Question about Cars & Trucks

Open Question

Change cylinder head temp. sensor 1999 ford e250 6cylinder

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 12 Answers

SOURCE: Need to know the location of coolant temp sensor

it should be right by the upper radiator hose. it just unscrews. go to auto zone they can help..youll have to drain some coolant. or go to the library for help

Posted on Apr 09, 2009

craigjamesbt
  • 65 Answers

SOURCE: how do i change cylinder head sensor and where is it located

if you know engine fairly well the sensor should be pretty easy to spot it will be coming out of the cylinder head and have a wire attached to it although I haven't done much work on those models I wasn't aware they had that type of sensor are you sure your not looking for the temp sending unit? if so you will need to look on the intake manifold or near the water pump either way you may consider buying the sensor first then matching it with the wire/wires coming into it then simply unplug that sensor and unscrew (standard threads) make sure to properly seal the threads on the new one tighten to spec (be careful not to over tighten this component more than likely will thread into aluminum threads) better to be to loose and have to be tightened again than to have to replace a major component

Posted on Apr 26, 2009

chuck943
  • 783 Answers

SOURCE: location of CHT sensor

It is located at the back of the passenger side cylinder head close to where the intake manifold and head meet.It will have a YE/LG and GY/RD wires to it.

Posted on May 24, 2009

  • 7353 Answers

SOURCE: cannot locate cylinder head temp sensor on a 1997

top front of engine. left side.

Posted on Sep 24, 2009

  • 1810 Answers

SOURCE: Where is the Cylinder Head Temp Sensor on the 2001

chilton make a great bible for your car that will help it's sold at chapters

Posted on Jan 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Installed new cylinder head temp sensor,why is temp gauge still going all the way to hot?


Is this a ford ? Don't know of any other car maker using cylinder head temp sensor ! Is the cooling system full an no air ? probably a gauge problem !

Sep 29, 2015 | Cars & Trucks

2 Answers

I have a 2005 Ford Explorer. Where is the engine temperature sensor?


What engine does yours have ? 4.0 L or 4.6 L 4.6 L has cylinder head temp. sensor only The 4.0 L has a coolant temp. sensor only !

Mar 31, 2015 | 2005 Ford Explorer

3 Answers

I have a 2004 Ford F-150 5.4 triton and I was reading a bad code retaining to the coolant temp sensor so i replaced the cylinder head temp sensor as shown and now I'm reading a code for the cylinder head...


You have to clear the codes. Go to your Ford dealer (not all can do this). The cheaper solution is go to your local auto parts store and ask them to clear the codes. It's usually free. Sometimes some codes won't come off when you use the "remove the positive cable from your battery and touch it to the negative post for about 10 seconds". Careful hear, do it right as if you get a spark you are doing something wrong. As to the auto parts store they can or should give you all the codes including the new ones as I think you didn't disconnect the battery when you you changed the sensor.

Mar 27, 2015 | 2004 Ford F150

1 Answer

Why is failsafe mode activated when engine appears to be not overheated


some fords have a cylinder head temp sensor this what controls that type of failsafe.

Jun 05, 2014 | 1999 Mercury Grand Marquis

1 Answer

Temp gauge wont go up hard to start


most likely the temp sensor is bad that would make the car start hard by adding to much fuel and also would make the gauge not work. it is easy to change by unscrewing the old sensor that is located in the end of the cylinder head.

Dec 06, 2010 | 2002 Ford Escort

1 Answer

Replacing coolant temperature sensor on 5.4L, where is it located?


its not a true coolant temp sensor. you are looking for cylinder head temp sensor. it is located on the driver's side head, at the front, on the inboard side of the head.

Oct 02, 2009 | 2000 Ford F150 Flareside SuperCab

1 Answer

Location of CHT sensor


It is located at the back of the passenger side cylinder head close to where the intake manifold and head meet.It will have a YE/LG and GY/RD wires to it.

May 24, 2009 | 2005 Ford Expedition

1 Answer

How do i change cylinder head sensor and where is it located


if you know engine fairly well the sensor should be pretty easy to spot it will be coming out of the cylinder head and have a wire attached to it although I haven't done much work on those models I wasn't aware they had that type of sensor are you sure your not looking for the temp sending unit? if so you will need to look on the intake manifold or near the water pump either way you may consider buying the sensor first then matching it with the wire/wires coming into it then simply unplug that sensor and unscrew (standard threads) make sure to properly seal the threads on the new one tighten to spec (be careful not to over tighten this component more than likely will thread into aluminum threads) better to be to loose and have to be tightened again than to have to replace a major component

Apr 19, 2009 | 1998 Ford F150 Regular Cab

2 Answers

Air problem


have you checked your filters ?? air, mass meter, any hose burnt , cracked, ??
also there is a throttle position sensor that is in charge of opening and closing the intake, if thats faulty it will cause this problem too.

May 15, 2008 | 1999 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...