Question about Cars & Trucks
Three days before I brought it to the dealership I had alternator, spark plugs, spark plug wires and a coil put in and it was just fine. It sounded like this when my husband came home from picking it up.
A hum is a very vague request a hum can be from tires ,engine ,driveshafts rear or front axles etc advise to bring back to dealer who preformed work on vehicle and advise them that the hum wasnt their prior to repair work also the work should be under warranty
Posted on Jul 24, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
the blendor actuators strip out the gear inside the actuator cases on these all the time. replace the actuator.
Posted on Mar 19, 2009
they make a spark plug repair kit you can do your self in your drive way, Napa Auto Parts has it...
Posted on Aug 06, 2009
For the 3.8L:
Ignition Coil Pack Connections:
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com.
Posted on Mar 18, 2010
Number three cylinder is miss fire,it does not mean it is the coil,although it could be,remove the coil,and boot,and spark plug,inspect them to see if the plug,or boot look bad,replace the spark plug,and if the boot is burned or distorted,replace it,a fuel injector can cause a miss fire also,but change the spark plug and see if this solves the problem,if not replace the coil,if it is a dead miss,then the coil might be bad,as for the water in the fuel ,the cap is missing,,and 5 dollars worth of HEET will not hurt,also,fuel from the fuel station,can have water in it.It happens a lot.
Posted on Apr 03, 2010
I own a 2001 Windstar. Your noisy brake problem could be nothing more that new brakes being broken in. I have done many brake jobs on my 2001 Windstar as well as other vehicles that I have owned. To prevent this problem from occuring, I apply a thin film of Disc Brake Quieter directly to each brake pad during the installation process. This quiets the brakes during the break in period. I hope this helps.
Posted on Jan 09, 2011
Tips for a great answer:
Oct 03, 2015 | Ford Cars & Trucks
Feb 20, 2011 | Ford Windstar Cars & Trucks
Jan 12, 2011 | 2003 Ford Windstar
Jan 09, 2011 | 2003 Ford Windstar
Welcome to FIxYa.com
Yes there is
Fuel related- speed sensor and Seat to latch recall
Thank you for using FixYa.com
Regards, Lee Davidian
Jan 02, 2011 | Ford Windstar Cars & Trucks
Jan 02, 2011 | 1998 Ford Windstar
Dec 17, 2010 | Ford Windstar Cars & Trucks
Dec 07, 2010 | 1999 Isuzu Rodeo
Apr 28, 2010 | 1996 Ford Windstar
Sep 03, 2009 | 2000 Ford Expedition
81 people viewed this question
Usually answered in minutes!