Question about Cars & Trucks
I have a Nissan tiida want to know if the clutch is hydraulic or clutch cable
Find the clutch throw out arm and see if there is a cylinder there or a cable end there. Or look at the fire wall at the clutch pedal and see if you have a hydraulic cylinder there or a cable coming out.
Posted on Jul 23, 2013
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
5. If “AIR BAG” warning lamp operates as [as I said before], turn ignition switch “OFF” to reset from Diagnosis mode
1. Turn ignition switch “ON”.
2. After “AIR BAG” warning lamp lights for 7 seconds, [i.e. when it stops running solid and starts flashing] turn ignition switch “OFF” within 1 second. [DO NOT SWITCH IT TO LOCK, SWITCH IT TO ACC]
3. Wait more than 3 seconds.
4. Repeat steps 1 to 3 two times. (Perform 3 times in total.)
5. Turn ignition switch “ON”.
SRS is now in Diagnosis mode.
Try it a few times. If you can't get it to work, have someone else try. If you STILL can't get it to work, check your battery voltage. It might be low.
In diagnosis mode, you're going to hope the light flashes slowly. 2 seconds off, 3 seconds on, and repeats. If your light does this, this means that the computer detected a previous error that hasn't been erased. This is good.
to User mode and to erase the memory of the malfunction.
6. Turn ignition switch “ON”. “AIR BAG” warning lamp operates in
User mode. [it should stay on for 7 seconds, then go off, like normal.]
Posted on May 17, 2009
If you are mean that only when you put on the brakes you feel a vibration from the steering wheel. Then you need to make sure your front end is tight, or the break rotors are warped which is most likely the case but you should also feel a pulsation in the brake pedal two. You can jack up the front tires grab the tire from top to bottom then do the same from side to side you should notice if there is excessive amount of play, or movement, if not you probbaly just have warped brake rotors that you can have machined or replaced.
Posted on Jul 11, 2009
ON A 2000 MAX 6 CYLINDER HAS CLUTCH MASTER CYLINDER AND SLAVE CYLINDER, CHECK FLUID LEVEL AND BLEED CLUTCH SYSTEM AT SLAVE CYLINDER BLEEDER. HAVE NOT HEAR OF CABLE CLUTCH SYSTEM. ONLY HYDO.& LINKAGE. GOOD LUCK
Posted on Nov 05, 2009
The problem is that the slave cylinder is right next to the front head of the engine-heat, heat and more heat!!! I put a piece of aluminum angle to curb the heat and installed a fan to blow right at the slave cylinder-PROBLEM SOLVED!!!
Posted on Dec 04, 2010
Tips for a great answer:
Jan 19, 2018 | Nissan Cars & Trucks
Mar 22, 2017 | Nissan Tiida Cars & Trucks
Jan 16, 2017 | Nissan Tiida Cars & Trucks
Jun 17, 2016 | Nissan Tiida Cars & Trucks
May 04, 2015 | Nissan Tiida Cars & Trucks
Feb 14, 2015 | 2011 Nissan Tiida 1.8
Jan 19, 2015 | 2011 Nissan Tiida 1.8
Jan 27, 2013 | 2007 Nissan Tiida 1.6
Jul 08, 2012 | Nissan Tiida Cars & Trucks
Jul 13, 2011 | Nissan Pulsar Cars & Trucks
207 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: