Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
there are two marks one on the cam gear and one on the crank gear. to line these gears up first no#1 cyclinder has to be on commpession stroke, and at top dead center . remove number one spark plug rotate mtr by bumping the starter with key. install commpession gauge hose in number one spark plug hole, when you bump the mtr and that cyclinder is on the compession stroke you will here the air escape from the hose. then rotate the mtr to top dead center by algining the the mark on crank pulley and pointer on the timing cover . cam mark is at 6 a clock postion and the crank mark is at 12 a clock postion. adjust as needed
Posted on Dec 15, 2008
SOURCE: 2005 Chevy Colorado edit
If you put the tail gate down, there is 2 screw (phillips) that holds the tail light in place. Remove them & you can twist the bulb out. Thats it, put back together in reverse. Hope this helps.
Posted on May 28, 2009
there should be a mark on the crankshaft pulley there should be a mark on the camshaft pulley and they should line up but to be sure bring the motor to tdc then line your mark up on your camshaft
Posted on Aug 26, 2009
Tips for a great answer:
Jun 16, 2015 | 2005 Chevrolet Colorado
May 08, 2013 | 2005 Chevrolet Colorado
Jan 25, 2011 | 2005 Chevrolet Colorado
May 03, 2010 | 2005 Chevrolet Colorado
Feb 25, 2009 | 2000 Chevrolet Metro
182 people viewed this question
Usually answered in minutes!