Question about Cars & Trucks

Open Question

Duramax p0341 code - Cars & Trucks

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code PO341 came up on scanner how do I test the sensor want to be sure its not the wires


his P0341 code basically means that the powertrain control module (PCM) detected a problem with the camshaft signal.

Read more at: http://www.obd-codes.com/p0341
Copyright OBD-Codes.com

Apr 14, 2016 | Cars & Trucks

1 Answer

I own a 1998 Chevy Lumina, took it to Advance Auto. I know what one code is what does code P0341 mean and how can it be fixed?


Hi, Im AL the owner of Big As Auto Repair.

P0341 is a code for Camshaft Position Sensor Circuit. The first thing you need to do sense its a circuit code, is to change the Camshaft Position Sensor. I don't know what engine you have, but if its the 3.4 engine the sensor will be directly under the Power Steering Pump. Remove the pump and replace the sensor, clear the codes and hopefully the sensor does the fix. If not it could be in the wiring or engine controller. Hope this helps and please visit my auto-repair-website and give me a thumbs up. http://www.bigasautorepair.com/

Jan 24, 2016 | Cars & Trucks

1 Answer

ERROR CODE P0341, P0609, P0571


EOBD Codes:
  • P0341 - Cam Position Sensor signal error- check wiring.connector,bolted securely. Or sensor itself damaged.
  • P0571 - brake switch wiring or ECM problem
  • P0609 - VSS-vehicle speed sensor output -ECM problem if wiring is OK.

Apr 04, 2014 | 2005 Peugeot 307 1.4

1 Answer

I am getting codes P0135 and P0341 on my 02 VW Jetta, the car wont run, what would cause this?


code p0135 refers to a HO2S sensor 1 bank 1 heater control ---circuit malfunction- ===causes ---fuse --wiring and sensor
the other code p0341 would point to your problem It refers to camshaft position sensor(CMP) sensor A bank 1 --range / performance problem===causes --insecure sensor /rotor---air gap---wiring - CMP sensor
check that the rotor is fixed properly , that there is no dirt in the air gap and adjust the air gap. If it still plays up replace the sensor.

Feb 26, 2014 | Cars & Trucks

1 Answer

Codes P0131, P0137, P0341, and B1218. Code P0131 and P0137 were listed twice. This is for a 2000 chevy venture. I already spent $400. 2 years ago for emissions


HI ghosthunter6 codes P0131&P0137&P0341 indicative of having electrical short .
P0131 Front Heated Oxygen Sensor Bank 1 harness is open or shorted .
P0137 Rear Heated Oxygen Sensor Bank 1 harness is open or shorted .
P0341 Camshaft position sensor harness or connectors (The sensor circuit is open or shorted) .
code B1218 horn relay coil circuit short to voltage battery .
IT could be cousin problem with other sensors .
First replace horn relay and clear E C M codes
IF problem and codes P0131&P0137 come back you need o2 sensors .put I don't thank so.
YOU MUST REPLACE HORN RELAY .OK

good luck


Jul 27, 2011 | Chevrolet Venture Cars & Trucks

1 Answer

1998 Saturn problem code P0341


P0341 Camshaft Position Sensor Circuit Range/Performance.

most likely the sensor is bad

Jan 06, 2010 | 1998 Saturn SL

3 Answers

1999 Chevrolet Malibu Code PO122 problem fault code in the emission test and P0341 fault code in emssion test.


po341 is camshaft position sensor A bank 1 ckt range/perf and po122 istps/pedal position sensor A curcuit low input this is throttle position switch on side of throttle body!

Jun 05, 2009 | 1999 Chevrolet Malibu

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...