Question about Cars & Trucks
Sounds like the timing belt has broke and what the shudder was its death throes
Posted on Jul 24, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Remove wheel & tire,
remove 2 torx bolts that go from the inside to the outside of the vehicle. They are on the inner side of the brake caliper.
lift the caliper out of the rotor.
remove the brake pads.
To install, you must first squeeze the caliper piston back inot its bore. Do this slowly to prevent damage to the piston. You are forcing excess brake fluid back into the master cylinder reservoir. Slow constant pressure will get the job done. Use a large c clamp or a wooden hammer handel if that's all you have.
Fit the new brake pads in the calipers and slide the assembly back over the rotor.
install the 2 torx bolts, size 40? head I think.
You are done.
If rotors are scored bad, replace them too.
Posted on Jan 21, 2009
This can be your Idle control valve, when you turn the air on it puts the engine under load and your computer will increase the idle automatically to prevent the engine from cutting out.
When you are standing still and the car is shaking, by touching the accelerator very softly does the shaking stop? If so check the idle control valve.
I hope this will help.
Posted on May 13, 2009
SOURCE: 1999 Nissan Quest washer tank
Visit the site below for the needed parts:-
Rate this solution.
Posted on Jan 11, 2010
Tips for a great answer:
Mar 02, 2015 | Nissan Cars & Trucks
Dec 11, 2012 | 1999 Nissan Quest
Dec 31, 2010 | 1999 Nissan Quest
Jun 17, 2010 | 1999 Nissan Quest
Oct 08, 2009 | 1999 Nissan Quest
Aug 10, 2009 | 2004 Nissan Quest
May 13, 2009 | 1999 Nissan Frontier
Aug 05, 2008 | 2002 Nissan Quest
Jul 20, 2018 | Cars & Trucks
30 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: