Question about Toyota Corolla

1 Answer

Toyota connected the front dome cable in opposite direction

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Toyota Master
  • 12,223 Answers

Go to www.automecanico.com translate this website with your browser and fix it.
God bless you

Posted on Jul 23, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996. How is battery disconnected and reconnected?


unbolt the battery cable ends and remove from the battery terminals install in reverse. most recommend disconnecting the negative first then the positive one then reconnect in opposite direction.

Aug 31, 2015 | Toyota Celica Cars & Trucks

1 Answer

Removal of front headlight housings on 96 camry


Instructions

Shift the Camry's transmission into park and rotate the ignition to the "OFF" position. Apply the parking brake.

Insert the tip of a small flat-head screwdriver between the dome light cover and the dome light housing.

Pry the dome light cover away from the dome light housing until it separates and pops loose.

Jul 24, 2012 | Toyota Camry Cars & Trucks

1 Answer

How to replace dome light in toyota highlander


On the side opposite the dome switch, find a small notch between the dome lens and the dome assembly frame.
Using a wide flathead screwdriver, pry the lens at the notch, pivoting carefully to avoid gouging the plastic surfaces until the lens snaps out.
Replace the bulb and snap the lens back.

Nov 26, 2011 | 2001 Toyota Highlander

1 Answer

Dome light will not turn on when door is opened


Do any of the doors trigger the light when you have the switch set to 'door'?....If not then check the fuse in the box under the bonnet (hood) marked dome on the directory....If that fails check to see if power is going to the fuse....Another reason they will fail to work is contamination on the door switches....Remove one at a time....To do that lift the rubber cover carefully so as not to damage them and then remove the machine screw and carefully remove the switch, take a short length of electrical cable and wind it around the cable going to the switch where you can make good contact and then ground the attached cable to see if the dome light comes on....The power supply is direct to the light and the ground is what is switched....I presume that the dome comes on when the switch is selected....If not take off the lens and then remove the lamp unit retaining machine screws and check power is going to it....Once that is confirmed try the switch as it may be defective....If that is the problem, replace it....The circuit is very simple and cannot be a large problem....Best regards Johngee10

Oct 16, 2010 | 2003 Toyota Camry

2 Answers

My inside light isn't working which fuse do I replace


change the bulb of your inside light, it is connected directly to the battery, it is not included in the fuse box..

Aug 17, 2010 | 2004 Toyota Corolla

1 Answer

What is the dome fuse for?


Check the manuel for the fuse size. Also to keep the fuse from going out when you put it in unhook batt cables then replace fuse then replace batt. cables

Apr 27, 2010 | 1991 Toyota Camry

1 Answer

Trying to locate back up light switch on toyota camry 2001


The back up light switch is built into the multi-function switch. It is located on the front of the trans axle. The shift cable is connected directly to it. There is no 'seperate' reverse switch for the back-up lights.

Oct 17, 2009 | 2001 Toyota Camry

1 Answer

1990 Toyota Camry has electical short


with the aid of a test light disconnect the negative terminal to the battery and connect one end of the test light to the battery and the other end to the terminal cable if its lit there is a draw begin by pulling 1 fuse at a time until the light goes out and that's the draw most likely a glove-box switch not making full contact or a trunk switch even the dome light adjust the switch as necessary either try a shim or possibly bend the fixture forwards or remove the bulb all together if you desire

Sep 23, 2009 | 1990 Toyota Camry

2 Answers

Can not turn the key .on my 1996 toyota camry


Look for a certified diagnostic centre so your car can be properly checked. I suspect that it has a security code issue. It can only be corrected that way. Try it out and get back to me. +2348023080045

Mar 17, 2009 | 1996 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...