Question about 2001 Dodge Ram 1500 Truck 2WD
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: durango cuts off while driving
hi, sounds to me that either the fuel pump is going out or the fuel pump relay is acting up. the cheapest way to check the relay first by simply swaping the relay with another relay in the power distribution box under the hood (swap it with the A/C relay)
Posted on Mar 27, 2009
SOURCE: trucks shuts off while driving
I have a 2000 dodge ram. I had the same problem the truck would just stall no matter how fast or slow i was going. It ended up being the crankshaft position sensor. You need to check for codes to find the problem. p0385-p0389 is the crank shaft sensor. It takes about 5 min. to change if thats the problem. On that year you might be able to turn the key to the on position but not starting then off, then on, then off, then on (three times) on the third time leave on and watch the odometer it will flash codes then will say p-done.
Posted on Jul 07, 2009
it so hard for me to say but the coil pack maybe the thing all the plug wires go to
Posted on Aug 15, 2009
Testimonial: "Thanks!!! I believe I'll start with that first."
Its the electronic shift control located just under the battery ontop the transmission replace or repair will solve the issue
it'll go into drive but once it reaches 1500 rpm it'll drop into neutral as a safety because at this rpm it is being told to shift gear and when it fails to do so it safely goes into neutral
it will go into reverse just fine and park and you can run all the low drive gears until you reach 1500 rpm then it'll cut it off
i pulled mine out re soldered bad components on the board to fix it but im an electronics engineer it may be easier for you to just replace it
Posted on Aug 23, 2009
Testimonial: "I will try this as you suggested. Thanks for all your help."
Tips for a great answer:
Mar 07, 2015 | 1992 Honda Accord
Apr 07, 2011 | 1989 Mitsubishi Galant
Jul 13, 2010 | 2004 Dodge Ram 1500
Mar 27, 2009 | 1999 Dodge Durango
Mar 19, 2009 | 2000 Dodge Durango
Jan 25, 2009 | 1996 Jeep Grand Cherokee
Nov 25, 2008 | 1998 Mercury Mountaineer
Oct 04, 2008 | 1995 Volkswagen GTI
Jan 23, 2016 | 2001 Dodge Ram 1500 Truck 2WD
67 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: