Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
hello, 560 sel,,,model 126.039 engine with v-8,engine number 117.968 ke is is fuel injection system.ref. book;technical data mb,ty
Posted on Apr 29, 2009
SOURCE: timing marks
this is an easy one to time. the timing mark for the crank is 0 degrees-do not attempt to tum crank if cam timing is out. there is no distributor on this engine-it is advanced with your intake camshaft. The intake camshaft is the only tricky part to time. Be very careful because at 2500 rpm this cam actually moves forward via cam advance solenoid. It will hit your crank if not timed properly! so with your crank at o degrees-camshafts out of head if you need to turn engine to line up crank-on the exhaust cam(your left)behind the gear(on flange) there will be a hole big enough to put a small punch in that will line up with the top of the deck surface on the outer side(to the left). Now on your intake cam(your right) it will be just the opposite. the hole on the back side of the gear flange will line up on the right with the to p the deck surface. once in line hold intake cam and turn the gear(advancer) all the way to the right)-very important. You will have to start with you intake(put chain on) then line up your exhaust and install timing chain tensioner. always turn engine 360 degrees and recheck before you proceed. At least your at top dead center and you can visually see the lobes on both cams mostly straight up. hope I have been helpful.
Posted on Jun 13, 2009
SOURCE: 1984 Mercedes-Benz 500 SEL
In the driver's side trunk along the wheel well and behind the wheel well cover you will find the sunroof motor. There is a plastic knob that can be turned to close/open the roof manually. The socket tool is part of the original toolkit that came with the car, but otherwise, you can locate one that will fit. Don't use pliers as the plastic easily breaks. Meanwhile, have you looked at the fuse or toggled the switch hard to work? If the motor works, but doesn't move there is an adjutment on the motor's clutch that can be tightened. Hope this helps.
Posted on Feb 21, 2010
A Mercedes benz dealer in parts and service should be able to order a manel for you if not,try Auto Zone they have the chelton books that show how to for Mercedes.
Posted on Jul 26, 2010
Tips for a great answer:
Mar 01, 2015 | 1988 Mercedes-Benz S-Class
Nov 19, 2014 | 1988 Mercedes-Benz 300
Dec 24, 2010 | 1988 Mercedes-Benz 300
Nov 25, 2010 | 1989 Mercedes-Benz 300-Class
Aug 12, 2010 | 1991 Mercedes-Benz 420
Jun 14, 2010 | 1989 Mercedes-Benz 300-Class
May 09, 2010 | 1988 Mercedes-Benz 300
Mar 16, 2010 | 1991 Mercedes-Benz 300 Diesel
May 16, 2009 | 1985 Mercedes-Benz 300
76 people viewed this question
Usually answered in minutes!