Question about Cars & Trucks

Open Question

I have a 98 2.5 ford contour that wont start i got codes p1000 and p1116 can you help me

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: 98 Ford Contour not charging

I dont know if yours is a 4 or 6 cyl. On the back of the motor by the firewall there is a 175 amp mega fuse inline on the positive cable comming from the battery. On the 4 cyl it is below the air box center of the back of the motor. On the 6 cyl, it is below the coil pack on the center back of the motor. Be sure to disconnect the negitave battery cable before you attempt this. There is a 3 inch long cover you pop off and you will see it. It takes a 10mm socket to unbolt it. Remove the fuse and ohm it out, if there is no continuity, you have a bad fuse, replace it. I have had 3 people replace their bats and alts ($350 in parts) just to find out it still had the problem. An $8 fuse. Good luck and hope this helps..

Posted on Jul 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My car won't start and is showing a p1000 code . What does this mean?


P1000 is a manufacturer specific fault code:

Ford P1000: OBDII Monitor Testing Not Complete.
Jaguar P1000: Engine control module (ECM) - internal error.
Kia P1000: System diagnosis incomplete.
Land Rover P1000: Engine control module (ECM) memory erased - no codes stored.
Mazda P1000: OBDII Drive Cycle Malfunction.

So depending on the manufacturer of your car would depend on the meaning of a P1000 code!

Jan 21, 2015 | Cars & Trucks

1 Answer

I have a 2000 Ford Focus. The other day while driving the engine suddenly lost power. when I pulled over and pushed in the clutch it stalled and would not start. I towed it home and replaced spark plus,...


Is this the dual overhead cam Zetec engine or the SPI engine? Get a spark tester, a compression tester, and a can of starter fluid. You can rent the compression tester from some part stores. Spray some starter fluid into the intake and try to start the engine. If it runs or tries to start, then you are probably looking at a fuel issue. If it doesn't try to start, remove a spark plug wire and install the spark tester. If it has spark, then remove the spark plugs and use the compression tester in all four cylinders. If you can't get more than 150 psi on each cylinder, then you are looking at a timing belt issue. Post the results of your test here for more help.

Mar 21, 2011 | 2000 Ford Focus

1 Answer

What are the error codes p1000 and p1116


P1000-OBD System Readiness Test Not Complete

P1116-Engine Coolant Temperature Sensor Out
of Self Test Range

Mar 05, 2011 | 1998 Ford Explorer

1 Answer

Ruff starting 98 ford contour in the mornings


i have a 1996 contour it dose the same thing but when im at a stop light i have to hold my foot on the gas and the breaks so it wont die. but i dont have a solution but i need one

Apr 01, 2010 | 1998 Ford Contour

1 Answer

Need diagram for 1998 Ford Contour serpentine belt.


1998 FORD CONTOUR - L4 2.0L 1989cc 121ci BI-FUEL FI N Z

Multiple Accessory, w/o A.C.
76f0cdb.jpg


Multiple Accessory, w/A.C. (Mfg. After 2/98)
0e0818e.jpg

Multiple Accessory, w/A.C. (Mfg. Before 2/98)
d6d97b4.jpg

More details, can find in DAYCO Catalogue

I hope helped with this. Good luck (remember rated thie help).

Dec 04, 2009 | 1998 Ford Contour

1 Answer

98 ford contour hesitates when raining/wet


has the system been tested for trouble codes? if none are present replace the MAF sensor.

Jun 18, 2009 | 1998 Ford Contour

1 Answer

My ford contour wont start up


98 FORD CONTOUR CAR DIED HAD FUEL PUMP REPLACED. TOLD IT NEEDED CAT AS WELL DONE ALSO. CAR STILL WONT START AND STAY RUNNING PROPERLY. WHEN IT DOES RUN ITS IN SHORT SPIRTS AND STRONG FUEL AND SMOKE COMES OUT OF TAILPIPE?

May 24, 2009 | 1999 Ford Contour

1 Answer

98 ford taurus starts, runs, dies


change the coolant temp sensor and rest the codes then try
cleam the MAF by brake and parts cleaner

i hope its help thanx

Mar 22, 2009 | 1998 Ford Taurus

2 Answers

98 ford contour


what is the timing belt like is there lots of miles on it

Feb 15, 2009 | 1997 Ford Contour

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...