transfer case this is made of aluminium,at the back of this slight y to the left about 1/2 way up is another bung that is the filler for the transfer case and also the level ,NOW LISTEN GOOD if you havea hose conecting the gearbox ******** to the transfer ******** thats good it just means the previos owner ,.or one of them had their head screwed on . W hat happens is this, strange as it seems the transfer case oil gets forced up into the gearbox,with the end result that the gearbox gets over full and the transfer gets low on oil,what we have been doing for many years is putting a bypass hose between the two fillers and as the oil gets forced up into the gear box it gravity feeds back down into the transfer case,,,so if you cant find the bungs but you have that hose you now know what it is all about, -------please let me know if that solves your problem, I know I am right but it is nice to be told

Sep 08, 2009 | 1983 Toyota Land Cruiser

3 Answers

Where is the manual transmission dipstick on 1993 mazda Mx6


manual gear boxes do not have a dipstick , there is a bung plug on the side of the box , about 1/2 way up. to check oil level,umdo that bung plug the oil level is the bottom of that hole.when at correct level oil will just drip over the lip.

Aug 16, 2009 | 1993 Mazda MX-6

1 Answer

Auto transmition wont go into 3rd and 4th gear


I had the same problem I changed the transmission fluid & put a new filter in the trans, this fixed it good until I put my foot down to overtake the trans kicked down to 2nd gear & the hold light started flashing again & the trans started slipping again. I stressed over it for a day or 2 & then I took it out for a drive & thrashed it, Low & behold it came right. When you change fluid its impossible to get all the old fluid out because the torque converter holds a liter or two under pressure, so when I put my foot down some of the gunk blew through & blocked the pump it looses pressure & cant change gear. You need to get it flushed by a transmission specialist   

Apr 23, 2009 | 1996 Mazda MX-6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...