Question about Cars & Trucks

Open Question

88 lebaron 2.5l spark plug gap

I have a 1988 Chrysler Lebaron 2.5L (no Turbo), and I'm having trouble finding what the spark plug gap should be

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


SOURCE: car info

cylinder numbers: starting at the timing belt side you have : 1-2-3-4
the firing order in the 2.5 L4 engine is 1-3-4-2
the spark plugs wiring diagram is: on the distributor head, the plug located near the engine block is the number one cylinder. then you start numbering from left to right (eg from the timing belt to the battery), like this: 1 - 3 - 4 - 2 (so, the distributor head plug opposite to the engine is for spark plug number 4).
hope this helps!

Posted on Aug 06, 2009

  • 8 Answers

SOURCE: how do i adjust a very high idle on my chrysler

Shoot it with a shot gun and then put it in drive while at idle rpm then should be fine you may have to kick the tire and bend the antenna a little bit to get the right rpm back

Posted on Sep 18, 2009

  • 1985 Answers

SOURCE: changing fuel filter 1988 LeBaron 2.5 non-turbo

follow the fuel line from tank,it will be under passenger/rear under car.

Posted on Jan 03, 2010

SOURCE: 1988 LeBaron 2.5L non-turbo sudden oil loss

If You Had replaced The Seal After That Also Oil Leakage Is Occur, Then It Is a Problem Of BAck Compression Please Check It. thanks.

Posted on Jan 14, 2010

Testimonial: "Going to check cam end plug."

  • 477 Answers

SOURCE: i have a 1985 chrysler

If pressing on the brake pedal causes the engine to run slow or rough , I would think that you might have a leak in your brake booster. It works off of vacumme from the engine , and a vacumme leak will cause rough or slow idle. Try to unplug the vacumme line from the booster , and plug it with something like a bolt and then see if steping on the brake still causes the engine problem.
DO NOT DRIVE with the hose unpluged as you will have very little brakeing ability.

Posted on Jan 28, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i change the transmission fluid on my 1988 lebaron turbo

some mechanics remove the hose going to the cooler tank and run the engine at idle till oil stops running. I like to remove the oil pan, clean it and fit a new filter.

Feb 23, 2015 | 1988 Chrysler LeBaron

1 Answer

1988 chrysler lebaron turbo 2.2 liter no speed going up hill at all slow what could be the problem

It may be the car speed not to meet the condition of starting turbo 2.1 liter, so turbo has not speed function. Check car by diagnostic tool regularly.

Oct 25, 2012 | 1988 Chrysler LeBaron

1 Answer

My car is running poorly, it feels like it's not getting rnough fuel. I drove it all day. Then when it sat still for 5 hours it would stay running to save my life. It's a 88 lebaron

Bad crank position sensor or fuel pump. Check fuel pressure at engine compartment where it goes into fuel injection. If OK, usually bad crank postion sensor.

Jun 02, 2011 | 1988 Chrysler LeBaron

1 Answer

My engine is idling to high in my 88 lebaron! why?

most likly cause is blocked air intake like a air filter this causes the engine to look for more fuel because it cant get enough air,adrian,,,,,

Jun 26, 2010 | 1988 Chrysler LeBaron

1 Answer

Changing fuel filter 1988 LeBaron 2.5 non-turbo

follow the fuel line from tank,it will be under passenger/rear under car.

Jan 01, 2010 | 1988 Chrysler LeBaron

1 Answer

1989 Chrysler Lebaron 2.5 Turbo Running slugglish

check if you have a spark when engine dies. if not, check the rpm sensor or ignition coil. both have the simptoms like you describe.


Oct 08, 2009 | 1989 Chrysler LeBaron

2 Answers

Passenger side cv axle keeps breaking

Contact your local parts store. Some are the same and some are different. I believe that the passenger axle shaft is longer than the drivers side.

Apr 01, 2009 | 1988 Chrysler LeBaron

1 Answer

86 lebaron gts will not turn over

what engine does your lebaron have ? TBI or turbo ?

Dec 18, 2008 | 1986 Chrysler LeBaron

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

13735 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides