Question about 2004 Ford F150

2 Answers

Windows do not work

All of my windows will not go down. its like the master control is messed up. the driver side door locks don't work either. the door lock works on passenger side. also when I open the driver side door it does not shut off radio or and dome light does not come on. it does on passenger side.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 5,341 Answers

It does sound like the driver's master switch, but possibly a broken wire in the driver's door. You could try a used master switch to see if that was it (before spending money on a new switch that may or may not help).

Posted on Jul 24, 2013

Ad

Is the battery failing,if so it will, as you said
mess with the GEM Module & it's relays &
give you just what your getting.
You may have a bad door switch as well a battery

Posted on Jul 24, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

SOURCE: 92 F150 power window and locks

try taking apart and cleanig all contacts first. make sure you are getting power to switch. Sounds more switches are going bad. They usually last about 5 to 7 years before they start going out.

Posted on Jun 11, 2008

  • 12 Answers

SOURCE: My 2001 ford windstar passenger door locks and

have you checked the locking mechisnium ithey can be faulty

Posted on Mar 23, 2010

sscullys
  • 984 Answers

SOURCE: Driver's side window, door lock and side mirror

Take a look for a corroded splice in teh driver's side door sill. There are 2 places, 1st is up by the A pillar, this is a blue w/ white stripe wire.
c4f83df.jpg

The other ( that seems to be on SuperCabs ) is a purple splice by the c pillar
9b0b43a.jpg

the splice is 2 wires in on one side, and a single wire on the other. The splice is covered is something that resembles hockey tape, and holds water, if it gets in the door sill.

Posted on Sep 11, 2010

SOURCE: my power windows and power

You need to get a wiring diagram when ever you have
any electrical issues

Study that before you even look for a fuse

You have to have an understanding of the circuit your
about to work on, or your wasting your time.

A local repair shop with Alldata or similar system, may
print what you need

Posted on Jul 13, 2011

sscullys
  • 984 Answers

SOURCE: My 2006 F-150 drivers side

With the list you have, I would think broken ground wire in the rubber boot from the A-pillar to the door on the driver's side.
I have seen this one a few times ( not chronic but happens ).

It is a black wire in the door to a-pillar harness. SWAG at why the window worked when open part way, the wire touched at that one time, and pulled back apart again.

Example picture of a broken wire
sscullys_216.jpg

Posted on Sep 22, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't operate electric window on driver's side door


The door panel will have to come off. check for a bad motor or wiring to motor, or a bad drivers side switch. check the fuses first! and is the drivers side window locked on drivers side, just push the unlock window from the master controls on drivers side to see if it works. on my car, the drivers side window would not work. I accidentally hit the window lock with my arm. God-Bless!

Jan 29, 2015 | Cars & Trucks

2 Answers

Hyundai ix35 2012 window lock stuck. passenger window half down and cant get it to move up or down


Before you replace anything, inspect the connector pins in both the driver's door switch and the passenger door switch. If you don't find any problem with these connector pins, replace the driver's door control switch.

Sep 12, 2012 | 2011 Hyundai ix35 2.0

1 Answer

Power windows not working


1 does the led's light up on the master window switch [drivers side] 2 when you rocker the drivers side down can you hear a audio click down under the steering wheel. the i/p fuse panel is down there where you rest your left foot.3 power is from battery saver relay to master ins. relay to one touch window relay. this is the one you should hear click. the back side of this fuse panel calls out the locations down there. the owners manule also helps some.4. if you take the interior door cover off remove the screw on extenstion on door lock and one screw under plastic button where you pull the door shut.arm rest support bracket. the rest is held in place with snap in plastic buttons [christmas trees like]. the door latch unlock should slide out of the opening when you slide it froward.there are 4 male/female electrical connections, 2 to the master door switch.one to the power/heated mirror, 1 to power locks. 5. don't unsnap them yet.with a test light you can check for battery voltage. on the master door switch the blue/black tracer wire should be hot[12 volt dc]. at all times. put one end in the backside and the other to a bolt or rivet on the door. the light should come on.next with one end on the blue/black tracer and one on white/black tracer rocker driver side up/down switch, the light should come on.there are only 13 wires on the master window switch 2black wires are ground, 2blue/black tracer[hot] 1 red/blue tracer should be [hot] when you unlock the window lock rocker switch.know the passanger and back seat switches should work. switch it to lock and they should only work from the driver side master switch.the 8 wires left are 2 for each window one up one down.try this with a friend it makes it easyer. good luck doug.

Sep 10, 2012 | 1997 Ford Taurus

1 Answer

Only the driver side window works the passager door window ad both real windows don't work what is the problem?


If the lock out switch is not on, I would check for power and ground at the driver's master switch.

Sep 03, 2012 | 2001 Oldsmobile Aurora

1 Answer

1993 Bighorn Passenger window not working


There could be a lock controller somewhere that is not working.
I don't have a wiring diagram for your truck.

Generally, the power window motors are grounded thru the doors, or the switches provide ground. In your case the motors are probably grounded thru the doors.
The master switch "overrides" the door switch so you have extra wires that do the same thing. The E wire probably gives the door switch power and the A and C are up and down. The B and D are override circuits from the master that bypass the door switch.
Sometimes the motor is grounded thru the switch then thru the door.

Jun 28, 2012 | Isuzu Trooper Cars & Trucks

1 Answer

Power windows locks and mirrors


Sounds like the master switch is not plugged in properly, this is the switch in the driver's door.

Jun 07, 2012 | Cars & Trucks

1 Answer

Doors wont lock. Windows won't work. Car thinks the door is locked because when I open the hood alarm goes off. Security light is flashing when doors are closed. Locks don't engage when driving...


Window fuse's and relay's may be up under driver or passenger side dash or behind glove box, under the hood and even under the seats, and finally on the ends of the dash. All passenger power windows and locks are controlled thru and get power from the master control switch on the drivers door. Could be a broken wire in the rubber boot going from the door to the body. You will have to eliminate each till you find the culprit. Check that all switches return to neutral when released. It could also be the body control module.

Aug 28, 2011 | 2003 Volkswagen Jetta TDI

1 Answer

Hi, the master control from the driver's side is not working, will the passenger's work if I swap them?


{: ) -- I think you are referring to the door lock/window master control switch. You cannot swap them, since the passenger door switch uses different connector and configurations compared to the driver door switch.

Jun 07, 2011 | 2006 Chevrolet Trailblazer

1 Answer

The driver side master control buttons dont work?i cant roll down my window, ajust my mirror or lock / unlock any doors? my passanger side and both back seat passangers door controls work. MY QUESTION IS...


The little metal contacts inside the switch havecorroded. I have torn apart the switches and sanded the contacts severaltimes and they always worked afterward. Just be careful and watch what you are doing. They are a little tricky but if you mess up then the switch at the wrecking yard will cost you all of 5.00 or ten bucks. Do not buy it new. You will loose an arm. I have never messed up though. Ilike saving my money to much. Good Luck, I hope this helped, The Raz

Apr 16, 2010 | 2002 Pontiac Bonneville

4 Answers

Problems with door locks and window


page 3-39 in owners manual. automatic door locks. do the steps and change too lock 2. this worked on my 2006 colorado crew cab. good luck

Apr 05, 2009 | 2005 Chevrolet Colorado

Not finding what you are looking for?
2004 Ford F150 Logo

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...