Honda accord 95 model, just cut out while driving and the ignition lights went out and the dials all went to zero. When I got it home I realized the ignition lights won't come on untill you turn the key passed the point they usually come on and to the position just before the starter should engage, then all the lights come on as normal and I can hear the fuel pump aswell But the when you turn the last bit the engine will start but when you let go of the key it cuts out. I have no idea what the problem is and am looking for some help, any would be appreciated. Thanks

SOURCE: 1997 chevy 2500 4x4 stumbles

Fuel pump is most likely the cause. Probably just barely making the required pressure to start. Needs to maintain 60-66 psi while cranking to start.

SOURCE: expert van 2.0 hdi engine runs lovely until you

Hi You need to get the ecu checked for fault codes if there are none it is possibly low fuel pressure you should allso check this have you changed the fuel filter or opened any fuel lines this could introduce air
which will lower fuel pressure.Good luck Chris.

SOURCE: Trouble starting

It is probably the ECU / ECM. I had the same problem. Replaced everything and that last. Of course thats what it was. You can pick one up on Ebay- the company name is ECUEXCHANGE. They offer a warranty. The only place I found and they had the best price. Though they are rebuilds. Good Luck!

SOURCE: where is the starter relay on a 94 Honda Accord

Yes, it sounds like your solenoid is bad and staying engaged against the flywheel, you could do an amperage draw and a voltage drop test to find out for sure, but you will need an DVOM and a amp clamp. Or you could take it into an auto parts store and they will test it for free. Hope this helps.

SOURCE: engine wont start help please!!!!!

you have tripped the inertia switch, (there to cut off the fuel pump in the event of a collision), you need to reset the switch by simply pressing it back in.