Question about 2009 Hyundai Accent

Open Question

Brake lights replaced bulbs for brake lights that STILL do not work. checked fuse, it is good, brake lights stay on when front lights are on...there is no on and off with peddle for brake light, which just seems to be on full, with headlights on....

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1214 Answers

SOURCE: bulbs keep burning out

When you replace headlights in today's cars, DO NOT TOUCH THE GLASS OF THE BULB!. Handle the bulb only with the packing material the bulb ships in, or with a clean dry cloth.The oils in your skin will cause premature failure of the bulb.

Also, check the sockets (car side) carefully to make sure they are not burned.

Posted on Feb 03, 2009

  • 599 Answers

SOURCE: Elantra J2-1997- ABS and Airbag light on dashboard stays on

this car needs to scanned for computer codes, the scanner must be capable of scanning asian codes,get back to me when you get the codes

Posted on May 14, 2009

ghost4548
  • 776 Answers

SOURCE: Problems with brake lights on my 2000 Jeep Grand Cherokee

YES -- process of elimination. Obviously there's a short circuit in the Brake/Headlight circuits - right? Blown fuse(s) is/are evident of this -- would you agree? Which fuse(s) is/are blowing? An analysis tells you that the only time a fuse blows is when the headlamps are turned on -- correct? Otherwise, brake lights work normally -- right? OK. Head lamps have relays which turn them on. Here's a wiring diagram of the 2000 Hyundai Sonata (NOT the Jeep Grand Cherokee)
7a9e354.jpg a663f53.gif It would appear the problem is with one or more bulbs or sockets or both. As you many notice, there are no connections between the headlamps and brake lamps except the parking lamps (which share the bulbs/sockets)
c7068ec.gif When the headlamps are turned on, so does the tail lamp relay. As you can see, these bulbs/sockets are 'DUAL' filament to ground (series-parallel circuit). Just a guess here - the short is in one of the lower rear brake/parking lamp bulbs/sockets.... just a guess.

Posted on Jun 20, 2009

  • 67 Answers

SOURCE: My 2006 Hyundai Sonata's brake lights are not working

try the brakelight switch, it is right near the pedal above the footpad

Posted on Jul 24, 2009

  • 1071 Answers

SOURCE: my headlights wont turn on everything is good 1996 hyundai accent

the grounds may be bad they are behind headlamps but more than likely it is the switch

Posted on Aug 23, 2009

Testimonial: "thanks i would have never thought to replace it "

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

If the break lights in my 1986 c corvette works but the tail lights do not, what could be the cause


Blown fuse ,bad headlight switch,or wiring issue.
the tail lights have there own fuse and are powered through headlight switch. Do the front running lights come on? If none of them work, switch could be bad if front work and rears dont, check bulbs and power to them when lights are on

Mar 17, 2015 | Cars & Trucks

2 Answers

Replace my brake switch on my 2000 Dodge ram pick up and my brake lights still don't work


Brake switch must be adjusted such that it is depressed with pedal up and released as soon as pedal is slightly depressed.

Feb 26, 2015 | Dodge Cars & Trucks

1 Answer

1 brake light doesn't work... good bulb and fuse


Lights are usually on a dual circuit! Left and right have separate fuses, check all fuses or check the fuse diagram on fuse cover or manual to identify correct fuse!

Dec 28, 2014 | 2001 Dodge Intrepid

1 Answer

I have no signals and when brakes lights are on, lose brake light to either side turn signal is set on


Hi!!

If you activate the turn signal switch and you step on the brake pedal, the turn switch (on the steering column) deactivates the brake light to make the signal light more visible. The bulb for the stop and turn lights is the same.

Turn hazard lights ON. If they don't blink, replace turn/hazard flasher, If one or more lights don't come on, replace bulb.

Check fuse and circuit wiring for broken or loose connections. If all looks fine, check following:

If front turn lights work fine, check brake/turn bulbs.

If turn lights come on but don't blink, replace turn signal/hazard flasher.

If front and back turn lights don't come on, replace switch on column.

Let me know how it worked out, Good Luck

Mar 24, 2010 | 1991 Plymouth Acclaim

1 Answer

Where is the fuse for the right side tail light?


hi if it is only the one bulb not working/tail light and the front light on same side is working along with number plate and other tail lights may i suggest you replace/check the bulb on defective light as if fuse had blown ? the front light on same side would not be working if you put ignition on and press brake your brake light shoul work ? if so change the bulb as the bulb has two elements inside tail light and a higher wattage element for brake light

Feb 25, 2010 | 2004 Honda Accord

2 Answers

Tail lights work on both sides. turn signal and


Sounds like you need to replace the drivers brake/tail light.

Dec 14, 2009 | 1998 GMC Sierra

2 Answers

Brake lights don't work


Check the Pedal switch near the brake pedal.

Sep 01, 2009 | 1989 Ford Escort

1 Answer

2005 chev trailblazer v6 4.2 rear side brake light dont work the top rear brake light works fuse 12 front works rear seat below fuse 16 and fuse 34 good bulbs good where do i check next


CHECK FOR POWER AND GROUND AT THE CIRCUIT BOARD FOR THE AFFECTED BRAKE LIGHT. IF THAT CHECK OUT GOOD THEN CHECK THE BULB CONNECTION FOR BURNED CONNECTORS, THIS IS A COMMON PROBLEM. LOOPING A TEST LIGHT FROM THE POWER TO THE GROUND CONNECTION AND HOLDING THE BRAKE PEDAL DOWN IT SHOULD LIGHT. IF IT DON'T THE CIRCUIT BOARD IS BAD.

May 16, 2009 | 2005 Chevrolet TrailBlazer

1 Answer

Toyota Camery rear light warning light indicator on.


If your sure ALL of your bulbs are good(front and rear)then your bulb check relay is bad its usually in the trunk area,hope it helps have a good dayDB

Feb 16, 2009 | 1997 Toyota Camry

Not finding what you are looking for?
2009 Hyundai Accent Logo

Related Topics:

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...