Question about Cars & Trucks

Open Question

Lynx 1.8l ohc tc diesel 110ps specs

Hello, does any one know what is the engine oil pressure specs for ford transit connect engine Lynx 1.8l ohc tc diesel 110ps ? thanks, Roman

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

samson-1
  • 153 Answers

SOURCE: ford focus turbo diesel low oil pressure with no knocks from engine

Possible oil sending unit problem.

Posted on Oct 24, 2008

emissionwiz
  • 75108 Answers

SOURCE: 2004 f250 6.0 diesel engine oil cooler

U can do this, use a B&M brand cooler, use a kit for your truck if availiable get one with screw in hose fittings, never use hose clamps on an oil cooler if u can avoid it, if u choose to use clamps check them and tighten them as ness at every oil change. try the link below for a cooler.

http://performanceparts.com/product_group.php?vendor=BAM&pgid=11&sgid=332&gclid=CMqvlNq_yJcCFSAUagodlwubTQ

Posted on Dec 17, 2008

  • 1 Answer

SOURCE: Transit wiring diagram

'98 ford transit van 2 ltr petrol tacho wire which colour wire is it in dash board if some one knows it will be great. thks phil

Posted on Oct 03, 2009

  • 832 Answers

SOURCE: 2003 ford transit diesel fuel getting to injectors

Have your injection pump checked. If the diesel fuel feed
going to the pistons is not highly atomized, there's no way that the diesel fuel gets to explode to keep your
engine to run. However, also check the air filter system
going to your engine. To get the diesel fuel to explode needs right air fuel ratio. Once these are checked, I'm
sure you get your diesel car running.

Posted on Nov 08, 2009

  • 1 Answer

SOURCE: FORD FOCUS OIL LIGHT STAYING ON

i have exactly the same problem, same model and year, car runs perfect but oil light comes on after 5 mins or so. its got me stumped!

Posted on Dec 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The 2005 Isuzu 4HL1 smoother E engine has no power over hills what could be th problem


loosing compression
fuel delivery

if its the DiD ...internal carbon build up

Jun 30, 2016 | Isuzu Cars & Trucks

1 Answer

WHY DOES MY ISUZU 4HL1 ENGINE HAVE A HARD START ALWAYS?


no car stated, huge NPR truck no less.
no year stated
so no free book information on that engine,.
big diesel. 4HL1, no dash letter?
compression at spec.?
glow plugs work.,
filters clean. water in fuel,
does test fuel (spray'd) help? ???
injection problems
lack of startup air.(filter)


The 4HL1 is a common rail direct injection OHC 16V high-pressure fuel injection system diesel engine of 4.777 L capacity with electronic control system. Peak torque is 333 Nm, peak power is 140 PS (103 kW) at 3,000 rpm. Maximum torque is (34.0 kg m)'/1,500 rpm. Bore is 115 mm, stroke is 115 mm.
The 4HL1-N is a common rail direct injection OHC 16V high-pressure fuel injection system diesel engine of 4.777 L capacity with electronic control system. Peak torque is 333 Nm, peak power is 131 PS (96 kW) at 3,000 rpm. Maximum Torque is (34.0 kg m)'/1,500 rpm. Bore is 115 mm, stroke is 115 mm.
The 4HL1-TC is a common rail direct injection OHC 16 V turbocharged and intercooled high-pressure fuel injection system engine of 4.777 L capacity with electronic control system. Peak torque is 425 Nm, peak power is 160 PS (118 kW) at 2,700 rpm. Maximum torque is (43.3 kg m)'/1,500 rpm. Bore is 115 mm, stroke is 115 mm.
The 4HL1-TCS is a common rail direct injection OHC 16 V turbocharged and intercooled high-pressure fuel injection system diesel engine of 4.777 L capacity with electronic control system. Peak torque is 500 Nm, peak power is 179 PS (132 kW) at 2,700 rpm. Maximum torque is (51.0 kg m)'/1,500 rpm. Bore is 115 mm, stroke is 115 mm.

May 31, 2016 | Isuzu Cars & Trucks

1 Answer

What engine oil to put in ford transit mark 7


5w20 is gas engines and 15w40 in diesels. It is up to you if you want regular oil or synthetic.

Mar 01, 2015 | Ford Cars & Trucks

1 Answer

Where is oil filter located on a 2002 ford transit diesel manual engine


Of it has a 6.0L engine it is on top of the engine righ where a carburator supposs to go, this is for a ford f350 diesel

Oct 12, 2012 | Ford Transit Cars & Trucks

1 Answer

I have a ford ka y reg done 75000 miles what type of oil should i put in someone told me 15/40 and another said 5/40


what is Y or 52 or whatever ----please state year ,anyway use the cheapest oil you can buy from supermarket for a diesel/petrol synthetic or natural ,viscosity ¿¿ well 20/50 10/40 is plenty good enough and change the oil every 6000miles and the oil filter every third oil change and this little kent engined ford which is unchanged since the ford anglia 1962 first used this engine and it will run forever ,and yes you can mix the oil if your just topping up.I remember working in the factory 40 yrs ago building these engines at 3 engines a minute on the assembly and in them days we used shell rotella oil and it went in every type of engine from the dorset diesel (D series) to the transit V engine and the york 2.4 diesel to the zodiac V6 3 litre ,now their was a nice car if you can one .

Mar 04, 2011 | Ford Focus Cars & Trucks

1 Answer

I need to know where the oil sending gauge is in a 1993 ford f250


Oil pressure switch location - 4.9L engine

tecnovative_92.gif
Oil pressure switch location - 5.0L/5.8L engines

tecnovative_93.gif
Oil pressure switch - 7.3L diesel and 7.5L gasoline engines (adapter is for 7.3L only)

tecnovative_94.gif

Feb 04, 2011 | Ford F-250 Cars & Trucks

2 Answers

2006 ford f350 deisel turns over wont start unless i use starting fluid it then runs great. changed fuel filter oil filter and oil, wrench symbol came on went into engine fail safe mode, said something...


the diesel engine is a 6.0L or a 6.4L? because the 6.0L don't use electronic throttle control. they control the demand of diesel threw the high pressure oil system they have a sensor call injector pressure regulator. this sensor is responsible of maintain the proper pressure in the high pressure oil system so that the engine could start . i also suggest you to check if it is any leak on the high pressure oil system or if the low pressure system is delivering the pressure required for the high pressure system to work properly. to do that you most have a scan tool. also you can check the pressure of the diesel pump that its in the chassis to eliminate the high pressure oil system as the cause of your concern. if u don't have the proper gauges to check the pressure of the diesel pump you could remove the cap of the small fuel filter that is next to the oil filter remove the filter and put the ignition switch in the on position and see in the container if you have a fast or slow filling. if you encounter that the filling is too slow then your problem is with the fuel diesel pump that is on the chassis this pump is called HFCM, Horizontal Fuel Control Module

Jan 30, 2011 | 2006 Ford F 350 Super Duty

2 Answers

Exact location of oil sending unit on a 95 ford taurus 3.8 v6?


on OHV engine,at rear of engine block,just ahead of transaxle
on OHC on forward side above oil filter.

Oct 16, 2009 | 1995 Ford Taurus

1 Answer

Lo oil pressure at start up


YOUR OIL PRESSURE SHOULD COME UP QUICKLY AFTER THE ENGINE IS STARTED. IF THE ENGINE IS CLATTERING THE THE PRESSURE IS LOW AND YOU MUST FIND THE CAUSE OR ENGINE DAMAGE WILL RESULT. IF YOU NORMALLY HAVE GOOD OIL PRESSURE CHECK THE PRESSURE SENDING UNIT. IT MAY HAVE GOOEY OIL DEPOSITS PLUGGING THE PASSAGE. OR, IF YOU HAVE ACCESS TO A MECHANICAL GAGE CONNECT IT TO THE OIL PORT AND GET AN MECHANICAL PRESSURE CHECK.

Jan 24, 2009 | 2000 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...