Question about Cars & Trucks
Need to find engine number where is it
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
if your looking for the engine details lift the hood of the car and there will be a sticker on the hood to the right about eye level it will have the details of the engine it should say something like 2.4L and then give details about emissions and the car......................... I hope this helps
Posted on Jul 20, 2009
The mechanic is most likely correct the vehicles have double intake as well as double exhaust valves which allows the motor to retain most of its power even if one of the valves burns out. However if an intake valve burns or fails there usually is a popping sound or misfire upon acceleration in this case you most likely have a burnt or worn exhaust valve, you have about six months to a year before the truck starts really misbehaving. Just address the side of the engine or head that has the burnt valve don't let them talk you into doing both cylinder heads you may go 250,000 to 300,00 miles before having to do a full valve job on the truck. These motors are fairly tough so just do the one head not both when the time comes.
Posted on Oct 29, 2009
1987 Toyota Truck Van 4WD 2.2L FI 4cyl
The Fuel Filter is located front seating area, center, under engine cover, passenger side of engine compartment, near firewall, mounted in fuel line.
Hope helps with this (rated this) Good luck.
Posted on Jan 11, 2010
undo all covers to allow acess to shaft undo all bolts holding flex coupler 6mm allen key + 12mm spanner undo the gaurd the shaft goes through remove all bolts, lever rear coupler apart, push rear of shaft towards passenger side of car, slide shaft out, refitt in opposite order, certain models toyota tells you that whole shaft required, for about 3,000 dollars . after market couplers available from hardy spicer, shaft will have to be removed first to know if 12mm or 14mm dowel into end of shaft
hope this helps
Posted on Sep 04, 2010
Tips for a great answer:
Jul 04, 2017 | Cars & Trucks
Dec 22, 2016 | GMC Cars & Trucks
Jun 15, 2016 | Peugeot 307 Cars & Trucks
Jan 13, 2015 | Cars & Trucks
Jan 31, 2014 | Nissan Xterra Cars & Trucks
Jun 15, 2011 | Chevrolet Chevy Cars & Trucks
Nov 12, 2010 | 2003 Toyota Sequoia
May 20, 2010 | 1983 Honda Civic
Aug 25, 2009 | Suzuki XL7 Cars & Trucks
Aug 16, 2009 | 1985 Toyota Corolla 2 Door
277 people viewed this question
Usually answered in minutes!