Question about Cars & Trucks

Open Question

Po 141 02 sensor heater fault (bank 1 sensor 2)

Whare is it lokated

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
txkjun
  • 409 Answers

SOURCE: check engine light come on fault codes PO165 and PO155

Yes sorry but they both should be replaced. 

Posted on Dec 26, 2008

Ad
seanpwright
  • 2030 Answers

SOURCE: bank 1 sensor 1 heater circuit fault.

you have a bad wire going to sensor 1...ohm out the wires

Posted on Jan 19, 2010

conveyician
  • 110 Answers

SOURCE: po 141 02 sensor heater fault (bank 1 sensor 2)

OK, you have 2 Oxygen sensors on your vehicle. They are both mounted on your exhaust. You have one in front of the catalytic converter(Bank 1 - Sensor 1) / Then you have another after the catalytic converter (Bank 1 Sensor 2). Make sure they give you the correct Oxygen sensor at the parts store because they are different. Napa Part # DEN 2344701 for the DENSO one that is after the catalytic converter. You will see it sticking out of the exhaust pipe right after the catalytic converter - with wires and a plug. When you replace it, make sure you don't drop the new one, or get ANYTHING on the sensor Tip - there will be some anti-seize on the threads, make sure you don't wipe that off or get it on the sensor tip. You will need to have a 22mm wrench, or a 7/8 wrench which is a tad loose but works if you use it right - and they even make a deep socket with a slot in it for the wires just for Oxygen Sensors - I rarely use mine, because there never seems to be enough room for that socket. To loosen, bump the end of the wrench with your palm(wearing gloves) - or if you have a rubber hammer, you can tap the end of the wrench to loosen it. Applying steady pressure can cause issues, from rounding the edges of the bolt, to busting a knuckle - "bumping it" prevents all of that.
When you install the new one, be sure not to over tighten, snug will work great.

** Be sure to support your vehicle with properly rated jack stands, parking brake on, vehicle in park, and chock one tire - never rely on a hydraulic jack, or any jack for that matter.

If you need anything else, let me know.

Take care

Posted on Oct 06, 2010

  • 7353 Answers

SOURCE: Service Engine Soon light

Most likely the Oxygen Sensor is bad, replace it.

Posted on Nov 12, 2010

ZJLimited
  • 17970 Answers

SOURCE: i know where the sensor 2 is but where is the bank

For 1999 Subaru Truck Forester AWD 2.5L MFI 4cyl the Oxygen Sensor is located under hood, center, rear engine area, mounted on catalytic converter.

zjlimited_1032.jpg

Fig. Oxygen sensor location-Forester 1998-2002 2.5L SOHC engine (click over image for zoom).

Generally, Bank 1 is front and Bank 2 is rear.

Hope helps.

Posted on Apr 14, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the codes for hyundai?



HYUNDAI OBDII DTC

P1100 Manifold Absolute Pressure Sensor Range/Performance
P1102 Manifold Absolute Pressure Sensor Circuit Low Input
P1103 Manifold Absolute Pressure Sensor Circuit High Input
P1123 Lang Term Fuel Trim Adaptive Too Lean
P1124 Long Term Fuel Trim Adaptive Too Rich
P1127 Long Term Fuel Trim Multiplier Too Rich
P1128 Long Term Fuel Trim Multiplier Too Lean
P1134 HO2S Bank 1 Sensor 1 Transition Time Switch (Bank 1 Sensor I)
P1154 HO2S Bank 2 Sensor 1 Transition Time Switch (Bank 2 Sensor 1)
P1166 HO2S Bank 1 Sensor 1 Controller Adaptive Diagnosis Fault (Bank 1)
P1167 HO2S Bank 1 Sensor 1 Controller Adaptive Diagnosis Fault (Bank 2)
P1168 HO2S Bank 1 Sensor 1 Heater Power Incorrect (Bank 1 Sensor 2)
P1169 HO2S Bank 1 Sensor 1 Heater Power incorrect (Bank 2 Sensor 2)
P1372 Segment Time Incorrect
P1400 Manifold Differential Pressure Sensor Circuit
P1440 EVAP System Vent Solenoid Circuit
P1443 EVAP System Fault (Fuel Tank Cap Missing)
P1510 Idle Control Valve Opening Circuit Shorted (Coil 1)
P1511 Idle Control Valve Command Signal Shorted (Coil 2)
P1513 Idle Air Control Valve Opening Coil Circuit Open (Coil 1)
P1521 Power Steering Switch Input Circuit
P1529 Customer Snapshot Request VIA CAN
P1552 Idle Air Control Valve Closing Coil Circuit Shorted
P1553 Idle Air Control Valve Closing Coil Circuit Open
P1586 Encoding Signal Circuit Not Rationale
P1602 Serial Communication Fault with Transmission Control Unit
P1605 Rough Road Sensor Circuit
P1606 Rough Road Sensor Circuit Not Valid
P1611 MIL Request Signal Circuit Low Input
P1613 ECU Self-Test Failed
P1614 MIL Request Signal Circuit High Input
P1616 Main Relay Fault
P1623 Diagnostic Lamp Power Stage Fault
P1624 MIL On Request Signal//Cooling Fan Relay Low Circuit
P1625 Cooling Fan Relay High Circuit
P1665 Power Stage Group 'A' Fault
P1670 Power Stage Group 'B' Fault

Dec 08, 2014 | Cars & Trucks

1 Answer

Wheret is the heater circuit?


P0155 is an O2 sensor heater circuit problem Bank 2 sensor 1. Replace the O2 sensor closest to the engine on the passenger side. The heaters are built into the sensor. No repairing them.

May 06, 2014 | 1999 Chevrolet Astro

1 Answer

Computer codes po-141, po-108,


p0141 Chevrolet HO2S-12 (Bank 1 Sensor 2) Heater Circuit Malfunction oxygen sensor bank 1 sensor 2
p0108 Chevrolet
MAP Sensor Circuit High Input
i would do the o2 sensor first

Sep 21, 2011 | 1998 Chevrolet Malibu

1 Answer

I know where the sensor 2 is but where is the bank 1 for my 1999 subaru forrester code PO 141 O2 sensor heater bank1 sensor 2?


For 1999 Subaru Truck Forester AWD 2.5L MFI 4cyl the Oxygen Sensor is located under hood, center, rear engine area, mounted on catalytic converter.

zjlimited_1032.jpg

Fig. Oxygen sensor location-Forester 1998-2002 2.5L SOHC engine (click over image for zoom).

Generally, Bank 1 is front and Bank 2 is rear.

Hope helps.

Apr 14, 2011 | 1999 Subaru Forester

1 Answer

PO 722 1238 137 1618 1132


1132-This Relates to Heated oxygen sensor (H02S) 1, bank 1/heated oxygen sensor (H02S) 2, bank 1 - signal incompatibility
1618-This Relates to Cable fault between AW 50-Q2 TCM and Motronic 4.4 ECM (lamp lights)
1238-This Relates to Turbocharger (TC) boost pressure sensor - boost control malfunction
0137-This Relates to Bank 1, Sensor 2 - Circuit Low Voltage for O2
0722-This Relates to No Signal in Output Shaft Speed Sensor Circuit

Mar 30, 2011 | 2000 Volvo V70

2 Answers

Error codes po 134 po 153 po 154 po 155 po 171 po 174


PO 134 = 02 SENSOR CIRCUIT NO ACTIVITY DETECTED (BANK 1 SENSOR1)
PO 153 =02 SENSOR CIRCUIT SLOW RESPONSE (BANK 2 SENSOR 1)
PO 154 =02 SENSOR CIRCUIT NO ACTIVITY DETECTED (BANK 2 SENSOR 1)
PO 155= 02 SENSOR HEATER CIRCUIT MALFUNCTION (BANK 2 SENSOR 1)
PO 171= SYSTEM TOO LEAN (BANK 1)
PO 174= SYSTEM TOO LEAN (BANK 2)
I WOULD SAY YOU HAVE FAULTY OXYGEN SENSORS CAUSING THE ENGINE TO RUN TOO LEAN REPLACE THEM AND YOU SHOULD BE BACK IN BUISNESS

Feb 23, 2011 | 2004 Suzuki Grand Vitara

1 Answer

Code p1295


iam posting the hyundai code list i have that the vehicle manufacturer lists

P1100 Manifold Absolute Pressure Sensor Range/Performance

P1102 Manifold Absolute Pressure Sensor Circuit Low Input

P1103 Manifold Absolute Pressure Sensor Circuit High Input

P1123 Lang Term Fuel Trim Adaptive Too Lean

P1124 Long Term Fuel Trim Adaptive Too Rich

P1127 Long Term Fuel Trim Multiplier Too Rich

P1128 Long Term Fuel Trim Multiplier Too Lean

P1134 HO2S Bank 1 Sensor 1 Transition Time Switch (Bank 1 Sensor I)

P1154 HO2S Bank 2 Sensor 1 Transition Time Switch (Bank 2 Sensor 1)

P1166 HO2S Bank 1 Sensor 1 Controller Adaptive Diagnosis Fault (Bank 1)

P1167 HO2S Bank 1 Sensor 1 Controller Adaptive Diagnosis Fault (Bank 2)

P1168 HO2S Bank 1 Sensor 1 Heater Power Incorrect (Bank 1 Sensor 2)

P1169 HO2S Bank 1 Sensor 1 Heater Power incorrect (Bank 2 Sensor 2)

P1372 Segment Time Incorrect

P1400 Manifold Differential Pressure Sensor Circuit

P1440 EVAP System Vent Solenoid Circuit

P1443 EVAP System Fault (Fuel Tank Cap Missing)

P1510 Idle Control Valve Opening Circuit Shorted (Coil 1)

P1511 Idle Control Valve Command Signal Shorted (Coil 2)

P1513 Idle Air Control Valve Opening Coil Circuit Open (Coil 1)

P1521 Power Steering Switch Input Circuit

P1529 Customer Snapshot Request VIA CAN

P1552 Idle Air Control Valve Closing Coil Circuit Shorted

P1553 Idle Air Control Valve Closing Coil Circuit Open

P1586 Encoding Signal Circuit Not Rationale

P1602 Serial Communication Fault with Transmission Control Unit

P1605 Rough Road Sensor Circuit

P1606 Rough Road Sensor Circuit Not Valid

P1611 MIL Request Signal Circuit Low Input

P1613 ECU Self-Test Failed

P1614 MIL Request Signal Circuit High Input

P1616 Main Relay Fault

P1623 Diagnostic Lamp Power Stage Fault

P1624 MIL On Request Signal//Cooling Fan Relay Low Circuit

P1625 Cooling Fan Relay High Circuit

P1665 Power Stage Group 'A' Fault
P1670 Power Stage Group 'B' Fault

Feb 10, 2011 | 2008 Hyundai Sonata

1 Answer

I OWN A 2002 DODGE INTREPID AND IT COMES UP WITH THESE CODES P0700,P0056,P0135,P0141,P0155,P0161 CAN YOU TELL ME WHAT THEY MEAN?


po700 is automatic transmission fault detected. poo56 is didnt see .po135 is upstream heated o2sensor heater circuit fault bank 1. po155 upstream heated o2 sensor heater circuit fault bank2.po 161 is downstream heated o2 sensor heater circuit fault bank 2.

May 15, 2009 | 2002 Dodge Intrepid

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...