Question about Cars & Trucks
Honda Prelude 1992
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There's no such thing as a timing belt diagram.
Do you mean to say the "Procedure" for changing a timing belt in a 92 Prelude?
By asking such a question I can only interpret it as a clear indication that you've never changed a timing belt before.
If this is true, then you don't want to start out or practice on your own car.
Get the car to a pro and have the job done right.
If not true (and you've changed timing belt's in the past)
Then give me the engine size and I'll post the:
"PROCEDURE" for changing the belt in a few hours.
Posted on Dec 31, 2008
my car did the same thing the problem was a $14 washer inside the oil filter fitting on the car you have to pull the filter conection off (from the car) bit of an *** around but pretty simple.
Posted on Mar 28, 2009
I don't know if you know this but Honda engines turn backwards. Looking at the front of the motor Honda engines turn counter clockwise. All others turn clockwise.
Posted on May 01, 2009
SOURCE: timing belt
BEFORE U TAKE THE TIMING BELT OFF PUT THE CRANK SHAFT ON ITS MARK.IF THE CAM MARKS ARE NOT LINED UP THEN ROTATE THE CRANK 180.THEN U CAN MARK THE POSITION OF THE CAM & CRANK GEARS W/A CRAYON,WHITE OUT ECT.AS LONG AS THE GEARS DO NOT MOVE THEN U WILL BE OK.WITH THE OLD BELT ON U CAN SEE THE TIMING MARKS.
Posted on May 01, 2009
hi i have a diagram of it here and as far as i can see the marks on the twin cams are actually aligned with the top of the cover edge there should be an arrow on each cam pulley, that is pointing upwards, and you should have 2 marks either side horizontal and line up with the cover , the bottom crank pulley has a v cut out which lines up with a mark which is a angled line on the engine cover my picture may be different from your one if you want you can email me i will send you it so you compare it to your one
hope this helps
Posted on Feb 26, 2010
Tips for a great answer:
Jul 28, 2014 | 1992 Honda Prelude
Feb 17, 2013 | 1992 Honda Prelude
Jun 01, 2011 | Honda Prelude Cars & Trucks
May 08, 2011 | 1989 Honda Prelude
Feb 22, 2011 | 1993 Honda Prelude
Oct 20, 2009 | 1993 Honda Prelude
Oct 13, 2009 | 1992 Honda Prelude
May 01, 2009 | 1983 Honda Prelude
Dec 30, 2008 | 1992 Honda Prelude
46 people viewed this question
Usually answered in minutes!