Question about Cars & Trucks

Open Question

Service engine code PO 1680

I stopped by Autozone. They gave me code PO1680. What is this and what do I do?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 218 Answers

SOURCE: I have a 2008 VW Passat. When the engine light came on I stopped at Autozone and they gave me the following codes: P0089, P0642, P2004. Anyone know what they mean?

CODE 89 IS FUEL PRESSURE REGULATOR 1 PERFORMANCE.CODE 642 SENSOR REFERANCE VOLTAGE CIRCUIT "A" LOW.AND CODE 2004 IS ITAKE MANIFOLD RUNNER CONTROL STUCK OPEN.CK FOR BAD OR MISSING VACUUM LINES.IS IT STILL UNDER WARRANTY

Posted on May 05, 2009

  • 40 Answers

SOURCE: Mitsubuishi Montero sport 1999 problem code

P0173 Fuel Trim Malfunction Bank #2

Posted on Jun 01, 2009

  • 1986 Answers

SOURCE: My check engine light is on for my 2006 audi a4

Your MAF may be dirty and needs to be cleaned or replaced. You may have a vacuum leak.

In the vast majority of cases, simply cleaning the MAF sensor does the trick. Consult your service manual for it's location if you need help. I find it's best to take it off and spray it with electronics cleaner or brake cleaner. Make sure you are careful not to damage the MAF sensor, and make sure it's dry before reinstalling
Inspect all vacuum and PCV hoses, replace if necessary
Check for a dirty fuel filter and proper fuel pressure

Posted on Oct 06, 2009

  • 1752 Answers

SOURCE: service engine soon light came on. AutoZone read

Sometimes you have to wait a week for the light to go off, the computer has to go through several start/run/stop cycles.

Posted on Nov 22, 2009

czaa
  • 4514 Answers

SOURCE: I just had my valve

yes if the mechanic was sloppy--any service theres a risk of screwin somethin else up--u need to hook it up to a tech II scanner for a data stream to obtain precise info-dont just go changin parts--1st look over engine to see any damages

Posted on Feb 19, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Honda Accord po-7*** errors


You can't fix these types of complex electronic engine control problems without special equipment.

Jun 12, 2013 | Honda Accord Cars & Trucks

1 Answer

Engine Code PO 300 and PO 316 came up when running diagnostic


P0300 is random multiple cylinder misfire and P0316 is misfires detected on start up. This is an ignition related issue. I would check the ignition system and tune up condition and proceed from there also if you have access to a sanner with live data capability check that you have and RPM reading when cranking the engine and the times it deosnt want to start this would indicate an issue with the crank sensor

Oct 24, 2012 | 2005 Ford Taurus

1 Answer

Please tell me what this means,,, po171 band 1 system too lean and po174 band 2 system too lean, thank you, jill


PO 171--is an O2 Sensor Code for a Lean Condition
on Bank 1 (right side exhaust)

PO 174 -- is an O2 Sensor Codes for a Lean Condition
on Bank 2 (left side exhaust)

You gave us no vehicle
You gave us no drivability issues or
vehicle history,nothing

If the O2's have 100,000 miles on them,change the (2)
closest to the engine. They are most likely worn out
& the switching times are too slow to control injector
pulse width & thus set a MIL Lamp (OBD2 Fault ) on
your dash

You can learn a lot on the internet if you put OBD2 in your
Search Engine (Internet Explorer,etc)

Jul 15, 2011 | Lincoln Town Car Cars & Trucks

1 Answer

I just had my valve cover gasket changed on my 2001 Nissan Frontier 2WD SE V6 3.3L on 2/13/11 and today my service engine light came on I took it to auto zone to have it plug up to find out the codes for...


yes if the mechanic was sloppy--any service theres a risk of screwin somethin else up--u need to hook it up to a tech II scanner for a data stream to obtain precise info-dont just go changin parts--1st look over engine to see any damages

Feb 19, 2011 | 2001 Nissan Frontier Crew Cab

1 Answer

This morning I looked while I was driving and my engine light, seat belt light, abs light etc was all on while I was driving. Once I stopped and turned the vehicle off, I restarted it and only the engine...


PO-1120 Throttle Position Sensor Out Of Range

Why would you go to Auto Zone and come away without knowing what the code was?
For $50.00, you can get the least expensive code reader.

May 14, 2010 | 2005 Dodge Durango

1 Answer

Engine light on


You need to read the computer fault code to determine why. Take the car to any auto parts store (O'Reilly, Autozone, Napa, etc.). They will read it for you for free. They will give you a code that starts with PO something. Ex: PO435, PO317, etc. The code can then be translated to what is wrong with your Camry. It only take a copule minutes to read the code. They should also have the chart that tells you what the PO code means (what's wrong).

May 13, 2010 | 2001 Toyota Camry Solara

1 Answer

Check engine light is flashing and car is shaking especially when i accelerate


You are experiencing a secondary ignition miss fire.The most likely cause would be one or more spark plug wires breaking down .If you can go to a Autozone parts store they can check the codes for free .PO 301 to PO 306 codes would be miss fire codes.:)

Sep 06, 2009 | 2002 Dodge Grand Caravan

1 Answer

I have a 2008 VW Passat. When the engine light came on I stopped at Autozone and they gave me the following codes: P0089, P0642, P2004. Anyone know what they mean?


CODE 89 IS FUEL PRESSURE REGULATOR 1 PERFORMANCE.CODE 642 SENSOR REFERANCE VOLTAGE CIRCUIT "A" LOW.AND CODE 2004 IS ITAKE MANIFOLD RUNNER CONTROL STUCK OPEN.CK FOR BAD OR MISSING VACUUM LINES.IS IT STILL UNDER WARRANTY

May 05, 2009 | 2008 Volkswagen Passat Sedan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...