Question about Cars & Trucks

Open Question

Camry power seat: noise when move backward & forward

2007. driver's seat. range not limited. doesn't stick.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75797 Answers

SOURCE: 99 FORD TAURUS driver SEAT RAIL TRACK

U will need to replace the power seat transmission, the gears are most likely stripped out, not uncommon, this part is $800 so i would suggest u try to locate a used one.

Posted on Jan 17, 2009

chrischronic
  • 235 Answers

SOURCE: Power drivers seat does not move forward and backward

if thare is a clicking sound heard then the fuse is not blown so this means ether the seat motor or transmission has gone bad and you half to replace the hole seat track, cause i dont think servisable parts are available for this vehicle

Posted on May 05, 2009

  • 10 Answers

SOURCE: power seat issue

Get out your voltmeter, unplug the connection to the seat's motor, underneath the seat, and hit the switch. if youve got power going to the motor then youll need to replace the motor. If not, it's probably the switch. Also make sure the wires are not cut or damaged somewhere between the switch and the seat.

Posted on Jun 20, 2009

  • 2 Answers

SOURCE: power seat won't move backwards

I had the same problem some one on one of the web-sites solved his problem by banging on the track rail in the front while pushing the seat button back after a good few bangs it unjamed and works great now .I feel like I saved at least $1500 by dealer rates.

Posted on Aug 19, 2010

  • 1 Answer

SOURCE: 2002 camry Driver's side power seat all the way

I found this post area while looking for a way to fix my stuck 2001 Camry LE drivers seat. Sure enough, while engaging the seat motor (it could be heard making an initial clikc), I hit the front rails a coupel time prettysolidly with a rubber mallet. That fixed it!

Thanks to all for providing a quick fand easy way to get the seat moving again!

Posted on Aug 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

In my Toyota Camry 2004 the drivers power seat does not stay fixed in position.It moves forward/backward a llittle (1/2 inch)as the car moves backward/forward. How can I make it rigid in a position?


is it electric or manual... electrick the cog is worn. manual the spring has be come weak either way you will need to take the seat out to fix it.

Feb 19, 2014 | Cars & Trucks

1 Answer

2001 toyota camry drivers seat wont go up nd down


probably the switch-spray with wd40 or electric spray cleaner and wiggle it-if not gotta remove seat completely to check motor,etc

Mar 20, 2013 | 2001 Toyota Camry

1 Answer

2009 impala driver side power seat won't move up/down, makes whirring sound when attempted. Moves forward backward. Passenger seat works properly.


Before you do any of the expensive things disconnect and reconnect the wiring to the seat I had the same exact problem with my 2009 Chevy Impala and was ready to take it to the dealer when I disconnected the power cables to it and reconnected them I found that one of the Harnesses was loose and the problem was solved

Sep 12, 2012 | 2009 Chevrolet Impala

1 Answer

Drivers seat 2000 outback


So here is a diagram of the seat circuitry for your car. Since every other function works except the forward/backward slide function, that leaves basically the forward/backward slide motor, the seat switch, and/or the wiring. If you can verify that the wiring under the seat is in good condition without obstructions, chaffed wires, and/or wires pulled too tight, then it's safe to say it's down to just the motor and/or the switch. Sometimes if the passengers front seat has the same switch, you can plug it in to the drivers' side connector and see what works and what doesn't. If the seat works fine with the other switch, then that's all it needs, if not then it will need a motor. If the other seat doesn't have a switch then you can find them at wrecking yards, or just supply power and ground to the motor in question to see if it works. If it does, then you know you kneed a switch and if not then a motor.
I hope this info helps!~subyguru~
82066173

Nov 14, 2011 | 2000 Subaru Outback

1 Answer

My power driver seat will not move foward but it will go backward


The seat has a transmission to move the seat up, down, foward , & back. Screw jacks adjust the seat up & down. Cables move the seat forward & back. The cable it seems had to break or the end of the cable has rounded out. Possibly the cable rounded out the seat it rides in the transimission housing too. You will need to remove the seat to find out

Oct 02, 2011 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

Power seat won't move backwards


I had the same problem some one on one of the web-sites solved his problem by banging on the track rail in the front while pushing the seat button back after a good few bangs it unjamed and works great now .I feel like I saved at least $1500 by dealer rates.

Jun 15, 2010 | 2003 Toyota Camry

2 Answers

I was sweeping out my car and moved the passenger side front seat to the front. Now it will not move. It will go up and down---but not backwards. The drivers side seat is fine...


Me thinks some how you extended the seat forward to exeed its limit switch. This would mean it is thinking it is back but can't go any more forward. Locate the limit switch, defeat it and get the seat to auto adjust to somewhere in the middle and tighten the switch at the front limit back a bit before it meets its mechanical limit.

Jun 15, 2010 | 2002 Toyota Camry

1 Answer

Power seat will not move


the motor to move it back and forward may have gone out or the switch died

Aug 09, 2009 | 2007 Hyundai Santa Fe Limited

1 Answer

Broken power seat - cannot slide backward. Can I slide it manually?


Ck for debri or other objwcts in way of tracks Does it try to move? If so, there is an obstruction, If not trying or no sound when switch is moved, could very well be a fuse or the forward limit switch is being affected by excess forward travel. Move the switch yo back and without kinda help it. if it's trying.

May 17, 2009 | 1992 Toyota Camry V6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...