2004 Pontiac Grand Am Logo

Related Topics:

A
Anonymous Posted on Jul 25, 2013

Abs code 1232 accelerator sensor stuck

04 pont grand am abs code 1232,acelerator speed sensor stuck

3 Related Answers

Jonah Oneal

  • 14092 Answers
  • Posted on Mar 23, 2009

SOURCE: Wheel Speed Sensor on a 99 Grand Prix

i use a scanner to check to see all wheel sensors.getting a signal . it take two people. your scanner have to be type to check abs system. you can use ohms meter . it will tell you your wheel sensor is open or shorted out.

Ad

Anonymous

  • 231 Answers
  • Posted on Sep 19, 2011

SOURCE: 94 Grand Prix ABS issue.

Speed sensors commonly go bad and need to be replaced. If you replace the bad sensor it should solve your problem. I hope this helps and if you have any other questions please feel free to ask.

Anonymous

  • 645 Answers
  • Posted on Dec 20, 2012

SOURCE: how to fix Left front wheel sensor C0035 ABS Speed on 2001 pontiac grand prix

Turn the key one click while jiggling the steering wheel.----------------------------------------------------------------------------
galletto 1260

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

2008 ford escape when the abs light is on i have no brakes what can fix this

You need a mechanic with a high level scan tool to check the Diagnostic Trouble Codes and Live Data. It is probably ABS Sensor related, but should never leave you with no brakes..
0helpful
1answer

I have a 2006 jeep liberty. My speed control continues to accelerate, beyond set speed. What sensor, transmission or wheel sensor, provides the PCM with the actual speed of the vehicle?

Normally both rear wheel speed sensors provide the PCM the vehicle speed, via the ABS controller.
But the problem is most likely with the cruise control servo. It has a solenoid for the control, which can be stuck. I would try some WD40 or alike on the servo unit and see if this will free up any stuck component.
0helpful
1answer

2003 toyota highlander 3.0 code C1233. after stop sign make sound when accelerate

Toyota Highlander C1233 OBD-II Diagnostic Chassis (C) Trouble Code Description Toyota Highlander car C1233 OBD-II Trouble Code The ABS module receives wheel speed readings from each wheel speed sensor and processes this information to determine if an ABS event is necessary. The wheel speed sensor detects the magnetic field of Reason For Toyota Highlander C1233 Code The reason of Toyota Highlander C1233 OBD-II Engine Trouble Code is C1233 Left Front Wheel Speed Sensor Input Signal Missing.
0helpful
1answer

TC, ABS and Service brake assist lights are on after changing speed sensor.

make sure your sensor is aligned properly check your connections have you driven the car since you changed sometimes you need to drive the vehicle to reprogram the speed sensor into the abs circuit these are fused circuits check your fuses
0helpful
1answer

Tc, abs and service brake assist lights are on

Could be a wiring problem or the object that triggers the sensor.
0helpful
1answer

How do you reset blinking vsa light

Who did the work? The speed sensor in one of the new hubs could be bad or during the insulation one of the pins got damaged. I would suggest to look at ABS system, scan for any active code/s, take a look at live data and see if a relearn procedure is needed because of the installation of the new hubs. But you will probably find that the fault has to do with an ABS wheel speed sensor. Good luck.
2helpful
1answer

03 pont. G. prix gt. when i pushed the gas pedal down the car does not accelerate the way it should . i recently replaced the fuel injector pressure reg.

could be your coil,or o2 sensor, catalytic convertor clogged with out code its really hard to tell these are just some suggestions
0helpful
1answer

Traction control light comes on and Check engine light when accelerating to highway speed.The performance is not affected most of the time. I did an engine diagnostic, and the only code that flashed...

cleaning the sensor may not have fixed problem --also check connections with abs and speed sensors but recheck code and if still maf possible wiring ir sensor failure
0helpful
2answers

Acceleration problem

check your plug wires that may help.
1helpful
5answers

My abs light and trac off light are both on

Def the wheel bearings/hub/speed sensor. I just bought a new wheel bearing comes with the hub and speed sensor as one. Runs about 80-100 dollars though but abs/traction light went off and stays off now.
Not finding what you are looking for?

52 views

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...