Question about Ford Galaxy

Open Question

Engine malfunction and stability lights on ford galaxy

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

After starting transmission won't move out of park

It sounds like if this is a car with the brake interlock, meaning the car will not shift from park unless the brake is pressed, there is a malfunction there, some are electronic and it may not be getting power to it especially if there are other warning lights on the dash. It would help if you could give more details, like which lights are on. Most cars with a mechanical interlock will have a cable you can adjust either at the brake cable or at the shifter.

Aug 02, 2016 | 2013 Ford Fiesta

1 Answer

2003 cadillac cts stability control and traction control

Get your system checked for malfunction codes. Sounds like there is water entering the sensor harnesses under the vehicle. Doesn't take much to set off the malfunction light.

Aug 24, 2015 | 2003 Cadillac CTS

1 Answer

How to remove the malfunction light from the dash

If you disassemble the instrument cluster to disable the light, an open circuit is created and the powertrain control module is put into a "limp in" or "service" mode. You maximum engine rpm is reduced. You maximum vehicle speed is reduced to 50 mph and several other systems are disabled (like stability control and traction control). You're better off just having it diagnosed and repaired properly.

Sep 06, 2014 | 2007 Ford Mondeo 2.0

1 Answer

Mini Cooper S Engine Management Light

The following are descriptions from the Mini-Cooper S owner's manual.

Service Engine Soon "?If the warning lamp comes on
either continuously or intermittently, this indicates a malfunction in the emissions-related electronic systems."

EML light: "Engine electronics ?Malfunction in the engine electronics. You can continue to drive with reduced engine output or engine speed."

Triangle circled by an arrow: "Automatic Stability Control plus
Traction (ASC+T)/Dynamic Stability Control (DSC)
?Indicator lamp flashes: System active: drive and braking forces are regulated.
The indicator lamp stays lit: ASC+T/DSC switched off with button or defective. In the event of a defect: please have the system inspected at your MINI Dealer."

First, inspect the belts to make sure none failed at high RPM. If one broke, inspect any cable or hoses in the plane of the belt to see if there was any damage (e. g., a ripped wire in the ASC+T/DSC system). Second, get a readout of the engine error code. (If you get indications of a major vacuum leak including rough idle, look for a blown head gasket.) If you get something else, please post the results in a comment so we can go to the next step.

Jul 09, 2017 | Mini Cooper Cars & Trucks

1 Answer

What does it mean when 1999 Ford Explorer ABS warning light on dashboard comes on?

That means that the EBTCM has detected a problem within the system.The message indicates that a malfunction exists in the stability enhancement feature.

EBTCM (Electronic Brake and Traction Control Module) is an electronic control module that controls and operates the Anti-Lock brake system, Traction Control System and Stability system. If this module detects a problem, it "asks" the cluster to inform you by displaying a warning message.

You should have your car scanned for trouble codes with a scan tool, the Tech2 scan tool is preferred because other scan tools may not communicate with the EBTCM modules.

Hope helps (remember to rate this answer).

Jun 02, 2011 | 1999 Ford Explorer

1 Answer

The VDC light keeps coming on and the check engine light at the same time. what does VDC stand for? I have less power when this light is on. Also are there any good garages to get a service in West Londo?...

VDC is Suburus electronic stability system. You will feel a power loss because the system reacts to driving conditions and if it detects wheel spin it will cut power to your engine. If it is malfunctioning it will cut power at the wrong times. Since your check engine light is coming on too it appears to be malfunctioning. You need to have the trouble codes read by a tech or buy yourself an OBDII scanner for yur car and read them. It should tell you what the problem is so you can fix it.

Apr 08, 2010 | 1999 Subaru Legacy

1 Answer

The VSC light and check engine light came on and will not go out.


Mar 02, 2010 | 2002 Lexus RX 300

1 Answer

Ford Expedition 2000 ABS light on and there is a contineuse sound even the engine off comes from the right side when you are stand in front of the car

Call the dealer with your Vin# and ask about yet another recall for the cruise control. Since the first recall there are electrical problems with indicators and even brake lights malfunctioning.

The continuous sound you hear could be unrelated to the problem. When the A/C stops running there is an amount of time for the Freon to stabilize and the coil is in front of your radiator.

Nov 30, 2009 | 2000 Ford Expedition

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers


Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides