Question about Cars & Trucks
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Good morning! I am enclosing a serpentine belt routing diagram to aid in the installation of your serpentine belt. There are 4 different engine possibilities but i have enclosed all. The serpentine belt tensioner is released by rotating in a clockwise direction as shown in the diagrams. Engine configuration will determine what tools you need but the installation is relatively easy to do. Have a great day!
Posted on Oct 04, 2009
Looking at the engine from front (right side of the Van): Stating at the Top, Going Left to Right and Clockwise:
Over the Alternator
To under the Idle Pulley,
To Over the AC Compressor.
To the Left Side of the Water Pump.
To the Right side and Under the Crankshaft Pulley
To the Right side and Over and Down the Tensioner
To Under the Power Steering Pump
And Back up-to the Left side of the Alternator.
Advise when puting it on:
Put the Belt around everything else accept for the Alternator. After it is around all the rest of the Pulleys - Pull the belt up - tight from the Power steering Pump and the Idle Pulley to form a loop, holding the Belt close to the Altenator Pulley.
Using the 15mm wrench or belt tensioner bar - rotate the Tensioner Pulley towards the front of the Van and then place the belt over the Alternator.
Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!
Posted on Jan 22, 2010
Tips for a great answer:
Jul 14, 2014 | Dodge Ram 2500 Cars & Trucks
Feb 28, 2018 | 2001 Dodge Caravan
Jan 22, 2011 | 1991 Dodge Caravan
Accessory drive belt adjustment-3.3L and 3.8L engines
Click to Enlarge
All of the belt driven accessories on the 3.3L and 3.8L engines are driven by a single serpentine belt. The belt tension is maintained by am automatic tensioner.
Raise the front of the vehicle and safely support it with jackstands.
Remove the right front splash shield.
Release tension by rotating the tensioner clockwise.
Remove the belt and install a replacement.
Proper belt tension is maintain by the dynamic tension.
Install the right front splash shield. Lower the front of the vehicle.
Oct 23, 2010 | 1993 Dodge Caravan
Jun 19, 2010 | 1994 Dodge Grand Caravan
Jun 01, 2010 | 1994 Dodge Grand Caravan
135 people viewed this question
Usually answered in minutes!