Question about Cars & Trucks

1 Answer

07 passat code p0642 related to other codes

Codes p0642, p2014, p0106, p0089,can they be related to sensor voltage?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 42,663 Answers

Code p0642 refers to ECM-knock control defective or sensor reference voltage A circuit low or system voltage- malfunction===causes for ecm is ECM--- for voltage A wiring is short to positive --- for system voltage ---wiring--poor connection--battery---alternator
code p2014 refers to intake manifold air control actuator position sensor/ switch bank 1 circuit malfunction=== causes --wiring --intake manifold air control actuator position sensor/switch
code p0106 refers to manifold absolute pressure MAP sensor/barometric pressure sensor-range/performance problem===causes--intake /exhaust leak--wiring--MAP sensor---Baro sensor.
code p0089 refers to fuel pressure regulator --performance problem===causes--fuel pressure regulator--mechanical fault. I would suggest that you have the battery load tested and the alternator checked for correct output as it may be the common reason for the codes .P0089 will not be electrical as it being a mechanical fault then the regulator needs replacing

Posted on Jul 23, 2013

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 218 Answers

SOURCE: I have a 2008 VW Passat. When the engine light came on I stopped at Autozone and they gave me the following codes: P0089, P0642, P2004. Anyone know what they mean?

CODE 89 IS FUEL PRESSURE REGULATOR 1 PERFORMANCE.CODE 642 SENSOR REFERANCE VOLTAGE CIRCUIT "A" LOW.AND CODE 2004 IS ITAKE MANIFOLD RUNNER CONTROL STUCK OPEN.CK FOR BAD OR MISSING VACUUM LINES.IS IT STILL UNDER WARRANTY

Posted on May 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I trouble with P0106, P0442, P0455


code p 0106 refers to manifold absolute pressure(MAP) sensor / barometric pressure (BARO) sensor---range /performance problem===causes --intake exhaust leak---wiring---MAP sensor---BARO sensor
code p 442 refers to evaporative emission(EVAP) system--small leak detected===causes --hose connections ---intake leak---EVAP cannister purge valve
it also refers to EVAP system ---large leak detected ---cap loose/ off ===causes --mechanical fault , hose connection EVAP pressure sensor
code p 0455 refers to EVAP system --large leak detected ===causes same as for p 0442 causes

Jul 07, 2016 | Plymouth Grand Voyager Cars & Trucks

1 Answer

How to fix p0089 obd code on mitsubishi strada


What is the fuel suction valve? fuel pump? You never stated a year. Did you replace the fuel filter? P0089 is generic code for a fuel problem. What was the fuel pressure? Did the pressure hold for 10+ minutes? What are the symptoms?

Nov 28, 2015 | Mitsubishi Cars & Trucks

1 Answer

How to fix fault code p0238 on a 2004 vw passat


P0106 = Map sensor, it is out of range.
P0172 = Fuel Trim it is too rich



Go check out http://volkswagen-polo-highline.blogspot.com

Feb 11, 2013 | 2008 Volkswagen Passat Sedan

1 Answer

Engine codes p0642 and p0451


P0451 Evaporative Emission Control System Pressure Sensor Range/Performance

P0642 Engine Control Module (ECM) Knock Control -Defective
i think the most likely cause is the anti knock sensor ,this is mainly fitted to american models rather than europeon models owing to the europeon parliament disallowing the high level of biological produced fuel used in america,the answer o this i think is to see the post i have added to this questions answer.

Nov 20, 2012 | Cars & Trucks

1 Answer

Crank but does not start (Error code P0642)


p0642 = sensor reference voltage a circuit low voltage
p0300 = means random misfire
check firing order connections and must be in place.
check also cables especially the high tension cable and coils for required resistance.
primary = 1.0 to 0.5 ohms
secondary = 900 to 11,000 ohms (as requires per model)

Aug 15, 2012 | Infiniti Cars & Trucks

1 Answer

P0106 map sensor code on tdi


02 jetta map sensor code p0106 and faulty boost sensor code p0238

Sep 28, 2009 | 2002 Volkswagen Jetta TDI

1 Answer

I have a 2008 VW Passat. When the engine light came on I stopped at Autozone and they gave me the following codes: P0089, P0642, P2004. Anyone know what they mean?


CODE 89 IS FUEL PRESSURE REGULATOR 1 PERFORMANCE.CODE 642 SENSOR REFERANCE VOLTAGE CIRCUIT "A" LOW.AND CODE 2004 IS ITAKE MANIFOLD RUNNER CONTROL STUCK OPEN.CK FOR BAD OR MISSING VACUUM LINES.IS IT STILL UNDER WARRANTY

May 05, 2009 | 2008 Volkswagen Passat Sedan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

337 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...