Question about Cars & Trucks
Hazar is working but signal no work
Signal flasher is burnt out, need a new one. the hazards work on a different flasher
Posted on Jul 25, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
the flasher is locaed in the fuse box in the dash. it looks like a small square box.
are both sides not working or just 1?
Posted on Jul 16, 2008
SOURCE: no turn signals............
If you look under the dash on the left hand side you will see the fuse area, behind this you should see a large ( about 1 - 2 inch) black square block. These usually sell for about 10 - 15 dollars each at the local auto stores. This is a link to a picture of them. Carry this into your local parts store and put in the new one and you should be good to go.
Please let me know if I can offer further assistance! I hope you found my answer helpful - if you need clarification please just ask me!
Posted on Jan 03, 2009
check the switch it self may have to replace if everything is good grounds powers and lights, you can use a jumper wire to provide power to a ligh and if it illuminates you know the circuit is good, test each circuit and if all working replace
Posted on Aug 04, 2009
Tips for a great answer:
Jan 04, 2013 | 2000 Dodge Neon
Nov 03, 2012 | Dodge Cars & Trucks
Jul 27, 2012 | Cars & Trucks
Apr 08, 2011 | 2000 Dodge Neon
Aug 17, 2008 | 2003 Dodge Neon
Jul 15, 2008 | 2004 Dodge Neon
49 people viewed this question
Usually answered in minutes!