Question about Cars & Trucks
Yes the will start.However you must RUN the scanner/computer for to see what is really going on with your car.
God bless you
Posted on Jul 23, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hi,welcome to fix ya. remove the clamp on the brake flex line attached to the swing arm and the caliper will pull right off. be sure to turn and push to retract the caliper .And to line the tab on the pad with the slot on the piston.
Posted on Apr 05, 2009
most of the time the disc is bad but when the disc goes bad its the navi unit that causes that to go bad so if you replace just disc will need another one soon after recommend replacing unit or ship to repair facilty for repairs
Posted on May 02, 2009
To reset MAINTENANCE REQUIRED light, turn ignition off, press and hold the SELECT and RESET buttons. Turn ignition on and hold buttons for 10 seconds until indicator resets.
Posted on Sep 06, 2009
The adjustment screws/nuts should be located either on the top of the headlamp assembly,
behind the headlamp assembly, or near the frame rail by the radiator
If you have one adjustment screw, it will control your vertical aim. If you have two adjustment screws, one will control your vertical aim and the other will control your horizontal aim
Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)
If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.
Posted on Sep 30, 2009
Tips for a great answer:
Oct 24, 2013 | 2006 Acura TSX
Aug 02, 2012 | 2004 Chevrolet Tahoe
Dec 27, 2010 | 2006 Acura TSX
May 21, 2010 | 2004 Acura TSX
May 19, 2010 | 2006 Acura TSX
Aug 02, 2008 | 2006 Acura TSX
Jun 27, 2008 | 2004 Acura TSX
27 people viewed this question
Usually answered in minutes!