Question about Cars & Trucks

Open Question

Changing fog light bulbs on Isuzu KB300 - Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

j_del
  • 1586 Answers

SOURCE: How do you change the fog light bulb on 1993 zx?

Take out the small screws that hold your turn signal/marker lights on. This will allow you to reach in and undo the three (if I remember right) 10mm nuts on the back of the fog housings that hold them in the bumper. Once they're removed, press on the back of the fog housing and the foglight assembly will pop out of the bumper. Then you can replace the bulbs.

What I did on my Z is something you might consider - while I had them out, I took them apart (just a couple screws and bolts, very easy). Open it up so that you have access to the glare guard - the cup that sits in front of the bulb. This blocks forward projection of the light, and instead bounces it onto the reflector to be spread very wide (but not far forward) in a fog beam pattern. I used pliers to physically break the guard off the housing, so that instead of a wide, shallow fog pattern, I had a forward-projecting driving beam. I also swapped the 35w OEM bulbs for 55w higher-output superwhite bulbs (this increase in power consumption is not enough to cause any risk to the wiring or fusing, by the way - it worked for years for me). Then put them back together and reinstall them - you'll find a drastically improved light pattern for night driving, and they're still low enough to the road to cut under most fog. Especially since I always felt that the Z headlights were pretty pathetic for output (at least until I installed HID lighting), this was a great mod to make to the car.

Posted on Sep 04, 2008

  • 65 Answers

SOURCE: how to replace bulb for fog on the front .

You can access it from behind.You have to remove splash shield and go from the underside.

Posted on Nov 29, 2008

  • 1 Answer

SOURCE: how to change fog light bulb on 2004 jeep grand cherokee

There's a small space behind inside fender. You can get your hand in there to grab and twist the back of the bulb to release it. You need a flashlight.

Posted on Mar 08, 2009

  • 1 Answer

SOURCE: Changing bulbs in fog lights

Hi this is a bit of a hair raiser, first of all you need to turn the wheel all the way into the motor, left or right depending .
The plastic cover underneath is only held on by some screws and retainers take these out, the cover will be loose but won't come out, gently pry it away from the fender, reach behind and unscrew the bulb housing. Be warned there are two or three different bulbs on the market take yours out before heading off to your local spare parts dealer, it might save you the time of having to go again.
hope this helped
regards Warren

Posted on May 30, 2009

c17hydro
  • 2984 Answers

SOURCE: how to change fog lights bulbs on my 2005 honda

548ae69.gif

  1. Remove the fog light mounting screw.
  2. Disconnect the connector from the fog light.
  3. Turn the socket about 45° counterclockwise and remove it from the housing.
  4. Remove the bulb from the socket.
To Install:
  1. Install the bulb in the socket without touching the glass with bare hands.
  2. Turn the socket about 45° clockwise to install it.
  3. Connect the connector to the fog light.
  4. Install the fog light mounting screw.

Posted on Jul 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Iv got isuzu kb300 automatic there is a check trans light that flashes on a cluster what might be the problem oil is enough and new


I suggest you begin by learning the exact function of the light in the vehicle handbook. If the handbook says the light is important it is almost certainly going to need attention from dedicated diagnostic equipment to locate the problem.

Apr 19, 2016 | Isuzu Cars & Trucks

2 Answers

My isuzu kb300 2005model gives white smoke and sometimes it cant accelerate and engin light comes on


KB
Welcome to the USA Fixya.com forum!
we don't have KB here. sorry.
History.(1 line, all bad)
2005 - Isuzu dealers in the United States have only one model, the Ascender SUV,
and guess what?, it's a rebadged GM car here, no more cars here, real isuzu.
KB are in Africa, Australia and in EUROPE not here in USA. so no books here to cover it.
nor is it covered here, at our great ,Mitchells online.

The KB300 is a 2.999 liter diesel, some are TDI. (most?)
and is called the 4JJ1-TC. (t= turbo)
That is direct injected, (means check turbo , and scan it first) after checking fuses.
The Check engine light on, same deal.
Check filters. for fuel and air.
2004 the D-max , family , introduced the DDI-ITeq common rail diesel engine.

So next time post your country.
And all symptoms.
power loss?
smoke?
Noises?
warning lamps.
etc.

Feb 27, 2016 | Isuzu Cars & Trucks

1 Answer

How do I replace fog light on 2002 isuzu sport


bulb or whole thing
we cant guess the symptoms
not ever.

Mar 08, 2015 | 2002 Isuzu Rodeo Sport

2 Answers

Isuzu kb300 4jh1 not accelerating and producing white smoke


White smoke can also indicate you have a head gasket leak of coolant into a combustion chamber.

Dec 18, 2014 | Isuzu Cars & Trucks

1 Answer

Isuzu kb300 having airlock every time


please say what is air lock,
was this a guess?
or a test that failed, what?

Jul 14, 2014 | Isuzu Pickup Cars & Trucks

1 Answer

No power and losing oil on my 2004 isuzu kb300


check that the rings were installed correctly as they can only be fitted in one direction otherwise excessive oil consumption will result. Check float level or fuel settings for the slow acceleration on slope power problems .

Apr 20, 2014 | 2004 Isuzu Rodeo

1 Answer

How hard is it to change a fog light bulb on a 2005 Subaru Forester? Can anyone do it?


Front Fog Light Assembly

REMOVAL


  1. Disconnect the ground cable from battery.
105919447



  1. Remove the two clips and lower mudguard on side that bulb is being changed.
  2. Disconnect the harness connector from bulb on back of fog lamp.
105919448




Front Fog Light Bulb

REMOVAL


1. Locate back cover on fog lamp assembly where bulb is located inside.

105919462



  1. Remove the back cover.
105919463



  1. Remove the spring retainer, and then detach the fog light bulb.
  2. DO NOT TOUCH HALOGEN BULB!! Oils from skin will cause bulb to explode during operation.

Jul 27, 2011 | Subaru Forester Cars & Trucks

1 Answer

HOW DO YOU CHANGE THE BULBS OF THE FOG LIGHTS?


The fog lights on most vehicles sit directly underneath the headlight bulbs. The ballast and wiring work just like the headlights, so changing them takes not much time. The procedure to change the fog light is as follows:-- 1) Open the hood and reach down underneath the headlights to unplug the electrical plug from the fog light assembly. Squeeze the top of the release tab and pull the connection off the bulb's ballast. 2)Turn the fog light counterclockwise to remove it from the fog light housing. 3)Install the new fog light bulb.Then connect electrical plugs properly. 4) Test the fog lights by turning it ON. Thanks. you can rate this solution and show your appreciation.

May 20, 2010 | 2002 GMC Yukon XL

1 Answer

How do u change a bulb in the fog lights on a


The fog lights on most vehicles sit directly underneath the headlight bulbs. The ballast and wiring work just like the headlights, so changing them takes not much time. The procedure to change the fog light is as follows:-- 1) Open the hood and reach down underneath the headlights to unplug the electrical plug from the fog light assembly. Squeeze the top of the release tab and pull the connection off the bulb's ballast. 2)Turn the fog light counterclockwise to remove it from the fog light housing. 3)Install the new fog light bulb.Then connect electrical plugs properly. 4) Test the fog lights by turning it ON. Thanks. you can rate this solution and show your appreciation.

May 20, 2010 | 2003 Ford Focus

1 Answer

How to change fog lights bulbs on my 2005 honda


548ae69.gif
  1. Remove the fog light mounting screw.
  2. Disconnect the connector from the fog light.
  3. Turn the socket about 45° counterclockwise and remove it from the housing.
  4. Remove the bulb from the socket.
To Install:
  1. Install the bulb in the socket without touching the glass with bare hands.
  2. Turn the socket about 45° clockwise to install it.
  3. Connect the connector to the fog light.
  4. Install the fog light mounting screw.

Jul 14, 2009 | 2005 Honda Odyssey

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...