Question about Dodge Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2004 dodge stratus with 2.4L
The Code P0340 on your Stratus is :
Camshaft Position Sensor Loss signal.
Ok, The first step is check tha condittion on the connector.
For corrosion, bent pins or damaged wires.
If you found that everything is ok.
Replace the Cam Position Sensor.
The Cam Position Sensor, Is common that the Cam fail on this Vehicle and similars of this.
Tha Cam position sensor Is located:
At end of the engine head, driver side. Is attached with 4, 10mm
screw, and the connector at the center of the sensor.
I hope this help on your problem.
Thank you for use fixya...
Posted on Aug 29, 2008
Intake Air Temperature Sensor Circuit Low Input
Sensor signal shorted to chassis ground
Sensor signal shorted to sensor ground circuit
Sensor has an internal failure (it is shorted)
PCM has failed
Your vehicle’s computer system has self-testing capability. When the computer senses that there is a problem with one of the components or sensors it stores the correspondent trouble code(s) in its memory and lights up the "Check Engine" or "Service Engine Soon" light to tell you that there is a problem and you need to diagnosed and repaired it. There are test that need to be performed the find out the cause, if you do not have a good understanding of electricity take it to a professional. The light will stay on until the problem is solved. This can cause problems with other sensor if not corrected.
Posted on Feb 28, 2009
may be the distributor. especially if the production date is b4 may 95 common problem.not much to take a look at it, usually internal damage. good luck!
Posted on May 07, 2010
SOURCE: 1998 dodge stratus trans trouble
Reset the computer, easiest way to do this is disconnect a batter cable for a couple of minutes and then reconnect and check to see if the warning light goes out and stays out or comes back.
If the error returns, it signals an issue. You can take it to the local auto parts store to have then read the code for you, if it is an easy to change sensor, replace it and reset again. If it comes back or it's not a sensor you can change, take it to a transmissions shop for a diagnosis.
Hope this helps.
Posted on Feb 14, 2011
SOURCE: I need to know what
P0572 Cruise Control/Brake Switch A Circuit Low. here is a cause/solution for your problem even though it is for a Chrysler it is the same code and fix. Good Luck Tim
Posted on Apr 30, 2011
Tips for a great answer:
Dec 19, 2011 | 2006 Dodge Stratus
Aug 15, 2011 | 1996 Dodge Stratus
Aug 13, 2011 | 1996 Dodge Stratus
Apr 30, 2011 | 2004 Dodge Stratus
Jul 09, 2010 | 1996 Dodge Stratus
May 07, 2010 | 1995 Dodge Stratus
Dec 22, 2008 | 1998 Dodge Stratus
24 people viewed this question
Usually answered in minutes!