Question about Mercedes-Benz Cars & Trucks
Clutch not returning fully.suswpect return spring
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
fill your clutch fluid, it tells you what kind of brake fluid to use on the cap, and then bleed your clutch system as you would your brakes, the bleeder is located on the slave cylinder i believe
Posted on Oct 24, 2008
If no fluid loss,then i would squeeze the fluid line (rubber part) to the slave cylinder. If you now have pressure in the pedal replace the slave cylinder. If still no pressure then change the clutch master cylinder.
Posted on Jul 02, 2009
Buy a seal kit from autozoe, wil cost you around 17 dollars. Remove clutch aster cylinder by firstly undoing the resevoir clamp and remove the reservoir to give you access to the hard hydraulic line and detach the line. Undo the two bolts holding the master cylinder to the firewall and then go inside the car and pull the cotter pin holding the end of the mastrecylinder plunger to the pedal (watch the washers and remember how they go back on). Remove the unit, and strip it down to replace the plunger and releif valve you get from the kit. Good Luck.
Posted on Jul 17, 2009
open your bleeder and pump it dry. when it empty titen the bleeder .and fill you it up . open bleeder and let it get a good stedy drip
Posted on Aug 21, 2009
Tips for a great answer:
Sep 30, 2016 | Cars & Trucks
Apr 02, 2016 | Cars & Trucks
Feb 28, 2015 | Cars & Trucks
Apr 15, 2014 | 2007 Hyundai Santa Fe Limited
Feb 16, 2012 | 1983 Nissan 280ZX
Nov 18, 2010 | Nissan Minivan Cars & Trucks
Oct 28, 2010 | 1991 Isuzu Stylus
Aug 28, 2009 | 2000 Pontiac Firebird
22 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: