Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
dear friend:here follows the settings in need:
cylinder head-30-35 nm + 30-35 + 65deg + 65deg.
big ends- 1 - 26nm 2 - 52NM
cam-sprocket - 100-120
crank-pulley - 170-180
cam caps -15nm
Posted on Sep 23, 2009
Torque in two to three stages.
Connecting rods are 24-26 lb.ft.
Main bearing caps are 41-44 lb.ft.
Hope this helps,Chuck
Posted on Dec 28, 2009
Testimonial: "Thanks for the help Chuck"
Cylinder heat bolt torque:
Torque sequence --------- front | 7 3 1 5 | | 8 4 2 6 | --------- Step 1: Torque all bolts in sequence to 14 Ft/Lbs Step 2: Torque all bolts in sequence to 29 Ft/Lbs Step 3: Torque all bolts in sequence to 36 Ft/Lbs Step 4: in the sequence, loosen the cylinder head bolts three turns. Step 5: Tighten short bolt to 15 - 32 Ft/Lbs Step 6: Tighten long bolt to 30 - 36 Ft/Lbs Step 7: Tighten all bolt to 175- 185 degree note: Do not loosen all of the cylinder head bolts at one time. Each cylinder head bolt must be loosened and the final tightening prior on the next bolt in the sequence.
Main bearing torque:
Torque sequence: Step 1: torque bolts to 91 Ft/Lbs with the exception of the rear main bearing cap Step 2: torque rear main bearing cap bolts to 88 Ft/Lbs Step 3: torque brace bolts to 40 Ft/Lbs
Connecting rod torque:
Torque sequence Step 1: Torque to 29 Ft/Lbs Step 2: Turn an additional 90 degrees
Posted on May 18, 2010
Tips for a great answer:
Oct 29, 2017 | Hyundai Cars & Trucks
Sep 18, 2015 | Hyundai Cars & Trucks
Jun 08, 2015 | 2008 Hyundai H100 2.6iD
Aug 01, 2014 | 2008 Hyundai H100 2.6iD
Jun 10, 2012 | Hyundai Cars & Trucks
May 26, 2012 | Hyundai Cars & Trucks
Dec 27, 2009 | 2000 Hyundai Accent
1,056 people viewed this question
Usually answered in minutes!