Question about Cars & Trucks

Open Question

2008 hyundai elantra engine diagram

The belt is making a lot of noise when the car is running?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Ajkill
  • 2035 Answers

SOURCE: Location of camshaft position sensor on a 2001 Hyundai Elantra wL

The camshaft position sensor is located on the engine near the timing belt cover and under the upper radiator hose.

Posted on Dec 26, 2008

Ad
  • 1 Answer

SOURCE: location of oil filter on a 2008 hyundai elantra

It is located under the alternator. If you are looking down at the engine, it is to the far left. If you are under the car it is to the far right before the oil pan.

Posted on Feb 09, 2009

  • 80 Answers

SOURCE: need power window diagram for 2000 hyundai elantra

is this what your looking for??
Front Door Glass:
36c72f3.jpg

Posted on Apr 25, 2009

ghost4548
  • 776 Answers

SOURCE: 2008 Hyundai i30. 2.0 litre petrol.

Interesting problem.. since not US spec. Is there a 'remote keyless (fob)' programmed for this vehicle? That's the only way to DE-arm the immobilizer (anti-theft) feature (based on US specs). Unless you have this key fob (keyless entry remote... which must also be programmed for this vehicle), the only other way is wait 5 minutes with the existing key in the ignition, then it should start (US specs). You will still need to have an 'ACTIVE' keyless remote programmed for this vehicle... otherwise, you'll continue to run into this problem.

Posted on Jun 20, 2009

  • 38 Answers

SOURCE: How to replace serpentine belts 99' Hyundai Elantra.

you might need to get a prybar or something such long, and try to pry it off the belt, it should go easy right away. It is a spring-inside assembly, and won't brake. There also could be a 3/4 hole in it, look from a side. It's for middle size ratched, it can be used to loosen the tensioner from serp. belt.

Posted on Jul 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My elantra 2013 has developed a clicking noise under the hood.


It could be as simple as a frayed belt hitting as the engine is turning.

First visually inspect the belt.

Then get someone to assist you and rev the car while you listen for the noise under the hood.

A long screwdriver is sometimes helpful if you touch parts of the engine and components while the engine is running (carefully) to see if you can identify where the ticking is coming from.

If it's a valve you ought to be able to hear/feel it through the long screwdriver when you touch the engine valve cover.

make sure engine fluids are properly filled.

also, sometimes it can be a fan component that ticks even after the car shuts off.

Feb 21, 2015 | 2012 Hyundai Elantra

1 Answer

Fuse box diagram for a 2008 hyundai elantra


On this website you find fuse box description for Hyundai Elantra (2008 - 2009)

http://www.autogenius.info/hyundai-elantra-2008-2009-fuse-box-diagram

Apr 19, 2014 | 2008 Hyundai Elantra

1 Answer

I drive a 2006 hyundai elantra with around 30,000 miles on it and lately there has been a rattling noise coming from the engine bay. It happens around 2000 rpm and only in drive. I narrowed the noise down...


This sounds like a bad pulley, maybe bearings in the waterpump or alternator, you will need to remove belt and spin each pulley to locate and also check for a loose pulley.

Dec 08, 2010 | 2006 Hyundai Elantra

1 Answer

Recently replaced all belts in my 2001now get squealing noise


belts in right pulley position? and air can cause squeeling

Jun 08, 2010 | 2001 Hyundai Elantra

2 Answers

Hyundai 2001 engine light stays on


I have a 2001 Elantra, and the Check Engine light keeps coming on. Replaced the o2 sensor, 3 times, and flex pipe was replaced. The engine light came back on...original fault code was P0133............any ideas??

Sep 23, 2009 | 2001 Hyundai Elantra

1 Answer

2003 Elantra does not start. New battery.


Sounds like you have a bad or burned contact in the ignition switch.

May 12, 2009 | Hyundai Motor 2003 Elantra

1 Answer

How to replace serpentine belts 99' Hyundai Elantra.


you might need to get a prybar or something such long, and try to pry it off the belt, it should go easy right away. It is a spring-inside assembly, and won't brake. There also could be a 3/4 hole in it, look from a side. It's for middle size ratched, it can be used to loosen the tensioner from serp. belt.

Mar 18, 2009 | Hyundai Motor 1999 Elantra

1 Answer

Location of oil filter on a 2008 hyundai elantra


It is located under the alternator. If you are looking down at the engine, it is to the far left. If you are under the car it is to the far right before the oil pan.

Nov 09, 2008 | 2008 Hyundai Elantra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...