Question about Cars & Trucks

Open Question

Smart pilot x5r wont release

Steering very stiff until smart pilot released from anchor on dash . smart pilot not releasing

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 141 Answers

SOURCE: hood release cable wont release hood latch

Adjust at the pull handle inside the car.

Posted on Jan 09, 2009

Ad
  • 548 Answers

SOURCE: Parking Brake on, Under dash release cable broken

Can you get to any part of the cable? If so, use a pair of pliers to release it until you can replace the cable.

Posted on Jan 25, 2009

  • 1 Answer

SOURCE: trunk release and gas release will not work

did you hit the valet button?

Posted on Jan 26, 2009

  • 1 Answer

SOURCE: TRUNK WONT OPEN WITH TRUNK RELEASE BUTTON ON DASH OR WITH REMOTE

Check for broken wires running from the body to the trunk lid through the rubber boot.When the trunk is closing you can see the kink in the rubber boot.There are 11 wires to supply 1 solenoid so I think Chrysler knew there was problem.

Posted on Sep 04, 2009

  • 1 Answer

SOURCE: stuck hood on 2000 ford 250, latch release won't work

2000 FORD SUPER DUTY 5.4 HOOD STICKS.YOU CAN HAVE AN ASSISTANT PULL THE HOOD CABLE AND EASILY OPEN THE HOOD BUT THE HOOD WILL NOT POP UP ON ITS OWN..ANY ADVISE?

Posted on Nov 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Emergency brake pedal won't release


Hi Johnnie:
Just did this fix on a GM. Should be similar for you.
If you can open the drivers door and put a cushion on the grougd to ease your knees, kneel next to the open door and look up under the dash where the release is located. You may need a flashlight, but the intent is to be able to see while you activate the release lever a few times.
What you will probably see is a sheathed cable. The end of the cable or the sheath anchor (rubber grommet in slot?) will probably be disconnected. The end of the cable has a knob that engages the release lever.
Make sure the vehicle transmission is in park. Use pliers or vice grips to pull the release lever.
First attach cable knob in release lever.
Then secure sheath anchor in slot.
Cheers.

Mar 04, 2016 | 2004 Lexus LS 430

1 Answer

Where is the release for the hood located


Hood release is on the drivers side, under the dash, close to steering column. Labeld 'Hood" and has an picture of a car with hood up.

May 05, 2012 | 1991 Cadillac Eldorado

1 Answer

The shift interlock button wont release the gear shift to go in park or drive


Its a simple fix - you just need to put your right hand underneath the dash, under the ignition switch with the stuck key, and feel around for the stiff transmission-shift-lock cable, and just giggle it about a bit. Try all directions, don't be aggressive with it; and eventually you will be able to turn the key to the LOCK position. Good luck

I took the cover off the steering column by removing 4 screws. (I had to remove the dash by removing 2 screws behind the Hood release and yanking the cover off. This is how you gain access to the two forward most bolts on the steering column cover.) From hear you should see the shift interlock on the top right of the sterring column. Pull the white lever to release the key lock. Turn the key to lock and remove your key.
I would then purchase a new interlock and replace it.

Mar 23, 2012 | 1999 Isuzu Rodeo

1 Answer

Parking brake wont release I pressed the foot pedal to set the brake; now it won't release in the usual fashion


The switch for the E brake realease is vacum operated and located in the steering colum. But it may be
as simple as a vacum line off under the dash. But for
the time being there is a manual release lever under the dash near the top of the e brake peddle.
Hope this helps.

Jul 06, 2010 | 1996 Cadillac DeVille

1 Answer

Cann't get door panal off of drivers side door on 1999 ford Expedition


Remove the screw covers from the arm rest and remove the screws. Use a one inch stiff putty knife and slide between the door and the door panel. Move it right or left until you hit the retaining clip. Gently pry the door panel upward until the clip releases. Repeat this all the way around the bottom & both sides. When all are released push the door panel upward releasing in from the edge of the window opening.

Feb 10, 2010 | 1999 Ford Expedition

1 Answer

I got a new battery for my audi a-4...now my radio wont turn on. i hear i need a code, but my radio wont even turn on for me to enter it. pep boys checked my fuses and said they are all fine...?


Yours radio has a burnt fuse in back right side of it (10A). You must extract the radio box out from dash panel in order to replace this burnt fuse. You need two special radio keys extracting tools. For Chorus and Concert AUDI radios use T10057 radio release tool:
1. Switch off all electrical equipment.
2. Remove ignition key.
3. Insert two radio release tools T10057 into slots on radio (bottom front side) until they engage.
4. Pointed ends of grips must face outwards.
5. Grasp hold of grips on radio release tool T10057 and pull radio out of dash panel.
6. Release and unplug electrical connectors at radio.
7. Press release tabs on radio and remove radio release tool T10057.
8. Replace the burnt fuse (10A) with new one.
9. Plug in all connectors.
10. Slide radio carefully into dash panel and engage it in mounting frame.

Dec 20, 2009 | 2004 Audi A4

1 Answer

INFINITII 35 Steering Column Wont release


Are you sure the steering wheel isn't putting pressure on the steering lock release mechanism? Pull the wheel slightly to the left and right while trying to turn on the ignition.

Jan 06, 2009 | 2004 Infiniti I35

1 Answer

1993 toy.p/u hood release wont open hood


Your cable anchor that holds the cable is loose or is pivoting causing your latch not to have full stroke. Hope this fixes your problem.

Dec 11, 2008 | 1995 Toyota Pickup

1 Answer

Emergency Brake


What model car? On my Cadillac the problem was the vacuum line to the release valve at the parking brake pedal. The problem can be the vacuum line, the release valve or the vacuum actuator for that release valve. Mine was on the steering column.

Oct 24, 2008 | 1989 Cadillac Sedan DeVille

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...