Question about 2001 Chevrolet Cavalier
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
i actually just did this a couple days ago, this takes about 20 minutes and a little bit of patience. When you pop your hood you will see a protective piece of plastic over the headlights/radiator, you firstly have to remove the plastic clips holding that piece then pull that piece of plastic off, once done u will see 2 bolts holding each headlight in place, i believe it is a 9/16 socket but if not just find the one that fits, remove the 4 bolts (2 for each headlight) and pull the headlight in an up and outwards manor. if you feel any resistance do not yank look at why it is catching and clear it, then it should just pop out (the headlight and the corner piece and clipped together so dont pull it too far out) then when the bulb is accessible pull the old bulb, put the new bulb in and voila place the headlight back into position, redo the 4 bolts holding the headlights and re-attach the plastic headlight/radiator cover. Enjoy the new lights
Posted on Dec 24, 2008
Check out this link... better than a diagram, a photo.
note: on my screen this guy's "purple" circle looks more like a light blue, maybe lavender.
Posted on Jun 27, 2009
Stick with me on this
1.Put the car on jack stands
2.Remove the exhuast manifold, Do not rotate the flex cuopling more then 4 degrees od damage will occur.
3.Diconnect the coolant inlet pipe from the water pump outlet hose, Disconnect from the engine, disconnect it from the thermostate housing and remove it.
4.lower the car back down of the jack stands.
5.Detach the brack booster hose.
6.Remove the timing chain cover and the tensioner.
7.Remove the heater outletpiper from the water pump.
8.Remove the water pump cover bolts.
9.Remove the water pump retianer nuts.
Remove the old gasket and clean.
10.On bench. Install the waterpump and cover but lreave the bolts finger tight.
11.Install back in car, leave water pump bolts looseto allow for positioning.
12.Install water pump cover to engine, tighten by hand.
13.Lubricate oringand install metal outlet pipe back into pump, hand tighten.
14a.Tighten the water pump to timing chain nuts
14b.Tighten the water pump cover to water pump housing bolts.
14c.Tighten water pump cover to engine block bolts.
14d.Tighten the radiator outlet pipe to water pump.
15.Install timing chain tensioner.
16.Install exhuast manifold.
17.Install exhuast pipe.
18. Fill it up and bleed the system.
Posted on Jul 08, 2009
1996 Chevrolet Cavalier 2.2L SFI OHV 4cyl
This is a sample for an 1996 2.2L (VIN 4) engine schematic...
You can find more details and the Repair Guide about your model in autozone.com (free register). Select the Year, Make, Model and Engine for access.
I hope help you with this (remember rated this help) Good luck.
Posted on Oct 14, 2009
Tips for a great answer:
Jun 30, 2015 | 2001 Chevrolet Cavalier
Jan 25, 2012 | 2001 Chevrolet Cavalier
Apr 30, 2011 | 2001 Chevrolet Cavalier
Apr 16, 2011 | 2001 Chevrolet Cavalier
Feb 13, 2011 | 2001 Chevrolet Cavalier
May 22, 2010 | 2001 Chevrolet Cavalier
Dec 27, 2009 | 2001 Chevrolet Cavalier
Oct 14, 2009 | 1996 Chevrolet Cavalier
Mar 21, 2009 | 2001 Chevrolet Cavalier
130 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: